PYLE Audio PLCD18MRMP Manuale utente
OWNER’S MANUAL
Mobile Audio System
•PLL Synthesizer Stereo Radio
•Digital Compact Disc Player/MP3 Player
•Automatic Memory Storing
•Slide Down Detachable Panel
•Program CD Tracks
•Electronic Shockproof (ESP) Function
•CD Changer Control
•Auxiliary Input Function
PLCD18MRMP
www.pyleaudio.com
2
CONTENTS
Installation .....................................................................................................3
DIN Front-Mount....................................................................................................3
Installing the unit.............................................................................................3
Removing the unit...........................................................................................4
Using the Detachable Front Panel .............................................................5
Wiring Connection ........................................................................................6
Operation .......................................................................................................7
General Operation ..............................................................................................11
Radio Operation .................................................................................................13
CD Operation ......................................................................................................14
CD Changer Operation .......................................................................................15
MP3 Operation ....................................................................................................15
Specification................................................................................................18
Trouble Shooting.........................................................................................19
Notes:
•The unit can be installed on the vehicle
or the ships.
•Choose the mounting location where
the unit will not interfere with the normal
driving function of the driver.
•Before finally installing the unit, connect
the wiring temporarily and make sure
it is all connected up properly and the
unit and the system work properly.
•Use only the parts included with the
unit to ensure proper installation. The
use of unauthorized parts can cause
malfunctions.
•Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle or
the ship.
•Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
•If installation angel exceeds 30¢Xfrom
horizontal, the unit might not give its
optimum performance.
30˚
•Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
TAKE OUT SCREW BEFORE INSTALL
Before install the unit, please remove the
two screws.
NOTE: If this unit is installed on the ship,
you should use two pieces of plastic film
(30mmX20mm) supplied with the unit to
seal the two holes after remove the
screws. And this will be waterproof.
DIN FRONT-MOUNT
Installing the unit
1. Dashboard
2. Holder
After inserting the holder into the
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and bend them
inwards to secure the holder in place.
3. Screw
3
INSTALLATION
(Fig. 1)
1
3
2
182
53
Take out screws before installation
4
INSTALLATION
(Fig. 2)
1
2
6
5
4
3
7
OPEN button
Front Panel
1
2
1. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (5x25mm)
5. Screw
6. Strap
Be sure to use the strap to secure the
back of the unit in place. The strap can
be bent by hand to the desired angle.
7. Plain washer
Removing the unit
1. Before removing the unit, press the
OPEN button to slide down the front
panel.
2. Lever
Insert the levers supplied with the unit
into the grooves in the housing as
shown in figure until they click. Pulling
the levers makes it possible to remove
the unit from the dashboard.
5
Bottom
Button
Bottom
Button
Protective Case
Front Panel
Front Panel
USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1. Press the OPEN button, the front panel
will slide down.
2. When the front panel slides down,
press the bottom button of the front
panel upward and pull it out from the
panel bracket.
3. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
To Reinstall the Front Panel
1. When the panel bracket is in slide down
position, insert the front panel into the
panel bracket and push the front panel
from the middle to slide it up.
2. When the panel bracket is in slide up
position, insert a side of the front panel
to its proper position and push another
side into the panel bracket, a ‘click’
sound should be heard.
3. Note that if the front panel fails to lock
in position properly, pressing control
button may not function and LCD
display may be missing some
segments. Press the OPEN button and
then re-install the front panel again.
Open
6
WIRING CONNECTION
FRONT Lch
SPEAKER
GREEN
GREEN/BLACK
MEMORY
BACK-UP
MAIN UNIT
Rch RED
Lch WHITE
AUX IN
IGNITION
SWITCH (B+)
POWER
ANTENNA
RED
GROUND (B–)
YELLOW
BLACK
BLUE
REAR RCA CABLE
(YELLOW)
ANTENNA SOCKET
(GREY) Rch RED
Lch WHITE
WHITE
WHITE/BLACK
REAR Lch
SPEAKER
CD CHANGER
CONNECTOR
SOCKET
(BLACK)
VIOLET
VIOLET/BLACK
GREY
GREY/BLACK
FRONT Rch
SPEAKER
REAR Rch
SPEAKER
WIRING
REMOTE
CONNECTOR
SOCKET
(BLACK)
CONTROL & FUNCTIONS KEYS
This unit is a marine rated wired remote control made using a modified controller or
similar layout. It is capable of operation specified functions on the marine AM/FM/CD
receiver and the marine AM/FM/Cassette receiver. The body, buttons, controls and
display need to be UV and water-resistant. It includes and LCD and an illumination
circuit. The flat body should be watertight and the circuit board clear coated.
1 Power button
Press the button (1) shortly to turn on/off the head unit.
Press button (1) for more than 3 seconds, the button is operated to initial volume
control button. When system power turns on, the volume is set to initial volume
level.
2 MUTE button
In RADIO/AUX IN mode, press MUTE / button (2) to activate mute function and
“MUTE”will appear on the display. Press the button once again to release mute
function and return the volume to the last position before it was muted.
In CD (or CASSETTE)/CDC mode, press / MUTE button (2) to pause CD (or
CASSETTE)/CDC player. Press it again to resume play.
3 VOLUME +/- buttons
Press VOL / buttons (3) to increase/decrease volume level.
1 8 56
2 3 4 7
7
OPERATION
4 MODE SELECTION button
Press the MODE button (4) to step sequentially through the following sources:
e.g. radio mode to CD mode (or cassette mode) to CDC mode to AUX in mode.
5 BAND SELECTION button
FOR WEATHER BAND VERSION ONLY:
Press the BAND button (5) to step sequentially through the following bands: FM1,
FM2, AM, WX.
6 TRACK/SEARCH/TUNE buttons
•STATION SELECTION (FOR RADIO OPERATION)
Press /buttons (6) shortly to activate automatic seek function. Press for
more than 3 seconds until “MAN”appears on the display, the manual tuning
mode is selected. If both buttons have not pressed for several seconds, they
will return to seek tuning mode and “AUTO”appears on the display.
•STATION SELECTION (FOR WEATHER BAND OPERATION)
Press /buttons (6) shortly to select channel forward or backward. The range
of selecting forward or backward is CH1~CH7 Channels.
•CASSETTE REWIND/FORWARD (FOR CASSETTE OPERATION)
Press /buttons (6) to activate the cassette fast forward or rewind.
•SELECT TRACKS (FOR CD OR CDC OPERATION)
Press the /buttons (6) shortly to move to the following track or the previous
track.
Press the /buttons (6) for more than 3 seconds to activate fast forward or
rewind of the disc. Disc play starts from when you release the button.
7 SHIFT/SCAN button (FOR WITH CDC VERSION ONLY)
•SCAN (FOR RADIO OPERATION)
Press SHIFT/SCAN button (7) to scan through strong stations in the current
band. Radio pauses for five seconds at each strong station. At each time the
frequency is flashing on the display. Press SHIFT/SCAN button (7) again to
listen to current station.
•SELECT DISC
During CDC operation, press SHIFT/SCAN button (7) to shift mode. And then
“SHIFT”will appear on the display. At shift mode, press /buttons (6) to
select next disc or previous disc. If there is not any operation for several seconds,
it will exit shift mode automatically.
8 Liquid Crystal Display
Exhibit the number, the current disc and the current track, and other activated
functions on the display (8).
8
OPERATION
1. First insert the hooks on the base into the slots of the holder to install the base to
the holder.
2. Select the proper object, then place the remote mounting bracket on the base and
let the object go through the base and the mounting bracket.
9
INSTALLATION
INSTALLATION HARDWARE
HOLDER BASE
REMOTE
MOUNTING BRACKET
SCREW (ø4X50) NUT
X1X1X1
X2 X2
INSTALLATION DIAGRAM
10
3. Align the screw holes on the holder with the screw holes on the base and the screw
holes on the bracket, then use the two screws (ø4X50) and nuts to fix the bracket,
the base and holder to the proper location.
4. Last install the remote control to the holder. See below, align the four hooks on the
holder with the four slots on the remote control.
WIRE
INSTALLATION
Indice
Altri manuali PYLE Audio Lettore CD
