CONTROL PANEL
NOTE: This drawing is for illustration purpose only. The actual
control panel may look slightly dierent. However, the functions &
usage remain the same.
HOW TO USE
Press the master ON/OFF button.
After the ceramic cooker is powered on, press the function
button to select your preferred cooking needs. Once
selected, the cooker will start working until preset time
expired.
The Timer function works in manual and automatic
functions (Steamboat, BBQ, Fry, Water, Soup and Milk). First,
select your desired cooking needs by pressing the Function
button. Press the Timer/Pre button to trigger Timer mode.
Use the + and - buttons to adjust desired time.
These two buttons are only applicable to manual function
(Steamboat, BBQ and Fry) for adjusting heat levels. The
adjustable range for: 200-1200W/176°F-1202°F
Use the + and - buttons to adjust desired time (refer to
Timer function). This function is not applicable to automatic
settings for milk, soup and water.
MANUAL FUNCTION
PKST16/PKST18 with sensor touch control type, pre-set a
exible function design for your desired cooking needs. After
the ceramic cooker power on, press the temp/ watt button to
increase/down the power from 200-1200W/176°F-1202°F
Timer : Time and temperature are adjustable according to your
preference. The timer can be adjusted up to 240 minutes.
NOTE: This drawing is for illustration purpose only. The actual
control panel may look slightly dierent. However, the functions &
usage remain the same.
PKST14 button control type is designed for dierent cooking
function and dierence purpose.
MANUAL FUNCTION
HOT POT / BBQ / FRY
Press the function button to ignite the LED light. The display on
the screen is dierent for each function. For HOTPOT & BBQ, it will
display 1200W and P7 respectively. For FRY function, it will display
P7.
Timer : Time and temperature are adjustable according to your
preference. The timer can be adjusted up to 240 minutes.
PKST16
PKST18
PKST14
www.NutrichefKitchen.com www.NutrichefKitchen.com
