Pulsar RAWO7 Manuale utente
Code: RAWO7
Name: 7U/150mm/17 Ah two-level RACK Security
enclosure for RACK19" cabinets
v1.0
EN
Edition: 1 from 25.01.2017
Supersedes the edition: --------------
1. Application:
The metal RAWO7 enclosure is designed for mounting the alarm control panel and the input/output modules in
RACK19” cabinets. The enclosure has a removable mounting plate (1st level) and a removable hinged mounting plate (2nd
level). The enclosure has a battery compartment for a single 7Ah/12V battery. The mounting plate (1st level) has holes for
mounting transformers of the TOR/TRP/TRZ series and power supply units of the PS…/PSB…/PSBOC… series by Pulsar.
The hinged mounting plate (level II) is fitted with universal holes for mounting of control panels and expansion modules of
the following companies: DSC, PARADOX, RISCO, SATEL, PYRONIX, TEXECOM, TELMOR, ROGER and EBS.
Fig.1
2. Mounting the enclosure to RACK 19” cabinets:
Mount cage nuts for M6 screws in the RACK cabinet, as shown in Figure 2. Use M6 screws to mount the enclosure
to the RACK profiles.
Fig.2
2
3. The introduction of cables into the enclosure:
The enclosure has four openings (at each side) for the introduction of cables. All openings are fitted with rubber
grommets, Fig. 3.
Fig.3
Wires can be introduced in three ways:
a) Through rubber grommets –fig.4
Fig.4
b) Using the MM019 / MM020 protection tubes - fig.5.
Fig. 5
3
c) Using the MM019 / MM020 protection tubes and the ARAP16P/ ARAP21P cable glands - fig.6
Fig. 6
4. Mounting the transformer/PSU/battery/other modules:
The enclosure is equipped with a hinged mounting plate (1st level) with holes for mounting of transformer of the
TOR/TRP/TRZ series and power supply units of the PS…/PSB…/PSBOC… series by Pulsar. The enclosure has a battery
compartment for a single 7Ah/12V battery.
Fig. 7
5. Securing wires to a hinged mounting plate:
The enclosure is equipped with a hinged mounting plate (2nd level) with holes for mounting of control panels and
expansion modules. Universal holes are dedicated for control panels and expansion modules of the following companies:
DSC, PARADOX, RISCO, SATEL, PYRONIX, CROW, and ROGER. The hinged mounting plate is fitted with handles to
secure the signal wires. Mounting of control panels / expansion modules / wires is shown in Fig. 8.
Fig. 8
4
6. Dimensioning:
7. Control panels and modules that can be mounted in the enclosure:
DSC: (PC 1616, 1832, 1864, 4020) + 5x 5108 ( 4108, 5208, 5100, 4116)
(PC 5204, 5400, 5200, 5580, 4216, 4204) + 5x 5108 ( 4108, 5208, 5100, 4116)
PARADOX: ( E55, E65, 728ULT, EVO48, EVO192, SP4000, SP5500, SP6000, SP7000) + 5 x Z X 8 ( Z X 4,
APR3-HUB2)
RISCO: PRO24, 116, 128, 140 + 3x EZ16
PRO24, 116, 128, 140 + 4x E04 (EZ08, RP296 EPS)
SATEL: CA4V1, CA5, CA6
(VERSA 5, 10, 15, CA10) + 5 x CA10E ( CA 64E, SM, MST1)
(INTEGRA 24, 32) + 5 x CA64E (SM)
Modules: CA64 ( PP, EPS, ADR, O-R, O-ROC,O-OC, OPS- OC, OPS- R, OPS- ROC,
VGM- 16, SR, PTSA) + 4x CA64E ( SM)
PYRONIX: MATRIX 424, 6, 816, 832, 832+
TEXECOM: PREMIER 412, 816, 832, 48, 88, 168, 640
TELMOR: TCA- 824, 4x (TEX800, TMT1)
ROGER: PR402, CPR 32-SE
EBS: PX 202A
PULSAR: 5x (MS1012, MSR1012, MSRK1012)
5x (MS2012, MSR2012, MSRK2012)
5
8. Technical parameters:
Battery compartment:
17Ah / 12V
Transformer / power supply
compartment:
TOR: 50÷150VA, TRP: 20÷80VA, TRZ: 20÷80VA / series Pulsar
PS..., PSB..., PSBOC...
Tamper protection:
2 x C/NO terminals (C/NC closed housing), 0,5A@30VDC/50VAC
Mounting dimensions:
W=19", H=7U
Enclosure dimensions:
W=430, H=310, D=150 mm
Net/gross weight:
6,20 / 6,75 [kg]
Finish:
steel plate 1mm, color RAL9005
Application:
Indoor
Notes:
- fixing on the front RACK 19'’ rails
- 10 M6 screws with cage nuts included
- the enclosure contains a mounting plate (Level I)
- the enclosure is equipped with a hinged mounting shelf
(Level II)
- universal holes in the enclosure for mounting of control panels and
expansion modules of the following companies: DSC, PARADOX,
RISCO, SATEL, PYRONIX, TEXECOM, TELMOR, ROGER, EBS
Available accessories:
- MM019 - protective tube ø16 / ø20 - power cord
- MM020 - protective tube ø21 / ø29 - signal wires
- ARAP16P - cable gland fi 16mm
- ARAP21P - cable gland fi 21mm
- transformers of the TOR/TRP/TRZ series: 20÷80VA
- power supplies PS..., PSB..., PSBOC... series
- batteries
Declarations, warranty
CE, 2 years from the production date
MANUFACTURER
Pulsar
Siedlec 150,
32-744 Łapczyca
Phone. (+48) 14-610-19-40, Fax. ( +48) 14-610-19-50
http:// www.pulsar.pl, www.zasilacze.pl
Altri manuali Pulsar Allegato
Pulsar
Pulsar ARAD4S Manuale utente
Pulsar
Pulsar AWO530 Manuale utente
Pulsar
Pulsar AWO 005PU Manuale utente
Pulsar
Pulsar AWO 350 Manuale utente
Pulsar
Pulsar 17/TRP40/PAR Manuale utente
Pulsar
Pulsar EXPANDER 2 Manuale utente
Pulsar
Pulsar ARAD1S Manuale utente
Pulsar
Pulsar 17/EIZ75/SATEL/G3 Manuale utente
Pulsar
Pulsar AWO 620 Manuale utente
Pulsar
Pulsar AWO529 Manuale utente
Pulsar
Pulsar AWO-270 Manuale utente
Pulsar
Pulsar AWO 317 Manuale utente
Pulsar
Pulsar IM401 Manuale utente
Pulsar
Pulsar AWO220 Manuale utente
Pulsar
Pulsar AWO 453 Manuale utente
Pulsar
Pulsar AWO 200K Manuale utente
Pulsar
Pulsar RS4281 Manuale utente
Pulsar
Pulsar AWO 220PU Manuale utente
Pulsar
Pulsar 17/50/SATEL/PUSTA Manuale utente
Pulsar
Pulsar AWO 229 Manuale utente
