Qomo QPC30 Manuale utente

PRECAUTIONS

Please follow these precautions:

To prevent fire or shock hazard, do not expose the unit to rain or

moisture.

To prevent electrical shock, do not open the unit. Refer to qualified

personnel for service only.

Do not use the unit continuously for more than 24 hours with camera

auto focus on. It may cause damage to the camera lens.

Be careful not to spill water or other liquids onto the unit, or allow

combustible or metallic objects to get inside the base.

Unplug the visualiser from the wall outlet when it is not being

used for a long period of time.

Clean the unit with a soft cloth lightly moistened with a mild

detergent solution.

Clean the lens carefully with an air spray or soft dry cloth to avoid

scratching it.

Rotate the camera lens cap before power the unit on.

Contents

Product Introduction..................................................2

Parts Identification .....................................................3

Making Adjustments...................................................3

Control Panel ..............................................................7

Remote Control Instruction.......................................8

INSTALLING VISUALISER SOFTWARE ....................9

USB PORT.................................................................10

USB Image Capture..................................................10

Specification .............................................................12

Product Introduction

Thank you for purchasing the visualiser. This visualiser comes with a new

design which is more simple, flexible, portable and with a high resolution. The

visualiser can be used to present 3D objects, texts, graphs, transparencies

and negative films. It can be connected to projector, PC and other multi-media

equipments. The visualiser is not just a equipment in corporate environment

but also a indispensable tool to academic, medical and scientific community.

Parts Identification

Making Adjustments

On the visualiser, there are six places can be adjusted.

1. Adjust Mechanical Arm

This adjustment can increase and decrease image. Hold the visualiser

base with one hand, carry the mechanical arm with another hand and

adjust it up and down. The mechanical arm can be moved from almost any

angle.

2. Adjust LED light

The LED light can be rotated 90 degrees. (as blow illustration)

3. Adjust Camera Box

Hole the camera box and rotate it up and down. The camera box can be

rotated 45 degrees. (as blow illustration)

Hold the camera box and rotate it left and right. The camera box can be

rotated 90 degrees. (as blow illustration)

4. Adjust Camera Head

Hold the camera connector with one hand, rotate the camera box connector

with another hand. The camera head can be rotated 90 degrees. (as blow

illustration)

5. Adjust Base Bracket

Hole the vislualizer base with one hand, rotate the base bracket with another

hand. The base bracket can be rotated 45 degrees. (as blow illustration)

Notice: Do not rotate the parts emphatically when the rotation

reached maximum.

Control Panel

There are four touch buttons located on the top of visualiser base:

T: Enlarge image

:Reduce image

·LED Light：Turn the LED light on/off

·Power: Turn the visualiser on/off

·Pilot Light: On normal operations a blue color will be lit, in standby mode the

color of the light will be red.

Remote Control Instruction

POWER (Control the visualiser On/Off)

SAVE (Save captured images)

RECALL (Multiple Screen Display)

LAMP (Control the arm lights)

ROTATE (Rotate the image)

FREEZE (Freeze the image)

NEG (Display film negatives)

MIRROR (V-Reverse the image)

XGA (Switch between XGA (1024 x 768) and SXGA (1280 x 1024) mode)

TEXT (Switch between image/text mode)

B&W (Switch between Color mode and Black & White mode)

TITLE (Freeze the top 1/8 of the screen)

SPLIT (Image Split function)

PROJECTOR POWER (No function)

PROJECTOR INPUT (No function)

EXIT (Exit selected function)

TELE/ IDE (Increase and decrease magnification)

FAR/NEAR (Focus near or far)

AUTO (To auto adjust brightness, auto white balance and auto focus)

CAM/PC1/PC2 (No function)

S-VIDEO/VIDEO (No function)

VOLUME+/- (No function)

RED+/- (Increase or decrease the red hue)

BLUE+/- (Increase or decrease the blue hue)

BRIGHT+/- (Increase or decrease the brightness)

SCROLL /(No function)

INSTALLING VISUALISER SOFTWARE

This function is to snap and display images with the USB interface, which

includes displaying static and dynamic pictures, snapping dynamic images

and playback the dynamic images with the Windows Media Player or its

own player.

Insert the CD-ROM that comes with the visualiser into the CD-ROM

drive.

A. Click the Install Capture Program button to install the program that

captures images in the AVI or JPG format.

B. After the installation is finished, then click the Exit button to exit the

Software Setup window.

C. Shut down your computer when prompted in order for the changes to

take effect.

D. Use the USB2.0 cable provided to connect your computer to the

visualiser before your computer is restarted.

USB PORT

The USB port can be used to store still images from the visualiser in a

computer. Connect the visualiser to your computer with the supplied

USB cable. The visualiser software is available on the supplied

CD-ROM.

* Please pay attention to the following:

1. Computer hardware requirement: CPU: 2.4GHz, RAM: 256M or

above, Graphic card 64M, USB 2.0 port, Hard disk 40G or more,

Monitor display resolution higher than XGA (1024*768).

2. Operating system: Windows XP SP2 (Service Pack 2).

3. Must use a high-speed USB 2.0 cable provided

4. When connecting the visualiser to a desktop computer with the

high-speed USB 2.0 cable provided, we recommend using the USB

port located on the rear of the mainframe. The USB port on the

front of the computer might have interference.

USB Image Capture

You can capture and control images on the visualiser from a computer

connected with a USB connector.

Click [Start] -> [Program] -> [VideoCap] -> “VideoCapx.xx” (x.xx is

software’s version) to open the software.

Altri manuali per QPC30

Indice

Manuali Telecamera per documenti popolari di altre marche

AVer

AVer AVerVision F35 Manuale utente

Lumens

Lumens PS760 Manuale utente

Genee World

Genee World GV8100 Manuale utente

Touchboards

Touchboards Vidifox DV 480 Manuale utente

Dukane

Dukane 210 Manuale utente

TTS

TTS Easi-View Pro Manuale utente

Lumens

Lumens dc153 Manuale utente

Avermedia

Avermedia AVerVision SPB350 Manuale utente

AVer

AVer TR311V2 Manuale utente

Inswan

Inswan INS-3 Manuale utente

Genee

Genee Vision 6100 Manuale utente

Rolls

Rolls DB14 - 02/10 Manuale utente

Lumens

Lumens DC-W80 Manuale utente

AVer

AVer AVerVision SPB350+ Manuale utente

Dukane

Dukane FASTFAX AV-P750U Manuale utente

Optoma

Optoma DC554 Manuale utente

Ipevo

Ipevo Ziggi Manuale utente

Vidifox

Vidifox PV 380 Manuale utente