Pyle PLTVCP85 Manuale utente
VIDEO CASSETTE RECORDER
WITH BUILT-IN TV TUNER
PLTVCP85
CAUTIONS AND WARNINGS
To obtain the best results and to avoid malfunctions, PLEASE READ CAREFULLY
THE DESCRIPTIONS AND OPERATING PROCEDURES CONTAINED IN THIS
OWNER'S MANUAL PRIOR TO OPERATING
THE VIDEO CASSETTE RECORDER.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
Indicates a warning or notice regarding product operation.
Indicates the presence of important operating and
maintenance (servicing) instructions.
RISK OF ELECTRIC SHOCKS
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
AVERTISSEMENT
POUR PREVENIR LES RISQUES D'INCENDIE ET D'ELECTROCUTION, NE PAS
EXPOSER CET APPAREIL A LA PLUIE NI A L'HUMIDITE.
This user manual employs the following symbols to indicate different types of warning
messages.
Indicates the presence of uninsulated dangerous
voltage within the unit enclosure.
'
''
''
1
2
1. Read Instructions-All the safety and operating instructions should be read before the Video
Cassette Recorder is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Cautions and Warnings-All cautions and warnings regarding the Video Cassette Recorder
should be adhered to.
4. Follow Instructions-All operating instructions should be followed.
5. Cleaning-Unplug or turn off vehicle power to the Video Cassette Recorder before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning.
6. Attachments-Do not use attachments not recommended as they may cause hazards.
7. Water and Moisture-Do not use this video product near water, for example, near a bath tub,
kitchen sink, near a swimming pool or other wet locations.
8. Accessories-Do not place the Video Cassette Recorder on an unstable cart, stand, tripod, bracket,
or table. The Video Cassette Recordermay fall, causing serious injury to a child or adult,
and serious damage to the Video Cassette Recorder. Use only with a cart,stand, tripod, bracket,
or table recommended . When used in vehicles, the Video Cassette Recorder must be securely fastened.
9. Ventilation-Slots and openings in the cabinet are provided for ventilation to ensure reliable operation
of the Video Cassette Recorder and to protect it from overheating. These openings must not be
blocked or covered. The openings should never beblocked by placing the Video Cassette Recorder
on a bed, sofa, rug, or other similar surface. The Video Cassette Recorder should never be placed
near or over a radiator or heat register. This video product should not be placed in a built-in installation
such as a book case or rack unless proper ventilation is provided.
10. Power Sources-The Video Cassette Recorder should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power supply ,
consult your appliance dealer or local power company. For video products intended to operate from
battery power or other sources, refer to the operating instructions.
11. Do not attempt to service the set yourself as opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
SAFETY INSTRUCTIONS
3
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interfere nice to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
CAUTIONS AND WARNINGS
SAFETY INSTRUCTIONS
TABLE OF CONTENTS
FEATURES
ACCESSORIES
INSTALLATION WITH MOUNTING BRACKETS
FRONT PANEL-CONTROLS AND INDICATORS
REAR PANEL-CONNECTIONS AND POWER
REMOTE CONTROLLER
SETTING THE MENU
OPERATING TV TUNER
VIDEO HEAD CLEANING
ERASURE PROTECTION
TROUBLE SHOOTING
SPECIFICATIONS
1
2
3
4
4
5
6
8
10
11
13
14
14
15
17
TABLE OF CONTENTS
4
BUILT-IN TV TUNER (TV/CATV)
HI-FI STEREO SYSTEM
BACK LIGHTING OF FUNCTION BUTTONS
ON SCREEN DISPLAY (English)
EXTERNAL IR REMOTE CONTROLLER WITH RECEIVER
DEW & HEAT SENSORS FOR TAPE PROTECTION
NTSC COLOR SYSTEM
TWO AUDIO/VIDEO INPUTS
ENCORE FUNCTION
- Press ENCORE key on the remote controller to watch the desired picture once during playback.
AUTO REPEAT PLAY
- This function can be turned on/off from "menu".
DIGITAL AUTO TRACKING
- This VCR plays clear pictures without special operations.
AUTO START FUNCTION
- This VCR will automatically power on and into PLAYBACK mode when a cassette is inserted.
DC POWER SUPPLY (2 KINDS OF DC 12V INPUTS)
FEATURES
VCR UNIT
INSTRUCTION MANUAL
POWER CABLE
REMOTE CONTROLLER AND BATTERY
REMOTE IR SENSOR CABLE (5M)
CONVERT-ADAPTER
MOUNTING BRACKET AND SCREW
ACCESSORIES
5
INSTALLATION WITH MOUNTING BRACKETS
Use the short screw for the joint of the VCR and bracket.
Use the long screw for installation of this VCR to your vehicle or any
other place.
The VCR can be mounted vertically , horizontally or at any angle in between with the
supplied mounting brackets. The VCR cannot be mounted upside down or on its side.
VCR is sensitive to dirt and other contaminants. Do not mount the unit in direct sunlight
or where fluids are likely to spill on or in the unit.
The VCR is for 12Volt negative ground vehicles only.
6
2 3 4 5 9
67810 11 12
13
2. Power Key
3. Cassette-In Lamp
When power is supplied to the set, the power indicator lamp will always light up in red.
The Power ON and Power OFF mode will be toggled by pressing this key.
When the POWER is switched on, the power lamp will light up in red the other keys will
light up in green.
When the cassette is inserted, the CST-IN lamp will light up in green.
The power is on automatically when the cassette is inserted even if the power was
off. When the cassette is inserted, Auto Tracking Adjustment operates automatically.
Hi-Fi
DEW
/HEAT
REC
1
4. Eject Key
Press this button to eject tape.
5. Stop Key
Press this button to stop tape.
FRONT PANEL-CONTROLS AND INDICATORS
If this key is pressed in the PLAYBACK mode, the VCR enters the reverse picture
search mode, and "REW" indicator lamp will be blinked.
If pressed in STOP mode, then the tape will rewind at high speed,
the indicator lamp will up in red.
6. Rewind / Review Key
1. Cassette Compartment
7
8. Fast Forward / Cue Key
9. REC Key
Press the REC key for at least one second to start recording.
10. DEW/HEAT Lamp
When power is on, this indicator flashes red to indicate excessive moisture buildup inside
the VCR.
The unit will not operate unit it dries out sufficiently ( the tape can be ejected from the unit).
When DEW mode has been activated, leave the unit on the allow it to dry out completely.
11. Hi-Fi Lamp
In the Hi-Fi out mode, the lamp will light up in red.
12. Auto Repeat Lamp
During Auto repeat operation, Auto Repeat lamp will light up in red.
13. Audio/Video In Jacks (AV2)
Connect these jacks to the audio/video out jacks terminal of your game machine or
camcorder using the RCA cord.
For displaying this Front A/V lnput connected, Input Signal should be set to " AV2" in
Menu setting mode.
If this key is pressed in the PLAYBACK mode, the VCR enters the forward picture search
mode, and "FF" indicator lamp will be blinked.
If pressed in STOP mode, then the tape will fast forward at high speed,
the indicator lamp will up in red.
7. Play / Re-AutoTracking
Press this key to playback a recorded tape, or to release special operation such as the
search mode.
In the playback mode the playback indicator lamp will be light in red, and Auto
Tracking mode, this indicator lamp will blink.
When the playback picture is noisy, press this key to operates Re-Auto Tracking.
8
1. AUDIO/VIDEO IN (AV1)
Connector this terminal to VIDEO/AUDIO OUT terminal of your Game machine,
Camcorder, Portable DVD Player, using the RCA cord
For displaying this Rear A/V input connected, Input Signal should be set to "AV1"
in Menu setting mode.
12 3 4 5
6
7
REAR PANEL-CONNECTIONS AND POWER
2. AUDIO/VIDEO OUT
Connect this terminal to VIDEO/ AUDIO IN terminal of your TV (or Amplifier/Monitor),
using the RCA cord provided.
3. IR INPUT
Connect this terminal to Remote IR Sensor cable provided.
9
5. DC 12V IN JACK ( Round type)
To use this connector, below Convert-Adapter accessory should be locked into
above connector 4.
Connect the TV antenna (or cable if available- home use) to this connector.
7. RF OUT
This connectors provides an interface to the antenna input connectors terminal of your
television using a coaxial cable.
Set TV to channel 3 or 4 to watch video tapes.
( Convert-Adapter)
6. ANT IN (TV/CATV)
* Please note : We highly recommend to connect the unit corresponding to the 3-wire
system of 4.
Thus, to make sure a proper working of power-off tape guide. Beyond it,
the unit will automatically change to standby mode after turning off the
vehicle in order to save the car battery.
4. DC 12V IN JACK (Locking type)
For car using, we recommend to use this connecter with 3-wire system.
* Connector description for 4
GND
ACC 12V
VEHICLE BATTERY 12V
Indice
Altri manuali Pyle Sistema VCR
