PURE Contour Manuale utente
Owner’s Manual
This is the Owner’s Manual for your
Contour. It expands on the Quickstart
provided with the radio and covers more
functions.
You can click on any section in the
bookmarks list on the left to jump to
that page, or use PDF search to find a
specific word or phrase in the manual.
2
Important Safety Instructions
1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug the apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or
plug is damaged, does not operate normally, or has been dropped.
12. Do not install this equipment in a confined space. The ventilation should not be impeded by covering the ventilation openings.
13. To reduce the risk of electric shock, do not remove cover as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
14. Should not be immersed in water, used in shower or bathroom.
15. Separation distance of at least 20cm must be maintained between the antenna of the product and all persons.
3
Contents
Quick guide to controls and connectors ........................................................................................4
Using the alarm and timers ............................................................................................................6
Setting the clock............................................................................................................................7
Using a Pure mini USB adapter to connect to your network...........................................................8
Pure Connect (The Lounge)...........................................................................................................9
Connecting Contour to Pure Connect (The Lounge).......................................................................9
The Lounge settings (Pure Connect settings)...............................................................................10
Pure Flowserver...........................................................................................................................11
Media player settings...................................................................................................................12
Network settings .........................................................................................................................13
FM settings..................................................................................................................................14
Display settings ...........................................................................................................................15
Audio settings..............................................................................................................................17
Additional settings .......................................................................................................................17
Help and advice...........................................................................................................................18
Technical Specifications...............................................................................................................19
4
Top panel
Front panel
Rear connectors
20 V DC Aux In Composite
Video Out
Component
/S-Video
Standby
Tap to switch
between on and
standby
Home
Tap to return
to the audio
source screen
Volume up
Tap or hold to
raise volume
Volume down
Tap or hold to
lower volume
Navigation buttons
Tap to navigate and
select menu options
Mute
Tap to mute
Back
Tap to go back
one step
Context-sensitive buttons
Active buttons are lit and the
function is displayed on-screen
above the button
20V DC input
Input for mains
adapter
Headphones
3.5 mm socket
for stereo
headphones
Aux In
3.5 mm
connection
for auxiliary
devices
Component/S-Video
3.5mm video output from a
docked iPod/iPhone. (Pure
Choice accessory cables
available separately.)
Composite
Phono video output
from a docked iPod/
iPhone. Connect to a
TV or monitor
Mini USB
For software
updates and
optional Pure
Ethernet adapter
Quick guide to controls and connectors
5
Media Player/iPod only
Shuffle - play tracks in a
random order
Repeat – Toggle repeat
all or repeat current track
Video Switch between
Component/S-Video
and Composite
video output.
Media player/Podcast/Listen Again/iPod
Play/pause current track.
Skip to start of current track or go to
previous track. Hold to rewind.
Skip to end of current track or start of
the next track. Hold to fast forward.
Add or recall a
favorite station
Options Change setup options
Change on-screen
information
Navigate menus
OK Confirm a selection
Home. Display the
audio source screen
Increase the volume
Decrease the volume
Back. Go back one step
Remote control
Switch between On and Standby Mute audio
Sources Select a source to
listen to
Sleep Press to start sleep timer
Repeat to increase time
Alarm Set and adjust alarms
Tone Adjust bass and treble
Context-sensitive
(match buttons on front panel)
Left [ ]
Centre [ ]
Right [ ]
6
Contour has two alarms, a kitchen timer and sleep timer. To access the alarm and timers, tap
Options and select Alarm or timer.
Setting an alarm
1. Select Alarm 1 settings or Alarm 2 settings. The current settings for that alarm will be displayed.
2. Tap Edit to adjust the alarm settings.
3. Use the navigation buttons to change settings. Tap the arrows at the bottom of the screen to
move forward or back through the settings.
4. To save settings and exit at any time, tap Save (this is useful if you want to change a single
setting, such as the alarm time).
Setting an alarm step-by-step
1. Select On to switch the alarm on or Off to switch the alarm off. The current status is displayed
on the top line of the screen.
2. Adjust the hours and minutes for your alarm time using the navigation buttons.
3. Select when you want the alarm to sound: Once, Daily, Weekdays, Weekends, Every Saturday
or Every Sunday
4. Choose either Lounge station, FM, iPod or Tone for your alarm:
Lounge station Select a station from your Lounge favorites, or choose Last tuned and the
alarm will tune to the most recent Lounge station you listened to.
FM Plays the last FM station that Contour was tuned to.
iPod Plays the last track listened to on your iPod or iPhone. Sounds a tone alarm if
no iPod or iPhone is detected.
Tone Sounds a beeping tone.
5. Tap Save – your alarm is now set. The icon is displayed when an alarm is set. Alarm time(s)
are displayed on-screen in standby.
Using the alarm and timers
An alarm will sound for a maximum of one hour before canceling automatically.
Alarm 1 On
Edit
07:00 DR
Last tuned
Daily (Mon-Sun)
Current alarm settings
7
The clock will automatically set itself using your Wi-Fi or Ethernet connection. However, if you
cannot receive an updated time, or see the message ‘Time not available’, the time and date can
be manually set by selecting Set Clock from the Alarm or timer menu. Use the navigation buttons
to adjust the time and date. Tap or to move to the previous or next setting.
Snoozing or canceling a sounding alarm
Cancel the alarm by tapping Standby ( ), or snooze the alarm for 9 minutes by tapping Snooze.
Adjusting the Snooze timer
From the Alarm or timer menu, select Snooze time. Use the navigation buttons to adjust the
duration of the snooze from 5 to 15, then either 20/25/30/40 minutes, or 1 hour.
Setting the sleep timer
The sleep timer switches Contour into standby after a set period of time. From the Alarm or timer
menu, select Sleep timer. Use the navigation buttons to adjust the length of the sleep timer in 15
minute steps from 15 mins to 1 hour 30 mins. A set sleep timer is indicated by in the icon bar.
Setting the kitchen timer
The kitchen timer sounds a beeping tone after a set period of time.
From the Alarm or timer menu select Kitchen timer and use the navigation buttons to adjust the
length of time. Tap mins to toggle between minutes and hours. Tap Save to confirm.
A set kitchen timer is indicated by in the icon bar.
Canceling a sounding timer
To cancel a sounding timer, tap Standby ( ). A sounding timer will automatically cancel after 1 hour.
Setting the clock
00:15
Sleep timer (hh:mm)
OKClear Save Menu
00:45
Kitchen timer: set mins
Clear Save Hours
Adjusting the sleep timer
Setting the kitchen timer
8
Using a Pure mini USB adapter to connect to your network
The Pure mini USB adapter provides a wired connection for Contour. Connect an Ethernet (RJ45)
cable from your network router to the socket on the adapter and connect the adapter to the mini
USB port on the rear of Contour.
Setup your connection
If you selected USB Ethernet as your connection type during the first start up of Contour (or after a
factory reset), you should now be connected to your network.
If you wish to change your connection type to USB Ethernet, please do the following:
From either the Lounge (Pure Connect) or Media Player, tap Options and navigate to Network
settings > Select Network type. Select USB Ethernet. Contour will apply the new setting and connect
to your network.
The status of your connection is indicated by the network status icon on Contour’s display:
Active wired connection Wired connection inactive/disconnected
Adapter status lights
100Mbps Lit when adapter is working at full connection speed (100 Megabits per second)
LAN Flashes on and off to indicate network activity
USB Lit when correctly connected to Contour USB port
RJ45 Socket
Connect the cable from your
internet router here
Mini USB connector
For connecting the adapter to
Contour
Status lights
Lit when active (see above)
Troubleshooting
• If any of the status lights do not light up, check that all cable connections are secure, and that
both Contour and your internet connection are working correctly.
• We recommend performing a Factory reset on Contour (Press and hold Options until you see
the Factory reset confirmation screen). This will restore Contour’s network settings to their
default and you will be able to reselect Ethernet as your connection type.
9
Pure Connect (The Lounge)
Pure Connect (formerly known as The Lounge) is an online media portal that provides you with
quick and easy access to thousands of internet radio stations, on-demand programmes, podcasts
and ambient sounds. You can enjoy all this content on your Contour, on smartphones and tablets
running the Pure Connect app, and on the Pure Connect website. You can also use Pure Connect
to access additional subscription services such as the Pure Connect’s cloud-based music
streaming service*, which provides you with instant access to millions of music tracks.
To access Pure Connect on Contour, you will need to connect Contour to your network. See below
for more information.
After connecting Contour to your network, you can register your Contour on the Pure Connect
website. We recommend registering your Contour as this allows you to manage your Pure Connect
favorites and access additional services like music streaming and Pure Tag.
1. Log in to Pure Connect, click Me and select Devices. You’ll see your registration code.
2. From Lounge settings on Contour, select Register with The Lounge to enter your code.
Use the navigation buttons to highlight and select characters; tap Del to erase characters; and
tap Save to finish.
Congratulations! You’ve registered your Contour on Pure Connect. The favorites you’ve created on
Pure Connect will be visible on your Contour, and those you’ve created on Contour will appear on
Pure Connect.
Connecting Contour to Pure Connect (The Lounge)
Pure Connect home page
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
sp0123456789
Enter registration code
DelSaveMore...
QPZKE
1. Add Contour as a new device 2. Enter the code on Contour 3. Contour is connected to
Pure Connect
*Requires a Pure Connect subscription.
10
The Lounge settings (Pure Connect settings)
The Lounge settings
Clear favourites
View/change radio name
Register with the Lounge
Lounge (Pure Connect) registration
code entry screen
Changing your Contour’s name
Lounge (Pure Connect)
settings screen
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
sp0123456789
Enter registration code
DelSaveMore...
QPZKE
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
sp0123456789
Enter radio name
DelSaveMore...
Jenny’s Room
Tap Options from The Lounge (Pure Connect),then select Network settings to view options for
your Lounge (Pure Connect) preferences.
Clear favorites
Select Clear favorites to remove all stations/podcasts/Pure Sounds from your favorites list, as well
as from Pure Connect if Contour is connected.
View/Change radio name
You can rename Contour to help identify it more easily when using Pure Connect website. By
default this name is ‘My Contour’. To change this, Select View/Change radio name. The current
name is at the top of the screen. Use the navigation buttons to enter a new name and tap Save to
confirm.
Register with the Lounge (Pure Connect)
Enter your Pure Connect registration code if you have not already done so.
Altri manuali per Contour
3
Indice
Altri manuali PURE Altoparlanti docking
