PureTools PT-HDBT-1002 Manuale utente
User Manual
PT-HDBT-1002
1
User Manual
4K HDBaseT 2.0™ Extender w/ HDMI® & USB 2.0 KVM support
Model PT-HDBT-1002
Designed in Germany
© 2018 PureLink GmbH All rights reserved. Version 1.0
User Manual
PT-HDBT-1002
2
Preface
Read this user manual carefully before using the product. Pictures are shown in this manual for
reference only. Dierent model layouts and specications are subject to the physical product.
This manual is for operation instructions only, not for any maintenance usage.
In the constant eort to improve our product, we reserve the right to make changes in
functions or parameters without prior notice or obligation.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this manual are
acknowledged as the properties of the trademark owner. No part of this publication may be
copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which case
the user at their own expense will be required to take whatever measures may be necessary
to correct the interference
Any changes or modications not expressly approved by the manufacture would void the
user’s authority to operate the equipment.
REACH | 1907/2006/EU
ROHS | 2011/65/EU
PureLink hereby declares that this product PureTools PT-HDBT-1002 complies with Directives
1907/2006/EU and 2011/65/EU.
User Manual
PT-HDBT-1002
3
EMC / LVD (Electro Magnetic Compatibility /
Low Voltage Directive)
PureLink GmbH hereby declares that this product PureTools PT-HDBT-1002 complies with
Directives 2014/30/EU and 2014/35/EU. The full text of the EU Declaration of Conformity is
available at the following Internet address:
http://www.purelink.de/ce/4251364715277_CE.pdf
User Manual
PT-HDBT-1002
4
SAFETY PRECAUTIONS
• To insure the best from the product, please read all instructions carefully before using the
device. Save this manual for further reference.
• Unpack the equipment carefully and save the original box and packing material for possible
future shipment.
• Follow basic safety precautions to reduce the risk of re, electrical shock and injury to
persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or
burn.
• Using supplies or parts not meeting the products’ specications may cause damage, deteri-
oration or malfunction.
• Refer all servicing to qualied service personnel.
• To prevent re or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you
to dangerous voltage or other hazards.
• Install the device in a place with ne ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in re, electrical shock, or equipment damage. If an
object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household
waste, please treat them as normal electrical wastes.
User Manual
PT-HDBT-1002
5
Contents
1. Product Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2 Packing List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. System Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.1 Usage Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.2 System Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.3 Connection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. Specication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. Panel Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. Troubleshooting & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
User Manual
PT-HDBT-1002
6
1. Product Introduction
Compliant with HDMI 2.0 & HDCP 2.2, the HDBaseT 2.0 KVM Extender Set PT-HDBT-1002 from
PureTools is a 4K HDMI Extender set consisting of transmitter and receiver and developed
with the latest HDBaseT™ 2.0 technology to extend uncompressed HDMI video, audio, USB
2.0, control signals and PoC over a single CAT5e/6 cable. The unidirectional PoC compliant
extender comes with only one power supply; the receiver can be powered via the transmitter.
1.1 Features
• Compatible with HDMI1.4 and backwards compatible with all previous HDMI standards,
delivering high-resolution AV signals up to FullHD / 1080p, 3D, 4K@60Hz
• Supports HDBT2.0, transmitting a 1080p / 4K@60 (4:2:0) signal in up to 100m over a single
Cat.6 cable
• EDID Pass-Through
• HDCP2.2 compliant
• Front panel status LEDs for power, link & HDCP
• USB & RS232 control
• Unidirectional PoC (Power over Cable)
1.2 Packing List
• 1 x PT-HDBT-1002 Transmitter
• 1 x PT-HDBT-1002 Receiver
• 4 x Detachable Mounting Ears
• 4 x Screws
• 1 x Power Adapter (DC 12V 2A)
• 8 x Plastic Cushions
• 1 x User manual
Note: Please contact your distributor immediately if any damage or defect in the components
is found.
User Manual
PT-HDBT-1002
7
2. Panel Description
2.1 Transmitter
No. Name Description
1 Indicators
Power:
• OFF: No power
• RED: DC power present
ON: Working status indicator
• OFF: Not operational
• Blinking GREEN: Normal operation
LINK: HDBT Link status indicator
• OFF: No Link
• GREEN: Link successful
• Blinking GREEN: Link problem
HDCP: HDCP compliant indicator
• OFF: No HDMI tra c(no picture)
• GREEN: HDMI signal with HDCP
• Blinking GREEN: HDMI signal without HDCP
Front
Rear
User Manual
PT-HDBT-1002
8
No. Name Description
2FW
Micro USB port, used for rmware update.
Firmware updated need auxiliary equipment,
please contact with our after-sales department for
more details.
3 HDMI IN Connect with HDMI source.
4 HDBT OUT
Connect to the HDBT IN port on rear panel of the
Receiver via CAT5e/CAT6a cable, compliant with
HDBT2.0 and support unidirectional PoC to power
the Receiver.
5USB OUT Type-B USB port, connect to PC to receive remote
USB control
6RS232
Serial port, connects with control device or device
to be controlled, supports bi-directional RS232
control.
7 DC 12V Connect with a DC12V 2A power adapter.
! Pictures for reference only, subject to our existing products.
2.2 Receiver
Front
Rear
User Manual
PT-HDBT-1002
9
No. Name Description
1 Indicators
Power:
• OFF: No power
• RED: DC power present
ON: Working status indicator
• OFF: Not operational
• Blinking GREEN: Normal operation
LINK: HDBT Link status indicator
• OFF: No Link
• GREEN: Link successful
• Blinking GREEN: Link problem
HDCP: HDCP compliant indicator
• OFF: No HDMI trac(no picture)
• GREEN: HDMI signal with HDCP
• Blinking GREEN: HDMI signal without HDCP
2FW
Micro USB port, used for rmware update.
Firmware updated need auxiliary equipment,
please contact with our after-sales department for
more details.
3HDMI OUT Connect with HDMI display.
4HDBT IN Connect to the HDBT OUT port on the Transmitter
via CAT5e/ CAT6a cable, compliant with HDBT2.0.
5 USB IN Type-A USB ports, connect to mouse/ keyboard/
U-disk for remote USB access.
6RS232
Serial port, connects with control device or device
to be controlled, supports bi-directional RS232
control.
User Manual
PT-HDBT-1002
10
3. System Connection
3.1 Usage Precautions
• Make sure all components and accessories are included before installation.
• System should be installed in a clean environment with proper temperature and humidity.
• All of the power switches, plugs, sockets, and power cords should be insulated and safe.
• All devices should be connected before power on.
3.2 System Diagram
Indice
Altri manuali PureTools Estensione
