Pyle PDMW420PG Manuale utente

INSTRUCTION

MANUAL

WIRELESS SYSTEM

POWER AF PEAK

DIVERSITY

Diversity

Wireless Mic. Receiver

PLL

CONTENTS

Thank you for your kind using our wireless microphone

with receiver. Before using the machine please read

the instruction manual very carefully. According to our

instruction manual for ensure you using of the best

function and performance. lf any defect please contact

with our agent or dealer. lt is our pleasure to serve you.

Thank you for your cooperation

CHARACTER

SPECIFICATIONS

NAMES OF PARTS

INSTALLATION

POWER SUPPLY CONNECTION

SQUELCH CONTROL AND VOLUME CONTROL

UNBAL OUT AND BALANLED OUT

INDICATOR ANDINSTALL ANTENNA

NOTE

ENGLISH

KEEP AWAY RAINING OR

SUN SHINE.

BE CAREFUL, DON'T DROP

OFF THE MICROPHONE TO

FLOOR.

THE WIRELESS RECEIVER

LOCATED AT GOOD CONDITION

PLACE.

NOTE

RECEPTEUR :

40-60m

RECEPTEUR

ENGLISH

IF YOU ARE NOT TECHNICAL ENGINEER PLS. DO NOT MODI-

FIED OR KNOCK - DOWN IT.

NOTE

ENGLISH

Specifications :

Character :

antenna.

LED lndicator (Power , Diversity (A---B),Peak) and telescopic

Compact, lightweight, single-channel receiver.

780~865Mhz.

UHF band frequency by PLL synthesized oscillator. Range from

Compander circuit for expending dynamic range.

Special circuit design to delete microphone switch ON/OFF noise.

Audio output connect with XLR balanced and mono phone jack

unbalanced.

ENGLISH

Weight

Dimensions

Squelch

Audio Output

Frequency Response

S/N proportion

Sensitivity

T.H.D.

Deviation maximum

Oscillation Mode

Carrier Frequence Range

Reception mode

Stabilite

Portee de dynamique

Power Supply

600g

1.32 lb

295(W) 114(D) 40(H) mm

0.97(W) 0.37(D) 0.13(H)ft

1. Unbalanced 6.3mm phone jack 750mV/5K

2. XLR Balanced output 70mV/600

3uv pour 20dB SINAD

50Hz-15KHz 3dB

Tone Key (Tone frequency : 32.768KHz)

External Control

>100dB At 15KHz de Deviation

<1%

40/50KHz

0.005% /25 C

UHF 780~865 MHz

Diversity model

PLL synthesized oscillator

>100 dBm

DC 12V-15V 300mA

With AC/DC Adaptor

NAME OF PARTS

4. Telescopic Antenna.

3. Audio Peak Indicator.

2. Mic. ON and Diversity Signal Indicators.

1. Power ON Indicator.

ENGLISH

POWER AF PEAK

DIVERSITY

8. Squelch Control

This control is factory present,

SQ noisy controlled adjustment,

Before you turn-on the receirer,

at first. The receiver already

have been jamming by outside

signal. Please adjust SQ con-

trol until the jamming signal

has disappeared. (Clock-wise)

INSTRUCTION MANUAL

FIG.8

FIG.7

SQUELCH

MAX.

SENS.

a. Power ON lndicator:

This red light glows. When

the DC supply and power

Switch ON. It indicates that

the receiver is on.

b. Reception Indicator:

This indicator does light

during standby. When

microphone signal is

received, The green or

yellow indicator light to

indicate the reception of

microphone.

c. Audio peak Indicator:

This red light flickers when

the audio signal from the

microphone approaches

the overload clipping level.

It is affected by the tran-

smitter gain control setting

and the loudness of your

voice.

7. Indicator

POWERAFPEAK

DIVERSITY

ENGLISH

Diversity

WirelessMic. Receiver

PLL

INSTRUCTION MANUAL

6. Balance output XLR or

CANNON Connection

Cable insert to balance soc-

ket output connecting with

mixer or amplifier MIKE IN.

BALANCE

MIKE INPUT

FIG.6

5. Audio Output Connector

You can connect an unbala-

nced audio cable with a 1/4

inch phone plug between this

connector and your mixer or

amplifier input.

FIG.5

UNBAL

BALANCE

MICRO

AUX

AUDIO OUTPUT

BALANCE

MICRO

AUX

AUDIO OUTPUT

ENGLISH

NAME OF PARTS

11. Balance Socket.

10. Audio output Connector.

9. Volume. Control.

8. Squelch Control.

7. Channel selector switch.

6. DC. Jacket.

5. Power Switch.

POWER

ON OFF

DC IN

SQUELCH

MAX.

VOLUME

AUX

BALANCE

MICRO

AUX

AUDIO OUTPUT

MAX.

SENS.

1089 11

ENGLISH

13 5

15 3

4.Volume Adjustor

The purpose of this control is

to give the ability to provide

an audio outputlevel from the

wireless system that is similar

to that of a wired microphone.

3.Install Antenna.

Receivers signals from the transmitter. Make sure the antenna is

fully extended vertically.

FIG.4

INSTRUCTION MANUAL

MAX.

VOLUME

AUX

POWER

ON OFF

DC IN

SQUELCH

MAX.

VOLUME

AUX

BALANCE

MICRO

AUX

AUDIO OUTPUT

MAX.

SENS.

4545

ENGLISH

2.Power Supply Connection

Use DC power supply could

switch with adaptor supply or

batter of 12-18V DC.

Connection DC supply, DC

plug connection with "DC-IN"

socket. (see FiG2) another

plug terminal connection with

battery or power supply.

FIG.2

FIG.1

INSTRUCTION MANUAL

POWER

ON OFF

POWER

ON OFF

DC IN

ENGLISH

13 5

15 3

1.Power Switch

Mark sure the correct voltage.

push this power switch once

to turn on; If unit still fails to

operate, Secure a qualified

technician or contact us for a

Return Authorization prior to.

Shipment. Disconnect power

supply before removivg re-

ceiver cover. If you want to have

a different frequency, set the

receiver and transmitter power

SW to OFF before you do.

Indice

Manuali Sistema microfonico popolari di altre marche

Paso

Paso R824 Manuale utente

Naxa

Naxa NAM-982 Manuale utente

Motorola

Motorola PMNN4461 Manuale utente

Xvive

Xvive U3 Manuale utente

Tekon

Tekon DUOS Manuale utente

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manuale utente

Devine

Devine WMD-IE Manuale utente

LG LF-D7150 Manuale utente

GE S768DAV Manuale utente

LD U305 HBH 2 Manuale utente

Chainway

Chainway URA8 Manuale utente

ORATOR

ORATOR D860TD Manuale utente

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuale utente

Alpha Technologies

Alpha Technologies RBMS Manuale utente

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manuale utente

Shure

Shure UA844 Manuale utente

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuale utente

Airspan

Airspan AS4000 Guida