PureLink SX-8800 Manuale utente
SX-8800
Seamless UHD Matrix
USER MANUAL
PureLinkTM
220-10 State Route 208
Fair Lawn, NJ 07410 USA
Tel: +1.201.488.3232
Fax: +1.201.621.6118
E-mail: sales@purelinkav.com
For order support, please contact your local dealer.
For technical support, please contact us at support@purelinkav.com.
SX-8800 User Manual Version 1.0 2
Warning
⚫Do not expose this device to Rain, Moisture, and Dripping
⚫Only use accessories specified by the manufacture
⚫Unplug this device during Lightning Storms
⚫Product specifications may be subject to technical upgrades without further notice
SX-8800 User Manual Version 1.0 3
Content
Introduction ..................................................................................................................................................................5
Front Panel Control .......................................................................................................................................................5
Rear Panel .....................................................................................................................................................................6
RS232/LAN Control........................................................................................................................................................ 8
RS232 connector ................................................................................................................................................... 8
Ethernet control and connection...........................................................................................................................8
PC tool user guide.......................................................................................................................................................... 9
Account’s authentication.......................................................................................................................................9
Password modification..........................................................................................................................................9
Connect with PC tool ...........................................................................................................................................10
Matrix Switch page .............................................................................................................................................. 11
Signal Setting page............................................................................................................................................... 12
Finetune ..............................................................................................................................................................13
Video Wall ........................................................................................................................................................... 14
Build a wall ..........................................................................................................................................................14
Bezel adjust ......................................................................................................................................................... 15
Multi Video wall .................................................................................................................................................. 16
Multi View with TV Wall......................................................................................................................................17
Save scene/ Load scene....................................................................................................................................... 17
Advanced route switch page...............................................................................................................................18
Control via Web...........................................................................................................................................................18
Electrical parameters................................................................................................................................................... 18
Package Contents........................................................................................................................................................19
Appendix A: Query IP info via UART............................................................................................................................. 19
Appendix B: Query IP address info via Network ..........................................................................................................20
Appendix C: Set IP info via UART ................................................................................................................................. 21
Appendix D: Set IP info via Network ............................................................................................................................21
Appendix E: Set IP address on Windows 7 or XP.......................................................................................................... 22
SX-8800 User Manual Version 1.0 4
Appendix F: Direct connect via Ethernet cable............................................................................................................24
Appendix G: Connect via network route /switch ........................................................................................................25
Appendix H: Troubleshoot with Network control ........................................................................................................25
Appendix I: Advanced routing switch ..........................................................................................................................26
Appendix J: Change List ( VS V2 version )..................................................................................................................... 29
SX-8800 User Manual Version 1.0 5
Introduction
SX-8800 provides seamless switching of up to (8) HDMI 2.0 inputs and outputs and incorporates the latest
technologies available on the market including HDR and HDCP 2.2 compliance. The SX-8800 matrix
switchers also feature a built-in web page interface/software allowing convenient set-up, user access,
control, and operation. It also features audio extraction as well as audio insertion. Together with video
wall function/advanced EDID management and added security features, the SX series delivers a true, first-
in-class Ultra HD multi-zone signal distribution solution ideal for corporate conferencing, education, and
hospitality environments, to name a few.
SX-8800 Key Features:
•Support HDMI 2.0/HDCP 2.2
•Support seamless switching
•Support video wall
•Support IR matrix
•Support HDMI audio extract
•Support external LR audio insert on HDMI stream
•Support EDID management
•HDMI video output resolution up to 3840x2160@60
•Front panel, RS232, TCP/IP (LAN 10M/100M) control
Front Panel Control
⚫OUTPUT/INPUT buttons
Press buttons OUTPUT n + INPUT m+ TAKE by sequence, switch matrix input n to output m
⚫Press button POWER and hold for 5 seconds, to make the matrix enter standby state.
Press button POWER and hold for 1 seconds to power on the matrix
⚫Press button LOCK more than 2 seconds and less than 6 seconds, to lock or un-lock front buttons.
SX-8800 User Manual Version 1.0 6
When locked, the Lock LED lighted.
Press button LOCK more than 6 seconds, enter the input output lock menu, then press IN n
Or OUTPUT button to toggle the input or output lock status, then press TAKE to set,
Press CLEAR to exit.
⚫Press buttons ALL + INPUT m + TAKE by sequence, to switch input m to all the outputs
⚫Press button SAVE + OUTPUT n to save current routing scene as scene n. The maximum available
scene No. is 8
⚫Press button RECALL + OUTPUT n to recall routing scene n as current routing
⚫Press button RES + OUTPUT n + NEXT + TAKE, to change output resolution of OUTPUT n
Resolution options:
3840x2160@60, 3840x2160@50, 3840x2160@30, 3840x2160@25,
1920x1200@60,1920x1080@60, 1920x1080@50, 1600x1200@60,
1400x1050@60, 1366x768@60,1360x768@60,1280x1024@60,
1280x768@60,1280x720@60, 1280x720@50, 1024x768@60
⚫Press buttons EDID + INPUT m + NEXT + TAKE, change the EDID mode of port INPUT m
EDID option:
Manual, 3840x2160@60, 3840x2160@30, 1920x1200@60,
1920x1080@60, 1280x1024@60, 1280x720@60, 1024x768@60
Manual EDID is loaded by PC Tool
Rear Panel
⚫LAN (10M/100M), RS232 for PC control
⚫Analog Audio IN/OUT ports bind to corresponding HDMI ports.
Example:
If HDMI 1 audio source is selected with External LR by PC Tool, then analog AUDIO IN LR1 (with ф3.5mm jacket)
will be selected to replace the embedded audio of the HDMI input 1 data stream. If HDMI 1 audio source is
selected with AUTO by PC TOOL, then will use the original embedded audio of input HDMI 1 as its audio data
stream.
SX-8800 User Manual Version 1.0 7
If input is DVI signal, no matter how it is set up, system will get external analog audio input. Analog AUDIO OUT n
will always output the same audio content with HDMI OUTPUT n Analog Audio IN/OUT connection
⚫IR IN and IR OUT
IR IN/OUT is for remote control routing and follow the video routing.
For example, if input HDMI m is routed to output HDMI n1 and n2 ports, then IR IN n1 and n2 ports will be
routed to IR OUT m port. Please refer bellow illustration.
Relationship between video and IR routing
IR extender connectors (not as accessories)
Analog
Audio
SX-8800 User Manual Version 1.0 8
RS232/LAN Control
RS232 connector
⚫RS-232 control, baud rate 9600, DB9 connector
⚫Port RS232-1 is DB9 female connector, Pins layout as bellow. User needs use the corresponding cable,
directly/straight RS232 cable
Baud rate 9600
⚫RS232-2 and IR-EXT ports are reserved for future development
Ethernet control and connection
Note：Factory default network setting：
I
ndex
Pin
1
N/u
2
Tx( Matrix →
PC) PC )
3
Rx( Matrix ←PC
)
4
N/u
5
Gnd
6
N/u
7
N/u
8
N/u
9
N/u
SX-8800 User Manual Version 1.0 9
PC tool user guide
Account’s authentication
When you run the PC tool, there needs password to authenticate.
Default password of Administrator（access to all features）：111111
Default password of User（access to all features, except OSD function）：000000
NOTE：In case of password lost, there’s a admin password to login and modify password: Smartsecuri@2010
Password modification
1. Click drop-down list to select account: Administrator or User
2. Input current password, then click the ‘modify’ button to authenticate
3. Input new password twice, then click the ‘modify’ button
SX-8800 User Manual Version 1.0
10
Connect with PC tool
1. The default PC tool’s UI style as bellow
2. User can select UART (with RS232 cable) or Network to connect, baud rate is 9600 bps
3. Network control (with cat5/6 cable, default IP address, 192.168,0.247), follow below steps:
a) Query IP address info via UART, please refer to Appendix A
Or query IP address info via Network, please refer to Appendix B
b) Set IP info via UART, please refer to Appendix C
Or set IP info via Network, please refer to Appendix D
c) Set IP address on Windows 7/XP, please refer to Appendix E
d) User can directly connect via Ethernet cable (please refer to Appendix F ),
Or connect via network route/switch (please refer to Appendix G )
Indice
Altri manuali PureLink Commutatore a matrice
PureLink
PureLink PT-MA-HD44 Manuale utente
PureLink
PureLink HTX Series Manuale utente
PureLink
PureLink PT-MA-HD44-QV Manuale utente
PureLink
PureLink UX Series Manuale utente
PureLink
PureLink UX Series Istruzioni per l'installazione
PureLink
PureLink PT-MA-HD88-C Manuale utente
PureLink
PureLink HTX-8800-U Manuale utente
PureLink
PureLink HTX III-4400 Manuale utente
PureLink
PureLink PureTools PT-MA-HDBT42 Manuale utente
PureLink
PureLink PT-MA-HD88 Manuale utente
