Pyle PPHP803MU Manuale utente

USER’S MANUAL

www.pyleaudio.com

PPHP803MU PPHP103MU PPHP123MU PPHP153MU

Before using your new Speaker System Please review the

following instructions, for the safety and investment.

INSTRUCTIONS

Before connecting the speaker, make sure the system is off and the controls on the minimum level. On the

contrary the system could damage

1.Plug the power cable to the AC outlet and to the system and the speaker

2.Plug the microphone in the “MIC” input

3.Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input

4.Turn on the systems. A green LED will light up to indicate the speaker is on

5.Set the volume on the low level on the MIC and the LINE IN input

6.Increase the master volume (place on the right side of the LINE OUT *connector)

7.Set TREBLE and BASS controls to equalize the sound

8.A red LED will light up when the system detects overload power. You will must decrease the volume.

CAUTIONS

Do not place the microphone against the speaker, it can cause feedback echo and it will damage the system

EXTRA FUNCTIONS

6.3 And XLR connectors marker as LINE OUT can handle an amplifier or even another powered speaker

cabinet. On the bottom of the speaker there is a hole to place a stand.

FEATURES

-8”Woofer

-compression Driver with 1 “Titanium Diaphragm

-Full Featured 3 Channel Mixer

-XLR and 1/4”Mic Inputs

-XLR＆stereo RCA Line Input

-XLR and 1/4”Line Outputs

-Master Volume,Mic Level, Line Level

-Player MP3 USB Stick

-3.5mmAux-In Compatible With All Digital Music

-Frequency Response:45Hz-20KHz

-Power Output:300Watts RMS, 600Watts Peak

-Crossover Frequency:3.0KHz

- Integrated 35mm Speaker stand Mount

-Dimensions:11.8”WX9.8”DX17.3”H

Players,Including Iphone,with Remote control

-10”Woofer

-compression Driver with 1 “Titanium Diaphragm

-Full Featured 3 Channel Mixer

-XLR and 1/4”Mic Inputs

-XLR＆stereo RCA Line Input

- 1/4”Line Outputs

-Master Volume,Treble,and Bass Controls,

-Player MP3 From SD Card / USB Stick

-3.5mmAux-In Compatible With All Digital Music

-Frequency Response:45Hz-20KHz

-Power Output:400Watts RMS, 800Watts Peak

-Crossover Frequency:3.0KHz

-110/220 Voltage Selectable

- Integrated 35mm Speaker stand Mount

-Dimensions:14.1”WX11.4”DX21.2”H

-12”Woofer

-compression Driver with 1.34 “Titanium Diaphragm

-Full Featured 3 Channel Mixer

-XLR and 1/4”Mic Inputs

-XLR＆stereo RCA Line Input

- XLR &1/4”Line Outputs

-Master Volume,Treble,and Bass Controls,MP3

-Player MP3 From SD Card / USB Stick

-3.5mmAux-In Compatible With All Digital Music

-Frequency Response:30Hz-22KHz

-Power Output:500Watts RMS, 1000Watts Peak

-Crossover Frequency:2.2KHz

-110/220 Voltage Selectable

- Integrated 35mm Speaker stand Mount

-Dimensions:16.5”WX13.7”DX25.1”H

Control, Mic Level and Line Leve

Players,Including Iphone,

Mic Level and Line Level

Players,Including Iphone,

-15”Woofer

-compression Driver with 1.75“Titanium Diaphragm

-Full Featured 3 Channel Mixer

-XLR and 1/4”Mic Inputs

-XLR＆stereo RCA Line Input

- XLR &1/4”Line Outputs

- Master Volume,Treble,and Bass Controls,MP3

-Player MP3 From SD Card / USB Stick

-3.5mmAux-In Compatible With All Digital Music

-Frequency Response:30Hz-22KHz

-Power Output:600Watts RMS, 1200Watts Peak

-Crossover Frequency:2.2KHz

-110/220 Voltage Selectable

- Integrated 35mm Speaker stand Mount

-Dimensions:19”WX15.7”DX29.1”H

Control, Mic Level and Line Level

Players,Including Iphone,

PPHP803MU

600Watts Powered Two-WAY PA Speaker

PPHP103MU

800Watts Powered Two-WAY PA Speaker

PPHP123MU

1000Watts Powered Two-WAY PA Speaker

PPHP153MU

1200Watts Powered Two-WAY PA Speaker

with Remote control

with Remote control with Remote control

SPECIFICATIONS:

PPHP1299AI PPHP1591 PPHP1594A PPHP1599AI

Electrical safety

All products are fitted with a detachable power cord (supplied) which connects to the AC mains and the back panel of the

loudspeaker. The power cord has an IEC female connector on one end and male mains connectors on the other end. This

cord is supplied specially to accommodate the different worldwide safety and electrical code requirements. The power

cord supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding plug. Like any electrical

appliance, your EON powered speakers should not be used in water or when wet.

Product design and specifications are subject

to change without previous notice.

PPHP803MU PPHP103MU PPHP123MU PPHP153MU

Woofer

Impedance 4ohms 4ohms 4ohms 4ohms

Sensitivity 93dB/m/w 94dB/m/w 95dB/m/w 97dB/m/w

Freq.Resp 40Hz-20KHz 40Hz-20KHz 30Hz-22KHz 30Hz-22KHz

Diameter 8" 10" 12" 15"

Coil Diameter 1.5" 2" 2.5" 3"

Magnet 30oz 40oz 50oz 60oz

Tweeter

Impedance 8ohms 8ohms 8ohms 8ohms

Sensitivity 100dB/m/w 100dB/m/w 100dB/m/w 100dB/m/w

Freq.Resp 800Hz-20KHz 800Hz-20KHz 800Hz-20KHz 800Hz-20KHz

Coil Diameter 1" 1" 1.34" 1.75"

Magnet 12oz 12oz 13.5oz 23oz

Built-in Amplifier Yes Yes Yes Yes

1.Iphone input

Allows you to connect an Iphone with a 3.5mm connector.

2.Banlanced Microphone Input

Connector for a balanced microphone input .

4.RCA Line-In

Allows you to connect an externel audio device(CD, radio / DVD,etc) with RCA connectors

5 .XLR Line-In

Allows you to connect an external audio device (CD, radio / DVD,etc) with XLR connectors

6.Signal output

Use 6.35mm jack to connect amplifier or even another powered speaker cabinet in cascade

using a XLR connector

17.AC power

To connect the AC power cord

16.On/Off Power Switch

Press to power on/off the speak box

.Microphone input

Allows you to connect a microphone with a 6.3mm connector.

9.MP3/ Iphone Volume control

Set the MP3/ Iphone volume level

11.Line-In signal volume control

Use this control to set the volume level of the Line-In signal

12.Volume control

Set the volume level9

10.Mic volume control

Use this control to set the volume level of Microphone

13.Treble

Use it to set the treble level

14.Bass

Use it to set the bass level

15.

AC 110/220 Voltage Selectable

7/8. SD card /USB

PPHP803MU PPHP103MU

910

18.Fuse

Remote control

PPHP123MU PPHP153MU

1.Iphone input

Allows you to connect an Iphone with a 3.5mm connector.

2.Banlanced Microphone Input

Connector for a balanced microphone input .

4.RCA Line-In

Allows you to connect an externel audio device(CD, radio / DVD,etc) with RCA connectors

5 .XLR Line-In

Allows you to connect an external audio device (CD, radio / DVD,etc) with XLR connectors

6/7.Signal output

Use 6.35mm jack to connect amplifier or even another powered speaker cabinet in cascade

using a XLR connector

18.AC power

To connect the AC power cord

17.On/Off Power Switch

Press to power on/off the speak box

.Microphone input

Allows you to connect a microphone with a 6.3mm connector.

10.MP3/ Iphone Volume control

Set the MP3/ Iphone volume level

12.Line-In signal volume control

Use this control to set the volume level of the Line-In signal

13.Volume control

Set the volume level

11.Mic volume control

Use this control to set the volume level of Microphone

14.Treble

Use it to set the treble level

15.Bass

Use it to set the bass level

16.

AC 110/220 Voltage Selectable

8/9.

SD card /USB

Remote control

Questo manuale è adatto per i seguenti modelli

Altri manuali Pyle Sistema di altoparlanti

Manuali Sistema di altoparlanti popolari di altre marche

JVC

JVC CA-MXK5R Manuale utente

LG NB4532B Manuale utente

JVC

JVC CA-FSH100 Manuale utente

5Core

5Core Pro Series Manuale utente

EAW

EAW MQV1394e Manuale utente

Lynx

Lynx GXR-LA10A Manuale utente

iLive

iLive ITB066B Manuale utente

RDX

RDX QuickStation 4 Manuale utente

Electro-Voice

Electro-Voice S-122 Manuale utente

Sven

Sven SPS-619 GOLD Manuale utente

Pioneer

Pioneer CS-7070 Manuale utente

EAW

EAW UB82e Manuale utente

Sondpex

Sondpex Active Speaker System and Digital Music... Manuale utente

JVC

JVC NX-PN7 Manuale utente

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuale utente

Yamaha

Yamaha NX-A01 - Speaker Sys Manuale utente

SE Audiotechnik

SE Audiotechnik I-LINE Manuale utente

Gemini

Gemini WRX-843 Series Manuale utente