Puffco Peak Pro Manuale utente
PEAK PRO INSTRUCTION MANUAL
3
2
A
B
C
H
E
D
F
G
A: Loading tool
B: Dual Tools (5)
C: USB-C Cable
D: Joystick Cap
E: Jacket & Tether
F: 3D Chamber
G: Glass
H: Base
WHAT’S INSIDE:
What’s inside / p 3
What’s new / p 4
Quick start / p 4 - 6
Heat settings / p 7
Cleaning your device / p 8 - 9
Advanced features / p 10
Puffco Connect app / p 11
Troubleshooting / p 12
THE PUFFCO PEAK PRO
READ CAREFULLY!
Please read the entire instruction manual
before using your Peak Pro to get the
most out of your experience and avoid
damaging your device.
Visit Puffco.com/support
for how-to videos and helpful tips.
5
4
5
Use the included
loading tool or a
Puffco Dual Tool to
place extract on the
bottom surface of
the 3D Chamber.
Place the Joystick
Cap on top of 3D
Chamber, and press
down until snug.
To unlock / lock the
device, hold down
the button for 3
seconds.
Always remove glass
before filling. Using
the mouthpiece, fill
glass with water to
just above the vents.
X- Avoid allowing
water into lower
section.
3 4
6
X
To remove glass,
grasp the base and
gently pull glass
towards you. To
reattach, align inlet
hole with chamber
and gently press
glass into base.
Fully charge the device
before first use. The
logo will glow indicating
the battery level:
Red (Low)
Orange (Half)
Green (Full).
Tip: Open the Puffco Connect app for more advanced
battery info & customization.
Tip: Use the Puffco Hot Knife to drop your extract into the
3D Chamber with the push of a button.
1
WHAT’S NEW:
QUICK START:
2
3D Chamber
HOLD
Joystick Cap
LED Animations & Mood Lights
7
6
HEAT SETTINGS:
COLOR
CHOOSE A SETTING:
1. Ensure device is on.
2. Single-click button to toggle through each setting.
3. Double-click to initiate heat cycle.
Each heat setting offers a different experience.
We suggesting experimenting to find what
settings work best for you and your consumption
preference. No wrong answers.
Best for delicate extract.
Optimal flavor, least vapor.
LOW (FLAVOR) - 490°F
MED [BALANCED] - 510°F
The best of both worlds.
Balanced flavor and vapor.
HIGH [STRONG] - 530°F
Best for larger dabs.
More vapor, slightly less flavor.
PEAK [POWER] - 575°F
Delivers the biggest hits.
Most vapor, less flavor.
Default color & temperature settings. For more
customization options, use the Puffco Connect app.
Double-click button
to initiate heat cycle,
press & hold to
cancel. Pulsing light
indicates device is
heating up.
Clean chamber after
each use with a Dual
Tool or cotton swab.
Wipe gently in a
circular motion.
Device will vibrate
& flash twice when
ready.* For best
results, inhale gently
while rotating the
Joystick.
Single-click button to
toggle through each
heat setting.
White (Peak)
Red (High)
Green (Med)
Blue (Low)
x 1
7
x 2
910
8
*See p. 10 for advanced features.
9
8
Visit Puffco.com/support
for how-to videos and helpful tips.
CLEANING: BASE
1. Remove glass and
chamber from base.
2. Use a cotton swab soaked
in 90%+ isopropyl alcohol
to gently clean the gold
contact points and airpath
between the chamber
and glass.
3. Allow to air-dry completely
before reattaching
components. DO NOT rinse.
Do not allow water into
the base at any time.
1. Remove the Joystick
with Jacket & Tether, then
unscrew the 3D Chamber
from base.
2. Use a cotton swab to
gently remove any residue
with 90%+ isopropyl alcohol.
3. Submerge the chamber
in 90%+ isopropyl alcohol
for 20 minutes. Air-dry
completely before
reattaching. DO NOT rinse.
CLEANING: 3D CHAMBER
Isopropyl alcohol is highly flammable; allow
chamber to air-dry completely before reattaching.
Allow chamber to cool completely before handling.
CLEANING: GLASS
1. Carefully remove glass
from base.
2. Once removed, submerge
glass in 90%+ isopropyl
alcohol for 20 minutes.
3. After soaking, thoroughly
rinse glass with water
and let air-dry completely
before reattaching to base.
X- Avoid allowing water into
lower section.
X
11
10
PUFFCO CONNECT APP:
Hold the button for 6 seconds to initiate pairing
mode. Pulsing blue lights indicate your device is
ready to pair.
The Puffco Connect app has a wealth of new
features that allow you to customize your
experience, unlock special features, and more.
Visit Puffco.com/app-experience
to learn more.
BOOST MODE:
Boost Mode increases the time and temperature
of your hit. To activate, double-click to initiate
heat cycle, then double-click again once desired
temperature is reached.
By default, Boost Mode increases heat cycle
duration by 15 seconds & temperature by 10°F.
You can customize Boost Mode settings in the
Puffco Connect app.
STEALTH MODE:
Click the button four times rapidly to turn Stealth
Mode on/off. This disables the lights on your
device for greater discretion.
READY MODE:
*Puffco Connect app + Peak Pro Power Dock required*
Ready Mode automatically initiates your
selected heat cycle when you lift your Peak Pro
from the Peak Pro Power Dock.
Once your Peak Pro is paired with the Puffco
Connect app, enable Ready Mode in the app
settings.
ADVANCED FEATURES:
12
09
If you’re having anything less than a perfect
experience, reach out to our support team.
NEED HELP?
CONTACT US!
*Please do not return your Peak Pro to
the store.
*Keep your proof of purchase.
1. The Puffco Connect app
The Puffco Connect app gives us important
diagnostic information about your device. Fill
out a warranty claim form there for the fastest
service possible.
2. Visit Puffco.com/Support
FAQ’s, how-to videos, and other resources that
may solve your problem quickly.
SHARE THE VIEW:
Use #PuffcoPeak to share your experience.
Kindly follow us on Instagram!
@Puffco
ERROR CODES:
No chamber (white white white)
- Remove and reinsert chamber.
Chamber error (red white red white)
- Remove and clean chamber before reinserting.
Device overheating (red for 5 seconds)
- Allow device to cool before using.
Low battery (red red red)
- Ensure device is fully charged before using.
GENERAL WARNINGS:
TROUBLESHOOTING
• Do not overfill the chamber.
• Do not blow or exhale hard into the glass.
This will force water into the base.
• Do not store device with water in the glass,
unless you have the Puffco Travel Glass.
• Strong inhales may cause spillage and
damage to your chamber.
• Do not charge or operate in temperatures
beyond 32°F - 100°F
• Use only with the provided USB-C cable
• Keep away from moisture and high humidity.
• Store in a cool dark place when not in use.
• Chamber becomes hot while in use; use
caution when handling.
Visit Puffco.com/support
if error codes persist.
15
14
A
B
C
H
E
D
F
G
A: Herramienta
de carga
B: Herramientas
dobles (5)
C: Cable USB-C
D: Tapa de la palanca
de mando
E: Camisa y
ligadura
F: Cámara 3D
G: Cristal
H: Base
ELEMENTOS INCLUIDOS:
Elementos incluidos / pág. 3
Novedades / pág. 4
Inicio rápido / págs. 4-6
Ajustes de calor / pág. 7
Limpieza del dispositivo / págs. 8 - 9
Características avanzadas / pág. 10
Aplicación Puffco Connect / pág. 11
Resolución de problemas / pág. 12
EL PEAK PRO DE PUFFCO
LEER CON ATENCIÓN
Lea todo el manual de instrucciones antes
de utilizar su Peak Pro para aprovechar
al máximo su experiencia y evitar dañar
su dispositivo.
Visite Puffco.com/support
para ver vídeos de procedimientos
y consejos útiles.
17
16
5
Utilice la herramienta
de carga incluida
o una herramienta
doble Puffco para
colocar el extracto
en la superficie
inferior de la
cámara 3D.
Coloque la palanca
de mando en la
parte superior de
la cámara 3D y
presione hacia abajo
hasta que quede
ajustada.
Para desbloquear/
bloquear el
dispositivo,
mantenga pulsado
el botón durante
3 segundos.
Retire siempre el
cristal antes de
llenarlo. Usando
la boquilla, llene el
cristal con agua hasta
justo por encima
de los orificios de
ventilación. X- Evite
que entre agua en la
sección inferior.
3 4
6
X
Para retirar el cristal,
sujete la base y
tire suavemente
del cristal hacia
usted. Para volver a
acoplarlo, alinee el
orificio de entrada
con la cámara y
presione suavemente
el cristal para
encajarlo en la base.
Cargue por completo
el dispositivo antes
del primer uso. El
logotipo se iluminará
para indicar el nivel
de la batería:
Rojo (bajo)
Naranja (medio)
Verde (completo).
Consejo: Abra la aplicación Puffco Connect para obtener
información sobre la batería y opciones de
personalización más avanzadas.
Consejo: Utilice el cuchillo caliente Puffco Hot Knife para
introducir el extracto en la cámara 3D con solo
pulsar un botón.
1
NOVEDADES:
INICIO RÁPIDO:
2
Cámara 3D
MANTENER
PULSADO
Tapa de la palanca de mando
Animaciones LED y luces de
ambientación
19
18
AJUSTES DE CALOR:
COLOR
ELIJA UN AJUSTE:
1. Asegúrese de que el dispositivo esté encendido.
2. Para alternar entre los ajustes, haga un solo clic
en el botón.
3. Haga doble clic para iniciar el ciclo de calentamiento.
Cada ajuste de calor ofrece una experiencia
diferente. Sugerimos experimentar para encontrar
qué ajustes funcionan mejor para usted y su
preferencia de consumo. No hay respuestas
incorrectas.
Ideal para extractos delicados.
Sabor óptimo, mínimo vapor.
BAJO [SABOR]: 254°C
MEDIO [EQUILIBRADO]: 265°C
Lo mejor de ambos mundos.
Sabor y vapor equilibrados.
ALTO [FUERTE]: 277°C
Lo mejor para toques más grandes.
Más vapor, un poco menos de sabor.
PICO [POTENCIA]: 302 °C
Ofrece las mayores caladas.
Máximo vapor, menos sabor.
Ajustes predeterminados de color y temperatura. Para
obtener más opciones de personalización, utilice la
aplicación Puffco Connect.
Haga doble clic en
el botón para iniciar
el ciclo de calor;
manténgalo pulsado
para cancelar. La luz
intermitente indica
que el dispositivo se
está calentando.
Limpie la cámara
después de cada
uso con una
herramienta doble
o un bastoncillo de
algodón. Limpie
suavemente
realizando un
movimiento circular.
El dispositivo vibrará
y parpadeará dos
veces cuando
esté listo.* Para
obtener los mejores
resultados, inhale
suavemente
mientras hace girar
la palanca de mando.
Para alternar entre
los ajustes, haga
un solo un clic en el
botón.
Blanco (pico)
Rojo (alto)
Verde (medio)
Azul (bajo)
x 1
7
x 2
910
8
*Consulte la pág. 10 para conocer las funciones avanzadas.
Altri manuali per Peak Pro
4
Indice
Lingue:
Altri manuali Puffco Vaporizzatore
