Pyle PL7ANDIN Manuale utente
2
ANDROID STEREO RECEIVER
Please read this manual carefully before you use the unit and save it for future reference.
Installation Precaution:
1. This unit is designed for using a 12V negative ground system only. Make sure that your vehicle is NOT on
positive ground system before installation. Connecting this unit to a positive ground system is extremely
hazardous and may result in a fire.
2. In order to avoid short circuit, disconnect the vehicle’s battery before attempting the installation.
3. Only connect the power cord after other connections have been completed.
4. Insulate all exposed wires to avoid short circuit terminal (+) of the battery.
5. Please note that the yellow wire is connected to the anode terminal (+) of the battery.
6. If a fuse replacement is required, always ensure the specifications of the fuse for both the automobile and
the unit are the same.
7. Be sure to connect the unit in exact accordance with the supplied diagram from in order to avoid
installation damage which is specifically excluded from the warranty which covers the factory defect only.
8. Grounding or incorrectly connecting the power line (yellow) may blow the unit and/or the vehicles fuse.
Basic operation--Gestures
The machine can recognize gestures divided into short press, long press, drag, slide and other types. The
results of the same function in dierent manifestations are not the same gestures, the user machine operated
by touch screen.
Main interface – Main Menu
After the default machine starts to jump to the main menu page. This page is part of the main display
arrangement shortcuts to frequently used functions, and press the space button to pop up the wallpaper
settings, the user can make adjustments to the layout of the page according to personal preference.
3
Application Interface
Click the Menu button to access to the application list screen. Machine mounted on the car all applications are
shown here, you can nd shortcuts to frequently used functions onto the page in the main menu, so easy to
operate.
App Layout - Deleting Application Icons
In the main menu, long press an app icon or widget you wanted to delete, the Delete button will pop up on
the screen. If you hold down the length of the user’s icon or widget into the Delete button, a pop-up will
appear asking if you are sure about deleting that icon or widget, click delete.
Radio – Radio Interface
Radio broadcasts can accept dierent signal, the user can add your own favorite radio channel included to
p1-p6, supports up to six radio stations included stored. This user-friendly than through search, you can
quickly listen to their favorite programs.
4
Radio – Prole of function icons
Radio – Add Stations Remark
Click the radio edit button to bring up the edit box. Click the edit cursor station information; this cannot be
empty, press the keyboard after you nish editing the done button. If you want to change the radio frequency
into FM button when nished click the Save button. Then pull to the left on the radio right page, you can pop
up a list of the information stored station.
Radio - radio edit, and delete information
Pull out the list of hidden station information, select the list that you want to modify the radio option
left drag operation button appears. Click the Edit button to open the radio message editor, where the
user can modify the frequency of the station and the name of the previously saved.
When you click the Delete button in the list, the user station information will be stored in the database
cleanup.
Frequency-plus-function
Band switching function
Local radio features
Stereo function
Quick search function
Save radio features
Save frequency function
RDS PTY
RDS FM
RDS TA
Radio Edit function
Radio Setting Function
5
Radio- Save Radio
Radio Total points ve bands, each band can store 6 stations for information. Users simply press the
p1-p6 either a button, you can save the current frequency band under the button. You can also click on
the Save button, rst click on the address you want to save then FM, after that click the Save button.
Radio-Band Switch
Click the button to switch the band, the radio band in the FM1, FM2, FM3, AM1 and AM2 cycle
between the switch and save the current six-band radio information button will follow the change.
As a result of inconsistent regional broadcasting band, the user can manually switch according to
local conditions.
Radio-Band Switch
Radio- Radio Search
Click the search button automatic station to search operation. After the button is pressed, the radio
station will search out all the bands.
Press upward search, press frequency was reduced.
Press downward search, press frequency was added.
6
Radio - Radio settings
Click the radio button set to enter the setting interface. In the radio setup interface, there are AM and
FM sensitivity adjustment, of course, the premise is under the automatic stoppage. RDS switch and
Radio Area for your selection.
Radio -a key to restore
After setting the radio interface to set up AM, FM sensitivity, or RDS switch or area change, if you nd it very
messy and not conducive to our conditioning radio, we can click a Restore button to restore the default
settings.
7
Car Settings- Sound Settings
In the sound Setting screen, you can equalize, amplify switching output sound eects and other
options on the machine setting, users can experience the eect of the actual operation.
Car Settings- General Settings
In General Setting, you can set up some basic properties of the machine, the user can congure the
function according to personal habits.
Car Settings- General Settings
1. Any key to booth: click on any button to power on the touch screen
2. Brake settings: video displayed by the handbrake state control
3. Automatically enter the navigation: boot automatically into the navigation function
4. Reversing Mirror: Reverse mirror image to display
5. Reversing Silent: block reversing other sound output
6. Default volume switch: control power-on default volume setting is valid
7. The power-on default volume: set the default boot volume value
8. GPS mixing: control navigation message tone background sound output
9. The mixing ratio: control the size of the navigation message tone background sound
10. Reversing sound reduction: reversing the background sound volume control
11. Navigation Application: navigation map set called
12. The position of driver’s door: according to actual conditions, set driving position
8
Car Setting- GPS information
GPS positioning information display basic information about the machine also supports Beidou and
GPS dual display module. Auto Sync switch can control the car engine positioning, machine time is
synchronized with positioning of the satellite time.
Car settings-Factory Settings (Password:3368)
Factory settings can be congured for machine functions into the need to enter the correct password
pair, to ensure the normal operation of the machine non-special circumstances; we do not recom
mend users to change the settings.
Bluetooth - Bluetooth phone pad
Bluetooth phone and car machine needs to use the Bluetooth phone function when connected.
1. Respectively, open the phone, Bluetooth car machine device and use the phone visible to everyone.
2. Search for Bluetooth devices in the phone, then nd selected for the connection, then you want to enter a
pass code, generally: 0000 enter the pairing can show a successful connection.
9
Bluetooth- Bluetooth button control
Bluetooth- Set interface (Bluetooth Name: Pyle USA Password:0000)
Bluetooth settings page displays the name of the car as well as the local Bluetooth pairing password, the user
can manually change the information, automatic answer function is when there is an incoming call, the car
will automatically answer. Bluetooth reset button can press all the information set by the user will return to
the factory settings.
10
Bluetooth- synchronize your phone contacts
On synchronized phone contacts, rst ensure that the phone and the Bluetooth car machine is connected,
the following is a method of synchronizing:
1. Click on the button to download the phone book, on the phone, allow pop-up prompt box and select to
access the phone o the car contacts.
2. Wait for the car’s notication that download is completed and then click the Save button.
Bluetooth- Call records
All phone calls during a Bluetooth connection with the car engine which will be recorded in this page is
displayed, according to the arrangement by the time dial down recently and according to incoming,
outgoing, missed calls are Pyle classified display.
Contact look up function
Download phone book function
Save Phone book
Clear phone book function
Call function
Call Log Outgoing records Missed calls record Delete all records Call function
Indice
Altri manuali Pyle Ricevitore stereo
Pyle
Pyle PVTA20 Manuale utente
Pyle
Pyle PLMR15BW Manuale utente
Pyle
Pyle PLCD43BTM Manuale utente
Pyle
Pyle PT390AU Manuale utente
Pyle
Pyle PT390BTU Manuale utente
Pyle
Pyle PT380AU Manuale utente
Pyle
Pyle PT560AU Manuale utente
Pyle
Pyle PT590AU Manuale utente
Pyle
Pyle PT390BTU Manuale utente
Pyle
Pyle PVTA80 Manuale utente
Manuali Ricevitore stereo popolari di altre marche
Pioneer
Pioneer SX-1000TA Manuale utente
Yamaha
Yamaha MusicCast TSR-5B3D Manuale utente
Sony
Sony STR-DE335 - Fm Stereo/fm-am Receiver Manuale utente
Sony
Sony STR-DG500 - Multi Channel Av Receiver Manuale utente
Panasonic
Panasonic AJSD955B - DVCPRO50 STUDIO DECK Manuale utente
Pioneer
Pioneer SX-838 Manuale utente