Qlight S80AR Manuale utente
44
90dB
5020
1
S80AR/ S80AU
• Protection rating : IP44
• Ambient operating temperature : -20°C to +50°C
S80AUS80AR
Ordering Specications
Bulb Revolving Warning Light
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s specication.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the
product that would void the warranty.
1. During wiring or maintenance, please completely turn o the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, re, electric shock and loss of life.)
Product Specications
S80AU
-
BZ
-
220
-
R
[Model
number]
[Buzzer] [Voltage] [Color]
| | | |
• S80AR
• S80AU
• (Blank)
- No buzzer type
• BZ
- Built-in buzzer
type
• 12 - DC12V
• 24 - DC24V
• 110 -AC110V
• 220 -AC220V
R-Red
A-Amber
G-Green
B-Blue
Please scan the QR code
for more detailed product
information.
www.qlight.com
Model
number
Voltage
Current
Bulb specications
Certicate
Weight
Color
Volts/
Watts
Conguration
Part#
S80AR
S80AU
DC12V
Max. 0.484A
12V5W
T16x35 15S
5
-
0.31kg
R-Red
A-Amber
G-Green
B-Blue
DC24V
Max. 0.310A
12V5W
T16x35 15S
6
AC110V
Max. 0.080A
12V5W
T16x35 15S
5
0.50kg
AC220V
Max. 0.040A
12V5W
T16x35 15S
5
2
Parts Denition
Dimensions
(Units : mm)
Wiring Instructions
• DC/AC type cable specication : External power line - UL1015 AWG18(0.75sq) × 2C 400mm
Red
Black
White
Black
Power Power
Fuse Fuse
DC AC
Lens(AS)
Light bulb
Housing(ABS)
Reector
(Heat resistant ABS)
S80AR S80AU
S80AU
84
127
72
113
43
50
60
88
105
82
43
125
72
113
105
50
60
88
S80AR
Ø8 CABLE ENTRY
Ø83 Ø83
4-Ø4 HOLES
Ø8 CABLE ENTRY
4-Ø4 HOLES
3
• Machine holes on the mounting surface referring to the diagram below.
4-Ø4.5 HOLES
Ø8 HOLES
50
60
S80AR/ S80AU
Installation
Mounting Hole Specications
• Please mount xing board① to the mounting surface using bolts. Then, connect the power line of terminal box.
• Hook the rear of the mounting bracket of the product to the upper xing board②, then push the body against the xing board.
• After tightly attaching the product body to the mounting bracket, tighten the bolt at the bottom of the mounting bracket③.
ⴙ
ⴘ
ⴚ
Product Operation Inquiry / Customer Support +82-55-328-4082
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : A-412, 579 Kyungin-Ro, Guro-Gu, Seoul, Korea (Postal Code : 08212)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805) www.qlight.com
EN-1807A
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP44.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP44), it may cause malfunction or damage to the product.
• In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-
down positions where water can potentially penetrate into the product and impact it’s operation.
• For further information, please visit our website (http://www.qlight.com).
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Qlight Apparecchio di illuminazione
Manuali Apparecchio di illuminazione popolari di altre marche
Emos
Emos CLASSIC ZY1431T Manuale utente
Westinghouse
Westinghouse Outdoor Lighting Fixture Manuale utente
Hedler
Hedler C 12 silent Manuale utente
Blizzard Lighting
Blizzard Lighting Puck: CSI Manuale utente
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Manuale utente
Lightmaxx
Lightmaxx Shaft 5R Manuale utente
Cooper Lighting
Cooper Lighting Halo L3232E Manuale utente
Stageline
Stageline ODW-2410RGBW Manuale utente
Light Sky
Light Sky Tornado Series Manuale utente
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente
Lightolier
Lightolier Lytespan 83ED17S Manuale utente
Lightolier
Lightolier Calculite CS8226 Manuale utente