Pulsar PSD12050 Manuale utente

PSD12050

PSD 12V/5A Desktop type power supply for CCTV

v.2.0

Edition: 10 from 19.05.2023

Supercedes edition: 9 from 22.01.2018 EN

Features of power supply:

power output 5A/12 V DC*

universal AC input voltage range ~100 –240 V

high efficiency 89%

LED optical signalisation

standby power <0,21W

efficiency level: VI

protections:

SCP short-circuit protection

overvoltage protection (AC input)

overload (OLP)

warranty –2 years from production date

1. Technical description.

1.1. General description.

Stabilized DC power supply is intended for supply CCTV cameras that require stabilised voltage of 12V DC.

The unit has a cable with a DC5.5/2.1 plug. When connected to fuse blocks of LB4/xx/xx or LB8/xx/xx family, power supply unit

can feed more cameras (max. 4 or 8). The unit is protected against short-circuit and overload.

1.2. Technical parameters.

Supply voltage

~100 –240 V; 50/60 Hz

Current consumption

1,2 A

Supply power

60 W max.

Efficiency (average)

89%

Efficiency (10% load)

88%

Output voltage

12 V DC

Output current tAMB<30°C

5A - refer to graph 1.

Output current tAMB=40°C

3,5A - refer to graph 1.

Ripple voltage

100mV p-p max.

Short-circuit protection SCP

electronic, automatic recovery

Overload protection OLP

105-150% of power supply, automatic recovery

Optical signalisation

LED –presence of DC voltage

Operation conditions

temperature 0oC - 40oC

relative humidity 20%...90%, without condensation

Dimensions (LxWxH)

116 x 54 (80) x 35 [mm]

Net/gross weight

0,30 / 0,34 [kg]

Protection class EN 62368-1

II (second)

Lenght of DC cable

1,45m + plug DC5,5/2,1 female

Lenght of AC cable

1,15m + mains plug

Storage temperature

-20ºC...+60ºC

* In order to extend the life of the power supply, the load current of 3,5A is recommended.

Graph 1.

Relation between output current and ambient

Fig.1. Dimension of power supply.

*Refer to graph 1

temperature (instantaneous load).

1.3. Accessories.

For power supplies are available accessories - fuse blocks and cable adapter. For details –visit www.pulsar.pl.

2. Installation.

2.1. Requirements.

The power supply shall be mounted by a qualified installer, holding relevant permits and licenses (applicable and required for

a given country) with ~230 V mains supply. Unit should be mounted in confined spaces with normal relative humidity (RH=90%

maximum, without condensing) and temperature from 0°C to +40°C

The power supply shall be mounted in a close casing (a cubicle, a terminal device) and in order to fulfill LVD and EMC

requirements the rules for power supplies, encasing and shielding shall be observed according to application.

2.2. Installation procedure.

1. Connect the DC output to the load/loads.

2. Connect the power supply unit to the AC line. The power supply has to be installed in such way to keep the air flow

around the supply unit.

3. After tests and operation control are performed, the casing (cubicle) shall be closed etc.

3. Maintenance.

Any and all maintenance operations may be performed following the disconnection of the power supply from the power

network. The power supply does not require any specific maintenance procedures, however, in the case of significant level of dust, it

should be cleaned with the compressed air.

WEEE LABEL

Waste electrical and electronic equipment must not be disposed of with normal household waste.

According to European Union WEEE Directive, waste electrical and electronic equipment should

be disposed of separately from normal household waste.

Pulsar sp. j.

Siedlec 150,

32-744 Łapczyca, Poland

Tel. (+48) 14-610-19-45

e-mail: [email protected]

http:// www.pulsar.pl

Altri manuali Pulsar Alimentazione elettrica

Pulsar

Pulsar PSB351225 Manuale utente

Pulsar

Pulsar GREEN POWER CCTV PoE POE044812B Manuale utente

Pulsar

Pulsar PSDCR161214 Manuale utente

Pulsar

Pulsar RUPS812T Manuale utente

Pulsar

Pulsar PSBEN 3024C Manuale utente

Pulsar

Pulsar PSBOC751250 Manuale utente

Pulsar

Pulsar PSDC 08124 Manuale utente

Pulsar

Pulsar SWB-120 Manuale utente

Pulsar

Pulsar PSCL12010 Manuale utente

Pulsar

Pulsar PSCV3512 Manuale utente

Pulsar

Pulsar PSDC161216T Manuale utente

Pulsar

Pulsar Blue Power PSBS 5012E Manuale utente

Pulsar

Pulsar PSBEN 5024C Manuale utente

Pulsar

Pulsar APSDC2410A Manuale utente

Pulsar

Pulsar HPSB 2512C Manuale utente

Pulsar

Pulsar PSBEN 1012B/LCD Manuale utente

Pulsar

Pulsar AWZ 521 Manuale utente

Pulsar

Pulsar PSBEN 10A12C Manuale utente

Pulsar

Pulsar PSCL12015 Manuale utente

Pulsar

Pulsar HPSDCSEP-12V4x1A Manuale utente

Pulsar

Pulsar RAC24P Manuale utente

Pulsar

Pulsar GREEN POWER PLUS HPSBOC 7012C Manuale utente

Pulsar

Pulsar PSBSH 1012B Manuale utente

Pulsar

Pulsar PSC13008 Manuale utente

Manuali Alimentazione elettrica popolari di altre marche

Monacor

Monacor PS-12CCD Manuale utente

VOLTIMA

VOLTIMA MagicBox 15 Manuale utente

Agilent Technologies

Agilent Technologies 6032A Manuale utente

Miller

Miller Auto Deltaweld 452 Manuale utente

BCP

BCP PUOUBK Foglio di istruzioni

HC 2210 Manuale utente

Puls

Puls CT5.241 Manuale utente

OCZ

OCZ ZX1250W Manuale utente

iseg

iseg ECH 238 Manuale utente

Power

Power XXL A Series Manuale utente

Agilent Technologies

Agilent Technologies 6631B Manuale utente

Renogy

Renogy PHOENIX 300 Manuale utente

HP 6200B Manuale di servizio

Epson

Epson Stylus Scan 2500 Manuale operativo

Puls

Puls MiniLine ML50.100 Manuale utente

Puls

Puls AS-Interface SLA4.100 Manuale utente

Kenwood

Kenwood PS-60 Manuale utente

Elmdene

Elmdene G1380xN-y-s Series Manuale utente