Pyle PLPTS1 Manuale utente
PLPTS1
Professional DJ Grade Laptop/Notebook Computer Rolling Stand
Construction Manual
Visit us online @
www.PyleAudio.com
Included parts:
8 x short screws
4 x long screws
4 x nuts
4 x adjustable clamps
4 x wheels
1 x I-bar
1 x T-bar
1 x main plate
1 x small plate
You will need a Phillips-head screwdriver to assemble your stand.
Constructing the PLPTS1.
1. Start by laying out the I-bar upside down, exposing a screw
hole at each corner:
2. Screw a wheel into each corner:
3. Screw the T-bar into the I-bar using the four long screws and
nuts:
4. Attach the adjustable clamps to the T-bar. Unscrew the clamp,
pop them onto the bar, and then screw the clamp back in.
5. Attach the main plate to the clamps on the longer end of the T-
bar and the small plate to the shorter end using the included short
screws.
6. You’re done! You can adjust the height of your stand using the
metal lock on the T-bar:
Altri manuali Pyle Rack e supporto
Pyle
Pyle PSTND16 Manuale utente
Pyle
Pyle PLPTS35 Manuale utente
Pyle
Pyle PMKS15 Manuale utente
Pyle
Pyle PSTND13 Manuale utente
Pyle
Pyle PMKS46 Manuale utente
Pyle
Pyle PLPTS2 Manuale utente
Pyle
Pyle PLCTND44 Manuale utente
Pyle
Pyle PTVSTNDPT3215 Manuale utente
Pyle
Pyle PLPTS26 Manuale utente
Pyle
Pyle PSPAD15 Manuale utente
Pyle
Pyle PLPTS2 Manuale utente
Pyle
Pyle PGST43 Manuale utente
Pyle
Pyle PSW772 Manuale utente
Pyle
Pyle PLCTND44 Manuale utente
Pyle
Pyle PLPTS1 Istruzioni per l’uso
Pyle
Pyle PLPTS2 Manuale utente
Pyle
Pyle PMKS32 Manuale utente
Pyle
Pyle PMKSPAD1 Manuale utente
Pyle
Pyle PTVSTNDPT3215 Manuale utente
Pyle
Pyle PLPTS38 Manuale utente
