Q-See QH50DVR8C Manuale utente

Part 1- Package contents:

Part 2A – Connect the DVR to QOCDC cameras Part 2B – Connect the DVR to QPSCDNV cameras

Part 2C – Connect the DVR to QS2350C cameras Part 3 – Connecting the DVR to your TV

Part 4 – DVR Controls: Front Panel

Part 5 – Accessing the DVR menus

To access the settings on the DVR push the Menu button on the front of the DVR or on the remote. This will display the screen in Pic 5.1.

Use the keypad on the DVR or remote to enter the User name and password. The default user is admin and the default password is 12345.

This will bring up the screen in Pic 5.2 where you can access the DVR’s functions. You can use the Direction keys to move the cursor (white

box in Pic 5.2) and the ENTER button to select the option you want.

Pic 5.1 Pic 5.2

Part 6 – Setting up DVR to record

There are 3 modes for recording:

1. Manual Recording:

Push the RECORD button. Enter name and password (default is admin and 12345) as in Part 5. This will display the screen in Pic 6.1. In

Start/Stop heading use Arrow keys & ENTER button to put check marks in all cameras you want to record, or you can select Start All option

(green box) to record on all cameras. After you press the ENTER button the screen will return to camera preview screen and the record line

(REC) line on the bottom of the screen will be pink for all cameras selected (Pic 6.2).

Pic 6.1 Pic 6.2

2. Motion Detection Recording:

Follow instructions in part 5 to go to main menu. Go to IMAGE option (red square in Pic 6.3) and hit ENTER, This will display the screen in

Pic 6.4. Select the camera (red square), Go down to MOTION DET LEVEL (green square), set it to 2 or 3 (normal), Go to AREA (blue square),

hit ENTER and push PTZ button to select the entire area and push ENTER to exit. Next go to COPY (yellow square) to copy to all cameras and

click CONFIRM (pink square). You have to go back to each camera to setup the AREA for each camera. Then return to Main Menu.

Pic 6.3 Pic 6.4

Now go to RECORDING (green square in Pic 6.3) and hit ENTER, this will bring up the screen in Pic 6.5. Go down to ENABLE REC (green

square) and use the ENTER key to put a CHECK mark in it. Go to SCHEDULE (orange square) and hit ENTER. This will display the screen in

Pic 6.6. Select a day (orange square) and then Select ALL DAY (red square). REC TYPE select MOT. DET. (green square). COPY to all days

(blue square), select CONFIRM (yellow square) and hit ENTER.

Restart the DVR. When it records on Motion, the light at the bottom REC line will be Blue for selected cameras (red square on Pic 6.7).

Pic 6.5 Pic 6.6 Pic 6.7

3. Time Schedule Recording.

Follow instructions in part 5 to go to main menu. Now go to RECORDING (green square in Pic 6.3) and hit ENTER, this will bring up the screen

in Pic 6.8. Go down to ENABLE REC (green square) and use the ENTER key to put a CHECK mark in it. Go to SCHEDULE (orange square)

and hit ENTER. This will display the screen in Pic 6.9. Select a day (orange square) and then Select ALL DAY (red square). Set record type to

All Time (green square). Set the Schedule start and End time for each day (yellow square). COPY to all days (blue square), select CONFIRM

(pink square) and hit ENTER. When the schedule starts recording the REC line will be green (red square in Pic 6.10)

Pic 6.8 Pic 6.9 Pic 6.10

Part 7 – Setting up the DVR to Playback

To play back recordings push the Play button to enter Playback Mode. System will request user name and password (default is admin and

12345) Then display the Play Back screen in Pic 7.1. Select the camera you want to view files from (red square). Click on Search button to

display files (green square). Select the file you want to play (blue square), push the ENTER button and the file will play. When the playback

starts the screen in Pic 7.2 will be displayed. The bar at the bottom of the screen shows you how far into the file you are as a percentage (red

square), what speed you are playing back (yellow square), how far you are into the file in minutes/seconds and how long the file is in

minutes/seconds (green square). You can adjust the playback speed using the up and down arrows on the front panel or remote. Push on

ESC button to return to list.

NOTE: Recording will not be interrupted while you are in Playback mode.

Pic 7.1 Pic 7.2

Notice: To Play Back the backup files, you need to install the FILE PLAYER program onto your PC. This program comes on the

installation CD. You will need to connect your USB backup device to your PC then run the File Player to play back the files.

If you have questions:

Mailing Address: Customer Service:

DPS Inc. Phone: 877-998- 440 x 5 8

8015 E. Crystal Dr Email: cs@dpsi-usa.com

Anaheim, CA 92807

Website: Tech Support:

http://www.q-see.com Phone: 877-998- 440 x 5 9

Fax: Email: ts@dpsi-usa.com

714-998- 509

Rev 120407

Part 8

–

Setting up

the

DVR to Backup Files

This DVR has a USB port you can use to back up to a

USB DVD/CD-RW drive, USB Hard Drive, or USB flash drive.

To back up to USB DVD/CD-RW, USB HDD, or USB Flash Drive :

Go to the Play Back screen and select the camera and files

you want using the instructions in Part 7.

Push the EDIT button and it will put a check mark on the file

(yellow square). Do this for all of the files you want to back up.

Under the SaveDevice select USB CDRW/DVDRW, USB HD, or

USB Disk (orange square)

Click on Copy option (pink square).

Indice

Altri manuali Q-See Sistema di sicurezza

Q-See

Q-See QR4074-426 Manuale utente

Q-See

Q-See QS218-411 Manuale utente

Q-See

Q-See QS458-811-5 Manuale utente

Q-See

Q-See QC9416-16V2 Manuale utente

Q-See

Q-See QR208--811 Manuale utente

Q-See

Q-See QC40196-833 Manuale utente

Q-See

Q-See QC5416 Manuale utente

Q-See

Q-See QR424-403 Manuale utente

Q-See

Q-See QR4174-411 Manuale utente

Q-See

Q-See QC804-261-1 NVR Manuale utente

Q-See

Q-See QSD2304C4-250 Manuale utente

Q-See

Q-See WR414-411 Manuale utente

Q-See

Q-See Presidio Series Manuale utente

Q-See

Q-See QT4760-16A6-5 Manuale utente

Q-See

Q-See QD113P Manuale utente

Q-See

Q-See QSDL503AD Manuale utente

Q-See

Q-See QC444-403 Manuale utente

Q-See

Q-See QR4274-418 Manuale utente

Q-See

Q-See Premium QC308-8E4 Manuale utente

Q-See

Q-See Premium QC5416-16E3-1 Manuale utente

Q-See

Q-See QC40108-818 Manuale utente

Q-See

Q-See Home Security System Manuale utente

Q-See

Q-See QR4074-411 Manuale utente

Q-See

Q-See QT548-841-5 Istruzioni operative e di sicurezza

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente