Qcam QSD-481 Manuale utente

Qcam QSD-481 Quick Start Guide

Version 1.1.1

Revised December 23th, 2015

Overview

Congratulations on your purchase of the Qcam QSD-481 intelligent security camcorder!

The Qcam QSD-481 is an intelligent security camcorder with multiple triggering methods and multi auto

on/off modes. The camcorder comes with a built-in rechargeable battery which can record up to 8 hours

of continuous video during typical use and standby for more than 3 months when vibration triggering is

enabled. By plugging in the 5V DC adapter, the QSD-481 can achieve 192 hours of looped recording for

surveillance use.*

*Actual life and performance may vary depending upon usage and settings; battery not replaceable.

Features

Circular recording –Also known as “loop recording”. Overwrites the oldest recordings first once memory

card is full so that recording can continue.

Time stamp –Inserts a time stamp onto the video.

Vibration-trigger recording –Select this to record only when vibration is detected.

Motion-trigger recording –Select this to record only when motion is detected.

Voice-trigger recording –Select this to record only when voice/talk is detected.

Auto on/off mode –Select different auto on/off scenarios.

Selectable day/night mode –Select day mode or night mode to suit your environment.

Auto gapless split file –Splits files without gaps at every 10 / 15 / 30 minutes of recording.

Orientation –Use when the camcorder is turned upside-down to correct the cameras recording

orientation.

Selectable resolution –Select a resolution of 640x480(VGA) or 320x240(QVGA) video and sound.

Frame rate adjustment –Adjust or lower the frame rate to save memory space. Lower will make the

image less smooth but allow more recording time. Higher will create a smoother image however will use

more space.

Configurable video quality –high / medium / low

Support max 64GB microSD (TF) card (for better performance, use a card with class 4 or above and

format the card before usage. Check the following link for more information: qcam.com/qsdsupport

Minimum System Requirements

Windows 2000, XP, Vista, 7, 8, Mac OS X (mass storage class) Windows Media Player 9

Intel Pentium class computer

USB 2.0 port for hi-speed transfers and charging

Package Contents

Please unpack your intelligent security camcorder and check that the following were included:

Qcam QSD-481 intelligent security camcorder

5V DC Adapter

5V Car Adapter

USB 2.0 Cable

Quick Start Guide

NOTE: For video tutorials on your Spy Cam DVR and its widget please visit:

qcam.com/qsdsupport

Charging

The camcorder comes with an internal rechargeable battery. When using the camcorder for the

first time, or if you are using it after a long period of non-usage, remember to fully charge the

battery for at least 4 hours and resync the time by using the widget (see section “PC Software

Widget”). You can charge your camcorder using the USB port of your computer, the DC adapter,

or using a car adapter.

To charge the battery through a USB port, connect the USB cable to the USB port of the

computer and the camera. For details, please see the status below. The camera will function as

a mass storage device. You will not be able to record video during this time.

To charge the battery through a DC adapter or car adapter, connect the DC adapter or car

adapter to the camcorder. For details, please see the Status section below. Moreover, you will

also be able to record video while charging, depending on themode you set.

Recording

The power button is located on the right side of the camcorder. It can turn the camcorder on or

off.

Start Recording

Press and hold the Power button until the green LED is on (approximately 2 seconds), and then

release the button. When you see the green LED flashing, the camcorder is recording. If you see

otherwise, please read the Status section below.

Stop Recording

Press and hold the Power button until the green LED is off (for approximately 2 seconds).

WARNING: Turn off the camcorder before removing the card!

Status

Without DC adapter

Green LED on: camcorder is booted up

Red LED on: no card, card failed, battery low, or card is full. Note: The Status light will not turn red

to indicate that the card is full while in not in circular recording. If the light turns red while in

circular Recording, it is because of another listed reason.

Green LED flashing: normal recording

Green / Red LED intermittent flashing: battery low andrecording

DC adapter plugged in

Red LED flashing: charging

Red LED on: no card, card failed, or card full (not in circular recording)

Orange / Green LED intermittent flashing: charging and recording

Green LED flashing: charging complete and recording

All LEDs off: charging complete and not recording

Connected to computer

Orange LED on: charging

Green LED on: charging complete

Mode switch

Switch between surveillance, on-the-go and custom modes. Default settings are in parentheses.

Note: For custom mode configuration, please use the PC software Widget to change the

settings. The widget can be downloaded from qcam.com/qsdsupport. To make the custom

mode settings effective, please push the mode switch to the “custom mode” position before

powering up the QSD-481.

When the QSD-481 is connected to the lighter through the 5V car adapter and the auto on /off

mode is selected:

Car-activated Recording: Auto-starts recording once the car is started, auto-stops recording

when car is stopped.

Car-stop Recording: Auto-starts recording when car is stopped, auto-stops recording once car is

started.

Car-activate and Car-stop Recording: Auto-starts recording once car is started and continues to

record even when the car is stopped. The camcorder needs to be turned off manually.

*For the longest recording time, set Video Quality to Low, Resolution to 320x240 and Frame

Rate to Low. This way the QSD-481 can act as a digital voice recorder.

** If a recording is started, you cannot switch betweenmodes.

*** If triggering is enabled, the QSD-481 will record for 10 seconds after powering-up. Then it

will go into standby. If there is a trigger, it will keep recording until there are no further triggers.

After that, it will record for 5 more minutes and then standby again.

PC Software Widget

To synchronize the time and customize settings, download the PC software “Widget” from

Qcam.com/qsdsupport and follow the instructions in thesoftware guide.

NOTE: If the time shown is year 2026 or beyond due to a loss of Real Time Clock, recording

time will not be shown on the video, even if timestamp is enabled. Please use the widget to

resync the time and delete files created in 2026 or beyond!

Connecting to computer

To connect the camcorder to your computer, follow these instructions:

1. Connect the larger end of the USB cable into an available USB port on the computer.

2. Connect the smaller end of the cable into the USB port of the camcorder.

3. The camcorder will appear in My Computer as a drive.

Firmware upgrades

Qcam will from time to time release new firmware for enhancements or adding new features.

Visit Qcam.com/qsdsupport to check on the latest firmware foryour QSD-481.

Environmental Requirements

Storage temperature: 32˚ to 113˚F (0˚ to 45˚C)

Operating temperature: 32˚ to 113˚F (0˚ to 45˚C)

FCC Regulation

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference,and

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason- able

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause interference to radio or television reception, which can be deter- mined by turning the

equipment off and then on, the user is encouraged to try to correct the interference by one or

more of the following measures:

1. Increase the separation between the equipment and camcorder.

2. Connect the equipment to a different outlet so that the equipment and camcorder are on

different branch circuits.

3. Consult the dealer or an experienced radio / TV technician for help.

To contact support for Qcam by Amcrest, please do one of the following:

Visit http://amcrest.com/contacts and use the email form

Call Amcrest Support using one of the following numbers

Toll Free US: (888) 212-7538

International Callers (Outside of US): +1-713-893-8956

USA: 713-893-8956

Canada: 437-888-0177

UK: 203-769-2757

Email Amcrest Customer Support supp[email protected]

Indice

Altri manuali Qcam Telecamera di sicurezza

Qcam

Qcam QSD-722 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente