Pyronix Enforcer X Series Manuale utente
ENFORCER X
USER GUIDE
Document SAP:102032020-01
2ENFORCER X USER GUIDE
CONTENTS
HomeControl2.0 4
Arming Devices 5
Wired Keypads 5
Keypad keys 5
Keypad LEDs 5
Wireless Keyfobs 5
Locking the keyfob 5
Arming the System 6
Arming a multi-area system at a Keypad 6
Arming all areas 6
Arming individual areas 6
Arming a Single Area System at a Keypad 7
Using the Wireless Keyfob 8
Disarming the System 9
Disarming a Multi-Area System at a Keypad 9
Disarming a Single Area System at a Keypad 10
Using the Wireless Keyfob 10
Disarming After an Alarm 11
Using a PIN Code or Proximity Tag 11
Using the Wireless Keyfob 11
Fault Indications & Unable to Arm 12
Fault Indications 12
Control panel 12
Unable to Arm 12
Control panel indication 12
Advanced Functions 13
Chime 13
Omitting Zones 13
Keypad PA 13
Master Manager Mode Overview 14
Entering Master Manager Mode 15
Exiting Master Manager Mode 15
Master Manager Mode Options 15
Omit Zones 15
Operate User Outputs 15
Date & Time 16
Learn User Codes Keyfobs & Tags 16
Area arm choice 17
Adding a new user (code or proximity tag) 17
Adding a new user (keyfob) 18
Deleting or changing a user 18
Change Master Manager code 19
Review Logs 19
Wifi-Setup 20
Setup with WPS 20
Wi-Fi SSID 20
Wi-Fi password 21
Wi-Fi signal value 21
SMS Phonebook 21
Voice Phonebook 21
HomeControl2.0 Smart Device App 22
Getting Started 22
Adding a system via QR code 22
Adding a system via short code 23
4ENFORCER X USER GUIDE
HOMECONTROL2.0
Simple and intuitive to use
Constantly evolving
Detailed history of events
Biometric login
(FaceID/Touch ID (iOS) and Android equivalents)
Geofence alerts for easy reminders
Smart plug control
Voice push notifications
https://bit.ly/2Pi2GZN
Scan the QR code to find out more and to download HomeControl2.0
Extending the capabilities of security control
5
ENFORCER X USER GUIDE
ARMING DEVICES
WIRED KEYPADS
Keypad keys
a= Exits to day mode from main menu and selects level A when arming.
b= Moves backwards in menus and selects level B when arming.
c= Enables chime, displays additional information in the event log, and
selects level C when arming.
d= Moves forward in the log, scrolls between options, enables code entry
to master or user menus and selects level D when arming.
fp= Not used unless specifically enabled by installation company.
[]= Directional buttons and enables/disables functions.
f= Enters menus and accepts programming preferences.
h= Cancels items, resets the panel and moves to next item in a menu item.
Keypad LEDs
Alert LED
Indicates there is
information waiting to
be read.
Alarm LED
Shows alarm
activations.
Tamper LED
Shows tamper
activations.
Fault LED
Shows system faults.
Disarmed LED
Shows system is
disarmed.
Proximity tag LED
Present tag here to
arm/disarm system.
WIRELESS KEYFOBS
The wireless keyfob has four buttons that may be programmed for specific purposes, these options are programmed in the
‘LEARN USER CODES KEYFOBS & TAGS?’ section.
Locking the keyfob
All four buttons on the keyfob may be locked so that any accidental presses will not affect your wireless alarm system. For
example, this protects the buttons from being pressed accidentally if a keyfob is in someone’s pocket.
OR OR
5 seconds 5 seconds
Enforcer X
Time 10:09 c
Extending the capabilities of security control
6ENFORCER X USER GUIDE
ARMING THE SYSTEM
Example set-up
This example will be used to refer to throughout this section to further explain the arming procedure.
• User 001 has access to areas 01, 02, 03 and 04.
• User 002 has access to areas 01 and 02.
• User 003 has access to area 01.
A B C D
Zone 01
Zone 02
Zone 03
Zone 04
Zone 05
Zone 06
Zone 07
Zone 08
Zone 09
Zone 10
Zone 11
Zone 12
AREA 01
A B C D
Zone 13
Zone 14
Zone 15
Zone 16
Zone 17
Zone 18
Zone 19
Zone 20
Zone 21
Zone 22
Zone 23
Zone 24
AREA 02
A B C D
Zone 25
Zone 26
Zone 27
Zone 28
Zone 29
Zone 30
Zone 31
Zone 32
Zone 33
Zone 34
Zone 35
Zone 36
AREA 03
A B C D
Zone 37
Zone 38
Zone 39
Zone 40
Zone 41
Zone 42
Zone 43
Zone 44
Zone 45
Zone 46
Zone 47
Zone 48
AREA 04
AREAS
LEVELS
ZONES
etc.
etc.
etc.
ARMING A MULTIAREA SYSTEM AT A KEYPAD
Arming all areas
Enter a valid PIN code or present a valid tag to the symbol. Enter Your Code
[******]
To arm all areas level A, press f.Arm All Areas?
The keypad will now display the exit timer, leave the building via the
agreed exit route and make sure the exit door is closed properly. Arming [028]
Area 02
Arming individual areas
Please note: If the keypad is left without a button press for 10 seconds, the display will return to day mode.
Enter a valid PIN code or present a valid tag to the symbol. Enter Your Code
[******]
Press hto arm individual area(s) and level(s). Arm All Areas?
Press fto arm individual area(s) and level(s). Arm Individual
Areas?
Using the numerical keys, enter the number of the area that is to be
armed or press b/d to scroll through the areas accessible
to that user.
Arm [01] [ABCD]
Area 01
7
ENFORCER X USER GUIDE
Once the area to be armed is on the display, use a, b, c
or dto select the level. Once selected, press f.
Example referral
If Area 02 level B was selected, the following zones will arm:
• Zones 16-18
If Area 03 level D was selected, the following zones will arm:
• Zones 34-36
Arm [02] [*B**]
Level B
Arm [03] [***D]
Level D
The keypad will now display ‘Arm Another Area?’. Press fto
arm another area or hto start the exit timer. Arm Another
Area?
The keypad will now display the exit timer, leave the building via the
agreed exit route and make sure the exit door is closed properly. Arming [028]
Area 02
ARMING A SINGLE AREA SYSTEM AT A KEYPAD
Enter a valid PIN code or present a valid tag to the symbol. Enter Your Code
[******]
Using a, b, cor d, enter the level that is to be armed
then press f.Arm [01] [A***]
Level A
The keypad will now display the exit timer, leave the building via the
agreed exit route and make sure the exit door is closed properly. Arming [028]
Area 01
8ENFORCER X USER GUIDE
USING A PROXIMITY TAG AT A READER
Present a proximity tag to the reader and the system will begin the exit time immediately.
Please note: The system will arm depending on a combination of permissions programmed to the
reader and the access the user has. Speak to the installation company for more details.
USING THE WIRELESS KEYFOB
To arm via a keyfob. Pressand hold for less than 2 seconds.
The keyfob LED will start to flash green indicating that the system is starting to
arm.
‘Please wait arming wireless’ will be displayed on the keypad and the
programmed area will begin to arm.
To ‘quick arm’, press and hold thekey again for four seconds.
Once armed, the keyfob LED will illuminate RED indicating that the system is
now armed.
<2 seconds
9
ENFORCER X USER GUIDE
DISARMING THE SYSTEM
DISARMING A MULTIAREA SYSTEM AT A KEYPAD
Enter the building, the ‘entry time’ will start. ENTRY TIME [30]
Enter a valid PIN code or present a valid tag to the symbol as
shown. Enter Your Code
[******]
Press h.
Please note: This option will only appear if there are more areas
that can be armed.
Arm All Areas?
Level [A ]
Press h.
Please note: This option will only appear if there are more areas
that can be armed.
Arm Individual
Areas?
To disarm all the areas, press f. To disarm individual areas press
h.Disarm All
Areas?
To disarm an individual area, press f.Disarm Individ.
Areas?
Enter the number of the area that is to be disarmed, and press f.Disarm Area [01]
Area 01
The keypad will now display ‘Disarm Another Area?’. Press f
to disarm another area or hto disarm the selected areas. Disarm Another
Area?
If all areas are disarmed, the keypad will return to day mode.
If there are still armed areas, these will now be displayed on the
keypad LCD. Press hto return to day mode.
Armed
Area 02
Please note: If ‘disarm choice’ is disabled then the system will automatically disarm the areas armed once a valid
user code or tag is presented.
10 ENFORCER X USER GUIDE
DISARMING A SINGLE AREA SYSTEM AT A KEYPAD
Enter the building, the ‘entry time’ will start. ENTRY TIME [30]
Enter a valid PIN code or present a valid tag to the symbol as
shown. Enter Your Code
[******]
The keypad will return to day mode. Alarm Panel
Time 10:09 c
USING THE WIRELESS KEYFOB
To disarm via a keyfob. Press .
The keyfob LED will flash green indicating that the system has disarmed.
Please note: Disarming with a keyfob will only be allowed if your
installation company has enabled this.
<2 seconds
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Pyronix Pannello di controllo
Pyronix
Pyronix STERLING 10 Manuale utente
Pyronix
Pyronix PCX 46 APP Manuale utente
Pyronix
Pyronix ATLAS8PLUS Guida alla manutenzione e all'assistenza
Pyronix
Pyronix Matrix Series Manuale utente
Pyronix
Pyronix Atlas LCD Manuale utente
Pyronix
Pyronix Conqueror Manuale utente
Pyronix
Pyronix MATRIX 6 Manuale utente
Pyronix
Pyronix PCX 46 APP Manuale di installazione e funzionamento
Pyronix
Pyronix OCTAGON II Manuale utente
Pyronix
Pyronix Castle EURO 46 Series Manuale del proprietario
Pyronix
Pyronix Castle EURO 46S Manuale di installazione e funzionamento
Pyronix
Pyronix Matrix 6/816 Manuale utente
Pyronix
Pyronix Enforcer 32WE Manuale utente
Pyronix
Pyronix STERLING 10 Manuale utente
Pyronix
Pyronix Matrix 424 Manuale utente
Pyronix
Pyronix MATRIX 6 Manuale utente
Pyronix
Pyronix Matrix 832 Manuale utente
Pyronix
Pyronix STERLING 10 Manuale utente
Pyronix
Pyronix Conqueror Manuale utente
Pyronix
Pyronix EURO 46 APP Manuale utente
