Pulsar PSC12010 Manuale utente

PSC12010

PSC 12V/1A/55MM power supply

v.2.0

Edition: 12 from 22.05.2023

Supercedes edition: 11 from 20.11.2020

Features:

power output 1 A/12 V DC*

universal supply voltage range ~100 - 240 V

high efficiency 86%

standby power <0,1 W

efficiency class: VI

IP 67 enclosure

protections:

short-circuit protection SCP

surge protection (AC input)

overload protection OLP

warranty –2 years from production date

1. Technical description.

1.1.General description.

The PSU is intended for ~230 V mains supply to CCTV cameras that require stabilised voltage of 12 V DC.

The unit is protected against a short circuit and an overload and a surge.

1.2. Specifications.

Supply voltage

~100 - 240 V; 50/60 Hz

Current consumption

0,3 A

Supply power

12 W max.

Efficiency (average)

86%

Efficiency (10% load)

81%

Output voltage

12 V DC

Output current tAMB<30°C

1 A instantaneous current - refer to chart 1.

Output current tAMB=40°C

0,7 A - refer to chart 1.

Ripple voltage

100 mV p-p max.

Short-circuit protection SCP

electronic, automatic recovery

Overload protection OLP

105-150% of power supply, automatic recovery

IP protection class

IP67

Operating conditions

Temperature: 0oC - 40oC, relative humidity 20%...90%,

without condensation

Dimensions (LxWxH)

50 x 48 x 25 [mm]

Net/gross weight

0,09 / 0,125 [kg]

Protection class EN 62368-1

II (second)

Length of DC cable

0,5 m + plug DC5,5/2,1 female

Length of AC cable

0,3 m

Storage temperature

-20ºC...+60ºC

* In order to extend the life of the power supply, the load current of 0,7 A is recommended.

Chart 1.

Relation between output current and ambient

temperature (instantaneous load).

Fig.1. Mechanical view and dimensions of the PSU.

*Refer to chart 1

1.3. Accessories.

Available accessories for the power supplies are: fuse blocks and cable adapters. For details –visit www.pulsar.pl

2. Installation.

2.1. Requirements.

The power supply shall be mounted by a qualified installer, holding relevant permits and licenses (applicable and

required for a given country) with ~230 V mains supply. Unit should be mounted in confined spaces with normal relative

humidity (RH=90% maximum, without condensing) and temperature from 0°C to +40°C

The device should be installed in the metallic enclosure (cabinet, intended device). In order to meet the LVD and EMC

requirements, the rules concerning: supply, development and shielding ought to be followed - accordingly to the application.

2.2. Installation procedure.

1. Fit the power supply inside the box or other device.

2. Connect the DC cables to the load or to the terminal block.

3. Connect the power supply to the AC line.

4. After tests and operation control are performed, close installation box, case etc. and switch on the power.

3. Maintenance.

Any and all maintenance operations may be performed following the disconnection of the power supply from the power

network. The power supply does not require any specific maintenance procedures, however, in the case of significant level of

dust, it should be cleaned with compressed air.

WEEE LABEL

Waste electrical and electronic equipment must not be disposed of with normal household waste.

According to European Union WEEE Directive, waste electrical and electronic equipment should

be disposed of separately from normal household waste.

Pulsar sp. j.

Siedlec 150,

32-744 Łapczyca, Poland

Tel. (+48) 14-610-19-45

e-mail: [email protected]

http:// www.pulsar.pl

Altri manuali Pulsar Alimentazione elettrica

Pulsar

Pulsar PSA12015 Manuale utente

Pulsar

Pulsar PSU-B-13,8V/S-3,5A/1/EL-TR-17Ah/MC Manuale utente

Pulsar

Pulsar PSBOC351225 Manuale utente

Pulsar

Pulsar PSU-U-24V/AC-4A/4/FTA/PTC-TR-MC Manuale utente

Pulsar

Pulsar PSDC16128T Manuale utente

Pulsar

Pulsar PSDC161212T Manuale utente

Pulsar

Pulsar PSA12030 Manuale utente

Pulsar

Pulsar PSBOC30024100 Manuale utente

Pulsar

Pulsar ROUPS12VR Manuale utente

Pulsar

Pulsar PSBS 2512B Manuale utente

Pulsar

Pulsar PSAC 04244SEP Manuale utente

Pulsar

Pulsar PSCV2012 Manuale utente

Pulsar

Pulsar PSCV3512 Manuale utente

Pulsar

Pulsar PSBEN 3024C Manuale utente

Pulsar

Pulsar EN54-7A28LCD Manuale utente

Pulsar

Pulsar POE1648C Manuale utente

Pulsar

Pulsar AWZ101 Manuale utente

Pulsar

Pulsar HPSBB 0212 Manuale utente

Pulsar

Pulsar RUPS1612RP Manuale utente

Pulsar

Pulsar Blue Power PSBS 5012E Manuale utente

Pulsar

Pulsar RAC24P Manuale utente

Pulsar

Pulsar HPSB 2512C Manuale utente

Pulsar

Pulsar HADOC 2048B Manuale utente

Pulsar

Pulsar PSBOC15512110 Manuale utente

Manuali Alimentazione elettrica popolari di altre marche

Monacor

Monacor PS-12CCD Manuale utente

VOLTIMA

VOLTIMA MagicBox 15 Manuale utente

Agilent Technologies

Agilent Technologies 6032A Manuale utente

Miller

Miller Auto Deltaweld 452 Manuale utente

BCP

BCP PUOUBK Foglio di istruzioni

HC 2210 Manuale utente

Puls

Puls CT5.241 Manuale utente

OCZ

OCZ ZX1250W Manuale utente

iseg

iseg ECH 238 Manuale utente

Power

Power XXL A Series Manuale utente

Agilent Technologies

Agilent Technologies 6631B Manuale utente

Renogy

Renogy PHOENIX 300 Manuale utente

HP 6200B Manuale di servizio

Epson

Epson Stylus Scan 2500 Manuale operativo

Puls

Puls MiniLine ML50.100 Manuale utente

Puls

Puls AS-Interface SLA4.100 Manuale utente

Kenwood

Kenwood PS-60 Manuale utente

Elmdene

Elmdene G1380xN-y-s Series Manuale utente