Pyxis LS-200 Guida alla risoluzione dei problemi

1

LS-200 Quick Start-up Guide

Tools Need for Installation

Mobile phone with IOS or Android (not included)

Power Cable (Included)

LS-200 Wiring

Follow the wiring table below to connect the LS-202 sensor’s 4-20mA output to a controller and power

supply.

LS-200 Indicator

The indicators on the top of the sensor (figure 3) are used to indicate power status and Bluetooth

connection status.

LED Status

ON

OFF

Green Led

Power Supply is on

Power Supply is off

Blue Led

Bluetooth is connected

Bluetooth is disconnected

2

Set up using uPyxis Mobile App

Download uPyxis Mobile App from Apple App Store or Google Play.

3

Connecting to uPyxis Mobile App

Turn on Bluetooth on your mobile phone (Do not pair the phone Bluetooth to the LS-200). Open uPyxis

Mobile App. Once the app is open the app will start to search for the sensor. When the uPyxis App

connects to the sensor then press on the LS-200 Sensor Picture.

When connected, Mobile App will default to the Overview screen. Second figure below reference

parameters for tank. To enter the setting press on Setting tab.

4

In the Setting screen, you can set the Level Sensor Settings by renaming the Device Name. The

Sampling Mode can be changed to your preference. To configure the tank, enter the settings by

pressing on Tank Volume,Installation Height,Max Level, and Display Units.Note: Max Level Height

must be 4 inches less then Installation Height. To save the settings, press Apply Settings.

To save the setting, press on Set Device. The LS-200 also has password protect capabilities. To

password protect the setting on Password, press on Set.After press Set, the screen will change over to

the Set Password screen. Before setting a new password, contact Pyxis Service Department and give

them the code at the bottom of the screen. The service representative will provide you with a

password. Enter the password that was giving in the Original Password box. Then enter the New

Password, Confirm Password, and press Set Password.

5

To verify your readings after setting your parameters click on Reading.

For more information on the Installation Process reference LS-200 Operation Manual.

Altri manuali per LS-200

2

Indice

Altri manuali Pyxis Accessori

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente