Pure Fun Seesaw Manuale utente
Pure Fun Seesaw
Model No. 9300SS
Owner’s Manual
Please read all the instructions before using this product.
Consult a physician before beginning any exercise program or strenuous activity.
Do not allow more than one person on the trampoline at any time.
Do not allow small children to use unless supervised by an adult.
ADULT ASSEMBLY REQUIRED.
Please visit www.pureglobalbrands.com to register your product
to ensure warranty coverage.
Pure Fun is a Trademark of
Pure Global Brands, Inc.
This contents of this package
are not suitable for children
under 3 years of age.
Contains small parts which
may cause choking.
Age Recommendation:
4 +
OWNERS MANUAL
CUSTOMER SERVICE INFORMATION
Thank you for purchasing our Pure Fun™ Seesaw
At Pure Global Brands, we want all of our customers to be completely satised with their purchase.
Please take time to review the contents of the product you have just received to make sure that all
of the parts are included. If you nd that any parts are missing or damaged, we will happily provide
replacement parts at no charge within 30 days of purchase. Please keep in mind that for select dam-
aged part replacement requests, we will require a photo for submission to our quality control ofce.
To order these parts, or if you have any other questions or concerns about this Pure Global product,
please e-mail the Pure Global Brands, Inc. customer service department at:
[email protected] or contact us at 1-866-498-5269. You can also visit our website at:
www.pureglobalbrands.com
If you request replacement parts, please be sure to include the following information in your corre-
spondence:
YOUR NAME
YOUR MAILING ADDRESS
YOUR EMAIL ADDRESS
RETAILER WHERE YOU PURCHASED PRODUCT
DATE OF PURCHASE
ORDER # (IF AVAILABLE)
PRODUCT MODEL #: 9300SS
SERIAL #
PRODUCT NAME: Seesaw
PART # (located in manual)
QUANTITY NEEDED
PICTURE OF DAMAGED PART(s) – SUBMIT VIA Email , Fax, or Mail
Again, thank you for purchasing a Pure Global Brands product.
Sincerely,
Customer Service
Pure Global Brands, Inc.
Phone: 1-866-498-5269
Email: [email protected]
8040 Belvedere Rd.
West Palm Beach, FL 33411
LIMITED WARRANTY
Pure Global Brands, Inc. warrants this product to be free from defects in workmanship and materials
under normal use and conditions for the duration of the period outlined below FROM THE DATE OF
ORIGINAL PURCHASE. This Limited Warranty is not transferable and is available only for the origi-
nal purchaser of the Product.
The various components of the trampoline/enclosure are warranted against defects and workmanship
for the following time period(s):
• Steel Frame: 2 Years
• All Other Parts: 90 Days
All warranty coverage extends only to the original retail purchaser from the date of purchase.
Pure Fun’s obligation under this Warranty is limited to replacing or repairing, at Pure Fun’s option, the
product at one of its authorized service centers. All products for which a warranty claim is made must
be received by Pure Fun at one of its authorized service centers and accompanied by sufcient proof
of purchase (photocopy of the original store receipt, indicating the date of purchase). All freight and
handling fees are the responsibility of the consumer to pay, both to and from Pure Fun. All warranty
claims must be pre-authorized by Pure Fun. Pre-authorization can be obtained by calling 866-498-
5269. This warranty does not extend to any product or damage to a product caused by or attributable
to freight damage, abuse, misuse, improper or abnormal usage, or repairs not provided by a Pure
Fun authorized service center or for products used for commercial or rental purposes. This warranty
does not cover ordinary wear and tear, weathering, failure to follow directions, improper installation,
improper maintenance or acts of Nature (such as damage caused by wind, lightning, snow, water or
ice). Weather damage, damage caused by unauthorized repair work or damage caused by improper
use of the products are not covered by the product warranty. No other Warranty beyond that speci-
cally set forth above is authorized by Pure Fun.
PURE FUN IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CON-
SEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO
ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS,
LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORDINGLY, THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. THE WARRANTY EXTENDED HERE-
UNDER IS IN LIEU OF ALL OTHER WARRANTIES AND PURE FUN SPECIFICALLY
DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO THE TERMS
SET FORTH HEREIN. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG
AN IMPLIED WARRANTY LASTS. ACCORDINGLY, THE ABOVE LIMITATION MAY
NOT APPLY TO YOU.
This warranty gives you specic legal rights. You may also have other rights, which vary from state to
state.
WARNING
CHOKING HAZARD – Small parts
NOT for children under 3 years.
Warning
While every attempt is made to ensure the highest degree of protection in all
equipment, we cannot guarantee freedom from injury. The user assumes all risks
of injury due to use. All merchandise is sold on this condition, which no
representative of the company can waive or change.
WARNINGS
IMPORTANT – PLEASE READ!
Please read these warnings and the information in this manual in its entirety. Failure to comply with the
following instructions may increase the risk of serious injury and/or death:
● Please read the instructions entirely before use and retain for future reference.
● This unit must be assembled and disassembled by ADULTS ONLY.
● This seesaw is suitable for use by most children 4 to 10 YEARS OF AGE.
● DO NOT exceed the MAXIMUM WEIGHT limit of 75lbs PER SEAT (35kgs) regardless of age.
● DO NOT install this equipment over concrete, asphalt, or any other hard, rough surface. The seesaw should always be
installed over an appropriate, stable surface (rubber mat, grass, etc).
● ALWAYS locate this equipment on a stable, level surface AT LEAST 7 feet from any structure, obstruction, or possible
hazard(s) such as walls, pools, power lines, overhangs, other playground equipment, driveways, hard surfaces and/or
roadways.
● Children must be supervised at all times when using this equipment. DO NOT leave children unattended at any time.
● This seesaw is NOT for adult or adolescent use.
● This seesaw is only designed for family residential use. It is NOT intended for commercial applications and/or use in
public areas such as schools, parks, nurseries, day schools, day cares, etc.
● DO NOT allow more than two children on the seesaw at a time. It is also strongly recommended that the children using
this seesaw be the same approximate age, weight and height.
● DO NOT wear glasses or helmets when using the seesaw.
● DO NOT wear loose tting clothing, clothing with straps/loops, backpacks or wear and/or hold accessories with straps or
loops, or any article of clothing or accessory with sharp edges which may present a hazard or become snagged or caught
on the seesaw during use. Serious injury and/or accidental strangulation may occur.
● DO NOT place objects on or under or allow people and pets to stand or sit on, near or under the seesaw when in use.
● DO NOT stand on the seats or hang from the steel tubing – this can cause serious injury.
● DO NOT allow a child to jump from or suddenly dismount the seesaw, as serious injury may occur both to the remaining
child and the child dismounting.
● ALWAYS remain securely seated with both hands rmly on the Handle Bars during use.
● Smaller children will require assistance dismounting from the seesaw.
● DO NOT use or allow use of the seesaw while under the inuence of any substance or medication which may impair the
supervisor’s or user’s judgement and/or coordination.
● DO NOT use in adverse weather conditions, while the seats are wet, or in poorly lit conditions.
● NEVER jump from the seats or climb up or down the steel tubing.
● ALWAYS secure the seesaw against unauthorized and unsupervised use.
● ALWAYS wear footwear (i.e. closed toe shoes) when using the seesaw.
● Before each use of this product, inspect and replace any worn, defective or missing parts. Although the seesaw is made
to take a lot of wear, over time parts may need to be replaced. It is important to check the seesaw to ensure the frame is
steady and all parts are in good condition.
● Please read and refer to other warnings and use information in the seesaw instructions before use.
Dispose of all packaging materials safely and per local ordinance.
PRIOR TO ASSEMBLING:
Please visit: www.pureglobalbrands.com for any important product information updates
and/or additional safety warnings before assembling or using this product.
Use search word: 9300SS
When you are ready to start, make sure that you have the correct tools at hand, and adequate space
for assembly. Please refer to the table for part descriptions and numbers. The assembly instruction
uses these descriptions and numbers as reference. Make sure you have all parts listed. If you are
missing any parts, please contact customer service at [email protected] or by calling
866-498-5269.
IMPORTANT: USE GLOVES TO PROTECT AGAINST PINCH POINTS DURING ASSEMBLY.
Enclosed are the current specications and product features available at time of
printing, however, changes may be made in equipment, availability, specications
and features without notice.
Tools Required: 1. Philips Head Screwdriver, 2. 10mm Wrench, 3. 13mm Wrench
A.
B.
C.
D.
D1.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
U.
V.
W.
X.
Z.
PARTS LIST
STEP 1: Seat and Handlebar Assembly
A. Attach the Seats:
Secure a plastic seat (N) onto each end of the Side Bars (K) using 4x M6 25mm Bolts (E), 8x M6 Washers
(F), 4x Lock Washers (G), and 4x Nuts (P), as shown in Figure 1. Make sure that the Lock Washer is resting
against each Nut.
B. Attach the Handlebars:
Afx the a Handlebar (M) to each of the Side Bars (K) using 2x M6 45mm Bolts, 4x M6 Washers (F), 2x Lock
Washers (G), and 2x Nuts (P) as shown in Figure 2. Make sure that the Lock Washer is resting against each
Nut.
STEP 2: Main Bar Assembly
A. Attach the Side Bars to the Main Bar:
First slide a Small Plastic Tube (V) onto the end of each Side Bar (K) you assembled. Next, slide the bars
into the Main Center Bar (H) as shown in Figure 3.
B. Select Side Bar Bolt Formation:
Formation 1: Secure with 2x M6 60mm Bolts (B) 4x M6 Washers (F), 2x Lock washers (G), using the lower
right diagram in Figure 4.
Formation 2: Secure with 2x M6 60mm Bolts (B) 4x M6 Washers (F), 2x Lock washers (G) 1x M6 50mm Bolt
(D1), 2x M6 Washers (F), and 1x Lock Washer (G) using the left diagram in Figure 4.
It is recommended that you start off with the bars at equal lengths, and adjust only if necessary due to a signi-
cant difference in height or weight of the children using this seesaw. If you do not use the D1 bolts, be certain
that you keep these bolts in a safe place in case they are needed in the future.
D1
STEP 3: Seesaw Base Assembly
WARNING: To avoid your ngers becoming caught during assembly,
you must attach the bolts only as noted below.
A. Attach 2x Seesaw Legs (L) to the Lower Support Tube:
Using 2x M6 110mm Bolts, 4x M6 Washers, 4x M6 Lock Washers, and 2x Nuts attach 2 Legs (L) to the Lower
Support Tube (J) as shown in the diagram. NOTE: The (L) Legs must go into the upper pair of pre-drilled Bolt
Holes in the Support Tube.
B. Attach remaining 2x Seesaw Legs (O) to the Lower Support Tube:
Using 2x M6 110mm Bolts, 4x M6 Washers, 4x M6 Lock Washers, and 2x Nuts attach 2 Legs (O) to the Lower
Support Tube (J) as shown in the diagram. NOTE: The (O) Legs must go into the lower pair of pre-drilled Bolt
Holes in the Support Tube.
STEP 4: Swivel Assembly
A. Attach the Swivel to the Main Bar:
First slide the Plastic Tube (W) onto the end of the Upper Support Swivel (I). Next, line up the Upper Sup-
port to the Hole in the center of the Main Bar. Secure the Swivel to the Main Bar using the 70mm Hex Bolt (C),
2x M8 Washers (S), 1x M8 Lock Washer (T), and 1x M8 Nut (U).
B. Join the Upper and Lower Assemblies:
Insert the completed Main Bar Assembly into the Seesaw Base Assembly. Ensure the Plastic Tube (W) re-
mains securely afxed. Lastly, insert a Plastic Cap (X) into each Leg End.
CARE AND MAINTENANCE
Your seesaw is designed to be very low maintenance.
● If any part of the seesaw requires cleaning, simply wipe with a damp cloth and let air dry before use.
● Regularly check to see if the Main Center Bar, Swivel, Seats, Handle Bars, other attaching parts
are well seated, tightened and completely secure. Replace worn & damaged parts when necessary.
● If the paint is chipped, we recommend you lightly rub the damaged area and cover using a non-
toxic enamel paint.
● After any extended period of non-use, and periodically in between regular uses, make sure to use a
lubricating oil on the swivel mechanism and other moving parts.
●
IMPORTANT: While no regular maintenance is required, you MUST inspect the seesaw before each
use and replace any worn, defective, or missing parts. The following conditions could represent
potential hazards: Missing, improperly positioned, or insecurely attached seats or handle bars, A im-
properly secured or unseated Main Center Bar, A bent or broken frame, and/or Bent or buckled Legs.
Cease using the seesaw immediately and secure it against unauthorized use if any of these condi-
tions are present.
FREQUENTLY ASKED QUESTIONS
Question: “How should I clean my seesaw?”
Answer: YOU SHOULD CLEAN THE SEESAW WITH A SOLUTION OF WARM WATER AND
NON-CORROSIVE/ABRASIVE SOAP. DAMPEN A RAG WITH THIS SOLUTION AND WIPE
COMPLETELY DRY BEFORE USING.
Question: “Is there any maintenance I need to do for my seesaw?”
Answer: YOU SHOULD ALWAYS DOUBLE CHECK TO MAKE SURE ALL YOUR BOLTS ARE
TIGHT AND SECURE, AND THAT THE MAIN CENTER BAR IS FIRMLY SEATED BEFORE EACH
USE. YOU SHOULD ALSO PERIODICALLY LUBRICATE THE CENTER SWIVEL AND BEFORE
RESUMING USE AFTER A PERIOD OF INACTIVITY.
Question: “A seat or Handle Bar seems loose, what should I do?”
Answer: MAKE SURE THE BOLTS UNDER THE PLASTIC SEATS AND/OR THE HANDLE BAR
BOLTS ARE TIGHT AND SECURE.
Question: “Something was missing from the packaging,” “I need to purchase a replacement part”
or “I discovered a damaged piece. What should I do?”
Answer: CONTACT PURE FITNESS CUSTOMER SERVICE. YOU MUST HAVE YOUR PROOF
OF PURCHASE AND/OR ORDER CONFIRMATION AVAILABLE TO BE CONSIDERED FOR
WARRANTY REPLACEMENT. YOU MUST REPORT MISSING PIECES WITHIN 30 DAYS FROM
DATE OF PURCHASE. PLEASE BE AWARE THAT UNDER OUR LIMITED WARRANTY, FOR SOME
PARTS WE REQUIRE A PICTURE OF THE DAMAGED ITEM AND/OR RETURN OF THE ITEM TO
OUR QUALITY CONTROL OFFICE FOR REVIEW.
Customer Service
E-mail: customerservice@puregbi.com
Phone: 866-498-5269 (M-F 9am - 5pm)
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Pure Fun Altalena
Manuali Altalena popolari di altre marche
Ledon
Ledon 1185 Manuale utente
Backyard
Backyard LITTLE BRUTUS 2051171 Manuale per l'uso e la cura
Component Playgrounds
Component Playgrounds CP-PS24-8x10 Manuale utente
Kettler
Kettler 0S01053-0000 Manuale utente
Lemeks
Lemeks Palmako MV70-3121-4 Manuale dell'installatore
Lifetime
Lifetime 90143 Manuale utente
Component Playgrounds
Component Playgrounds AF30 Manuale utente
OOGarden
OOGarden FOSSA Manuale utente
Lakeland Mills
Lakeland Mills CF1128 Manuale utente
Backyard Discovery
Backyard Discovery MONTPELIER 30211F Manuale utente
LifeSpan Kids
LifeSpan Kids AMBER PE83 Manuale utente
SPORTSPOWER
SPORTSPOWER MSC- 4132 Istruzioni per l'installazione