PYE PPAC12 Manuale utente

12,000 BTU Portable Air Conditioner

Model: PPAC12

User Manual

READ AND SAVE THESE INSTRUCTIONS

CONTENTS

Important Safe Guards

Safety…….........................................................................3

Product Introduction

Identification…………………...............................................5

Control Panel and Remote Control......................................6

Product Operation

Installation..........................................................................7

Operation……….................................................................9

Cleaning and Maintenance

Water drainage .................................................................10

Maintenance......................................................................10

Common Failures and Diagnosis

Error Detection..................................................................12

Fuse Parameters...............................................................12

Trouble-shooting................................................................12

Dear Customer,

Thank you for purchasing our PYE Portable Air Conditioner. Please be sure to read this

user manual carefully before using it.

BEFORE FIRST USE

Read and follow the instructions in this user manual even if you feel you are familiar with

the product, and find a place to keep it handy for future reference.

For your convenience record the model number (located on the product identification plate)

and the date you received the product, together with your purchase receipt and attach to

the warranty and service information. Retain your proof of purchase in the event that

warranty service is required.

NOTE: the rating of this product (as marked on the product identification plate) is based

on specific loading tests. Normal use or the use of other recommended attachments may

draw significantly less power.

IMPORTANT SAFEGUARDS

When using any electrically powered product, basic safety precautions should

always be followed, including the following:

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT

SAFETY

•Read all instructions.

•Always operate the product from a power source of the same voltage,

frequency and rating as indicated on the product identification plate.

•Disconnect the power plug before dismantling, assembling or before cleaning.

•Avoid touching mobile parts of the appliance.

•Do not use the appliance for any other purpose other than its intended use.

•Do not operate this product with a damaged cord or plug, or after the product

malfunctions, or appears damaged in any way. If the supply cord is damaged,

it must be replaced by the manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

•This appliance is for indoor use only.

•Keep the appliance away from heat sources, and direct sunlight.

•Never insert fingers, pencils, or any other objects through the air vent guards

whenever the power plug is connected, especially while running.

•Always switch off the appliance before unplugging it.

•The appliance is not intended for use by young children or infirm persons

unless they have been adequately supervised by a responsible person to

ensure that they can use the unit safely. Young children should be supervised

to ensure that they do not play with the appliance.

•This appliance is not to be used by children or persons with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge unless

they have been given supervision or instruction.

•When using the appliance never leave the appliance unsupervised when in

use. Switch off the appliance if you have to leave for even a short period of

time.

•Never use the mains point switch as a switch to start and turn off the air

conditioning unit. Use the provided On/Off switch located on the control panel.

•Do not use this appliance with an extension cord, unless it has been checked

and tested by a qualified electrician or electrical supplier.

•Always place the portable air conditioner on a dry stable surface.

•The air conditioning unit must always be stored and transported upright,

otherwise you may cause irreparable damage to the compressor; in case of

any doubt after moving the appliance we suggest to wait for at least 24 hours

before you start the air-conditioning unit.

•Always unplug the appliance before cleaning or changing any parts of the

appliance, or when it’s not in use.

•Never immerse the appliance in water or any other liquid.

•If the power cord is not long enough, an extension cord can be used. The cord

should not be in a well trafficked area as people can trip over the cord and pull

the plug out of the socket.

•Clean the appliance according to the User Manual.

•Do not repair the appliance by yourself. Any possible hazard incurred by

maintenance of the general public will void the warranty. The power cord

should be replaced by a qualified electrician.

•Please use the accessories provided by the manufacturer; otherwise, the

appliance may be damaged.

SPECIAL RECOMMENDATION

•Ensure that the appliance is positioned on a flat, large, dry surface without any

obstacles nearby. A minimum distance from furniture and walls is 50cm in all

directions.

•The plug should be easily accessible.

•In order to maintain the function of the compressor, the appliance should

always be in a vertical position.

•Do not use the appliance near gas or other flammable liquids.

•Do not block the air outlet or the air inlet ventilation.

•Do not use spray (insecticides, paint) or any other flammable products near

the appliance as the plastic may become deformed. The unit may also sustain

electrical damage.

POWER SOURCE

•The plug should be well secured and not damaged.

•Do not plug in the appliance with an adaptor.

•Plug into the wall socket before switching on the appliance, and then press the

ON/OFF button.

THE MANUFACTURER WILL NOT ASSUME ANY RESPONSIBILITY FOR

NON COMPLIANCE OF INSTRUCTIONS. KEEP THIS USER MANUAL FOR

FUTURE REFERENCE.

IDENTIFICATION

1. Handle

2. Air inlet (L)

3. Control panel

4. Louver

5. Castor

6. Remote control

7. Air inlet (R)

8. Air outlet

9. Dehumidification drainage nozzle

10. Air inlet grille

11. Exhaust pipe assembly

12. Window slider kit

CONTROL PANEL & REMOTE CONTROL

1. Power On/Off button

Press the button toturn On/Off.

2. Auto-swing button

Press this key at any time after turning on the appliance to swing

the louvers automatically.

3. Speed button

Press the key to choose high/ Mid /low fan speed.

4. Temperature/time adjusting button

Press the key at cooling mode to increase/reduce the setting

temperature; press it at timing mode to adjust timing ON/OFF

time; press Up and Down keys simultaneously to switch

Fahrenheit and Centigrade degree temperature.

5. Mode button

Press the key to choose cooling, fan, dehumidifying and

auto-mode

6. Timer button

Press the key at standby mode to set TURN-ON time.

Press this key set TURN-OFF time when the unit is on.

7. Temperature/ time display window

This window displays the adjusted temperature and time.

8. Remote controller receiving window

This window is used toreceive signal of remote control.

9. °C/℉button

Press the key to switch from ℃to ℉and vice versa.

Note:To achieve maximum cooling,please press Timer+Up

button on the unit control panel.

INSTALLATION

Placement

Place it in an even and dry place, and keep it at least 50cm away from any

surroundings.

Installation

Screw the exhaust pipe assembly into the air outlet in the back panel (anticlockwise).

Insert the air exhaust hose into the window slider kit, adjust the opening width of the

window so that the window slider kit width matches properly; the length of the kit is

adjustable.

Incorrect installation:

•It’s important to keep the exhaust pipe smooth, and with no bends. Incorrect

mounting can contribute to the efficiency of the air conditioner.

•Ensure that the air can flow freely through the pipe.

Warning:

The exhaust pipe is designed especially for this model. Do not replace or lengthen it;

otherwise it will result in failure.

Notice:

Maximum length of the exhaust pipe is 1500mm. It’s better to keep it the shortest

length possible and keep it horizontal.

OPERATION

Cooling mode

•When the A/C enters cooling mode after it’s turned on, the cooling indicator

will light up.

•Press the Up/Down button to adjust the temperature (17°-30°).

•Press the Speed button to choose High/Low fan speed.

Fan mode

•When pressing the mode button or choosing the fan mode by pressing the

remote control, the wind indicator will light up.

•Press the Speed button to choose High/Low fan speed.

•Temperature cannot be set when fan mode is selected.

Dehumidifying mode

•When pressing the mode button or choosing the

dehumidifying mode by pressing the remote control, the

dehumidifying indicator will light up.

•Remove the dehumidification water drainage nozzle,

insert the water pipe, and place the other end of the

water pipe into the water vessel (bucket – not supplied)

or into a drainage passage, as shown in the right figure.

•After entering the dehumidifying mode, if the room

temperature is more than 15°, the compressor will work.

When room temperature is less than 13°, the compressor switches OFF; when

the temperature increases to more than 15°, the compressor will restart (in

order to protect the compressor, it will restart 3 minutes later).

•In dehumidifying mode, the fan is defaulted to run at low speed, and the fan

speed cannot be adjusted.

•Temperature cannot be set.

NOTE: When choosing the dehumidifying mode, please remove the exhaust pipe,

otherwise it will affect the dehumidifying performance and make the display window

show “FL”.

Auto-mode

•When pressing the mode button or choosing auto-mode by pressing the

remote control, the auto indicator will light up.

•After choosing auto-mode, the operation state is determined by ambient

temperature: when the ambient temperature is higher than 25°, the operation

state is the same as that of the cooling mode; when the ambient temperature

is lower than 25° the operation state is the same as that of the fan mode.

Max cool mode

•Press the “Max Cool” button on the remote control whilst in cooling mode to

utilize maximum cooling.

•In Max Cool mode, the A/C will cool regardless of the temperature.

•In Max Cool mode, the fan speed is high, and it cannot be adjusted.

Timer mode

•When the appliance is in standby mood, press the button to turn the timer on.

Press the Up and Down keys to set the timer (0~24H), and the timer indicator

will light up.

•Press the timer button to turn off the timer when the unit is on.

WATER DRAINAGE

This product is equipped with an automatic water evaporative system. The

condenser is cooled with the circulation of condensed water, which improves

cooling efficiency and saves energy.

•If the internal vessel is full of water, the display screen will

display “FL”, and the compressor will stop working automatically.

After you power off the appliance, unscrew the water cover, pull

out the water plug to drain all of the water out. Once drained, it

will restart again.

MAINTENANCE

Note: in order to avoid electric shock, please turn off the A/C and unplug the

plug before maintenance or repair.

Cleaning

•Switch off and unplug the appliance before cleaning.

•Wipe with a soft damp cloth. Do not use chemical solvents, such as benzene,

alcohol and gasoline etc; otherwise the surface of the A/C will be damaged.

•Prevent any water from coming into contact with the A/C.

Filter

•Wash the filters every two weeks. If it is blocked by dust, the cooling efficiency

of the appliance will be reduced.

•Take out the air inlet grille and pull out the filters from both sides.

•Wash the filters in warm soapy water (neutral detergent), dry it in a shady

place once clean.

Indice

Altri manuali PYE Condizionatore d'aria

PYE

PYE PPAC15 Manuale utente

PYE

PYE ACP1 Manuale utente

Manuali Condizionatore d'aria popolari di altre marche

Spheros

Spheros CC 355 Manuale utente

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuale utente

Panasonic

Panasonic CS-E12HKEW Manuale utente

nedis

nedis ACMB1WT7 Manuale utente

Samsung

Samsung AR KV Series Guida

Daikin

Daikin FCFV50A Manuale utente

Fujitsu

Fujitsu Inverter ASBA30JFC Manuale utente

Toshiba

Toshiba RAS-M10SMUV-E Manuale utente

Daikin

Daikin FXLQ20MAVE Manuale utente

Hitachi

Hitachi RAS-E24CAK Manuale utente

CIAT

CIAT Magister 2 Series Guida

Bestron

Bestron AAC6000 Manuale utente

Hisense

Hisense 7K Manuale tecnico

Frigidaire

Frigidaire FFRE0533S1E0 Manuale utente

Samsung

Samsung AS09HM3N Manuale utente

Frigidaire

Frigidaire CRA073PU11 Manuale del proprietario

Soleus Air

Soleus Air GB-PAC-08E4 Manuale utente

McQuay

McQuay MCK020A Manuale utente