Qsan XN8016R Manuale utente

XN8016R Hardware

Owner’s Manual

QSAN Technology Inc. www.qsan.com

No part of this document may be reproduced or transmitted without written permission from QSAN Technology, Inc

Edition 1.0 (April 2018)

This edition applies to QSAN XCubeNAS XN8016R NAS storage systems. QSAN believes the

information in this publication is accurate as of its publication date. The information is subject to change

without notice.

Trademarks

QSAN, the QSAN logo, XCubeNAS, and QSAN.com are trademarks or registered trademarks of QSAN

Technology, Inc.

Intel, Xeon, Pentium, Core, Celeron and Intel Inside logo are trademarks of Intel Corporation in the United

States and other countries.

Other trademarks and trade names used in this document to refer to either the entities claiming the

marks and names or their products are the property of their respective owners.

Notices i

Notices

The Information contained in this manual has been reviewed for accuracy. It may include

typographical errors or technical inaccuracies. Changes are made to the document

periodically. These changes will be incorporated in new editions of the publication. QSAN may

make improvements or changes in the products. All features, functionality, and product

specifications are subject to change without prior notice or obligation. All statements,

information, and recommendations in this document do not constitute a warranty of any kind,

express or implied.

Any performance data contained herein was determined in a controlled environment.

Therefore, the results obtained in other operating environments may vary significantly. Some

measurements may have been made on development-level systems and there is no guarantee

that these measurements will be the same on generally available systems. Furthermore, some

measurements may have been estimated through extrapolation. Actual results may vary.

Users of this document should verify the applicable data for their specific environment.

This information contains examples of data and reports used in daily business operations. To

illustrate them as completely as possible, the examples include the names of individuals,

companies, brands, and products.

All of these names are fictitious and any similarity to the names and addresses used by an

actual business enterprise is entirely coincidental.

Regulatory Statements

CE Statement

This device has been shown to be in compliance with and was tested in accordance with the

measurement procedures specified in the Standards and Specifications listed below.

Technical Standard: EMC DIRECTIVE 2014/30/EU Class A

(EN55032 / EN55024)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and uses in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Notice: The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equivalent.

BSMI Statement

VCCI Statement

VCCI-A

KCC Statement

A ( )

(A ) ,

(This equipment has approved for EMC on purpose of business use and there is possible for

radio interference for home use.)

Notices iii

Safety Warnings

1. The XCubeNAS can operate normally in the temperature of 0ºC~40ºC (31.99 ~ 103.99°F).

Please make sure the environment is well-ventilated.

2. The power cord and devices connected to the XCubeNAS must provide a correct supply

voltage (100-127V~/ 10A, 50-60Hz. 200-240V~/ 5A, 50-60Hz).

3. Do not place the XCubeNAS in direct sunlight or near chemicals. Make sure the

temperature and humidity of the environment are in the optimized level.

4. Place the product right side up at all times.

5. Unplug the power cord and all connected cables before cleaning. Wipe the XCubeNAS

with a dry towel. Do not use chemical or aerosol to clean the NAS.

6. Do not place any objects on the XCubeNAS for the server’s normal operation and to avoid

overheat.

7. Use the screws provided in the product package to lock the hard disks in the XCubeNAS

when installing hard disks for proper operation.

8. Do not place the XCubeNAS near any liquid.

9. Do not place the XCubeNAS on any uneven surface to avoid falling off and damage.

10. Do no place the XCubeNAS on the ground and do not step on the system to prevent any

potential damages.

11. Make sure the voltage is correct in the location where the XCubeNAS is installed. Contact

the distributor or the local power supply company for the information.

12. Do not place any object on the power cord.

13. Do not attempt to repair the XCubeNAS in any occasions. Improper disassembly of the

product may expose the users to electric shock or other risks. For any inquiries, please

contact the distributor.

14. To remove all electrical current from the device, ensure that all power cords are

disconnected from the power source.

15. The XCubeNAS should only be installed in restricted access location such as in the

server room and maintained by the qualified service person. The server room is locked

by key or keycard, or other means of security access and only a qualified service person

is allowed to enter the server room.

CAUTION: (English)

Replacing incorrect type of battery will have the risk of explosion. Please

replace the same or equivalent type battery use and dispose of used

batteries according to the instructions.

INFORMATION:

QSAN provides a limited warranty for QSAN-branded hardware products:

System hardware and peripheral product (s): 3 years limited warranty

from date of original purchase.

For more detail warranty policy, please refer to QSAN official website:

https://www.qsan.com/en/warranty.php

Contents v

Table of Contents

Notices ........................................................................................................................................... i

Regulatory Statements .................................................................................................................... i

Safety Warnings ..............................................................................................................................iii

Preface ..........................................................................................................................................7

About This Manual .......................................................................................................................... 7

Related Documents......................................................................................................................... 7

Technical Support ........................................................................................................................... 8

Information, Tip and Caution.......................................................................................................... 8

Conventions..................................................................................................................................... 9

1. Overview.............................................................................................................................10

1.1. Package Contents............................................................................................................. 10

1.2. XN8016R Product Overview............................................................................................. 11

2. Hardware Overview ...........................................................................................................13

2.1. Front and Rear Panel ........................................................................................................ 13

2.2. System Disk Drive Numbering ......................................................................................... 16

2.3. Disk Drive Form Factors ................................................................................................... 16

3. Install the System Hardware ............................................................................................17

3.1. Install the Disk Drive in the Tray....................................................................................... 17

3.2. Upgrade Memory .............................................................................................................. 21

3.3. Install the Optional Host Card.......................................................................................... 25

3.4. Replace System Fan ......................................................................................................... 28

3.5. Replace Malfunctioning PSU............................................................................................ 29

3.6. Replace System Controller............................................................................................... 29

3.7. Install the Rail Kits ............................................................................................................ 31

3.8. Connect the System to the Host...................................................................................... 34

3.9. Start Up Your System........................................................................................................ 35

4. Discover and Install QSM..................................................................................................37

5. Restart/Shutdown/Logout QSM ......................................................................................40

6. Reset to Default.................................................................................................................42

7. LED Indicator Table ...........................................................................................................45

7.1. XN8016R LED Indicator Table.......................................................................................... 45

7.2. Host Card LED Indicator Table......................................................................................... 48

8. Buzzer Indicator Table ......................................................................................................49

9. Deployment Topology .......................................................................................................50

9.1. Expansion Configuration Rules........................................................................................ 50

9.2. Cabling the System........................................................................................................... 51

10. Quick Maintenance............................................................................................................54

10.1. Replace Fan Module ......................................................................................................... 55

10.2. Replace Power Supply Unit .............................................................................................. 56

11. Support and Other Resources ..........................................................................................58

11.1. Getting Technical Support................................................................................................ 58

11.2. Documentation Feedback ................................................................................................ 59

Appendix .....................................................................................................................................60

End-User License Agreement (EULA) .......................................................................................... 60

Recommended Optional Module List .......................................................................................... 63

Expansion Enclosure List.............................................................................................................. 64

Preface

About This Manual

This manual provides technical guidance for designing and implementing QSAN XN8016R

system, and it is intended for use by system administrators, NAS designers, storage

consultants, or anyone who has purchased this product and is familiar with servers and

computer networks, network administration, storage system installation and configuration,

network attached storage management and relevant protocols.

CAUTION:

Do NOT attempt to service, change, disassemble or upgrade the

equipment’s components by yourself. Doing so may violate your warranty

and expose you to electric shock. Refer all servicing to authorized service

personnel. Please always follow the instructions in this owner’s manual.

Manuali Server di archiviazione di rete popolari di altre marche

HP NetStorage 6000 Manuale utente

Seagate

Seagate U10 ST320423A Manuale utente

Synology

Synology RackStation RS816 Manuale

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manuale utente

Avid Technology

Avid Technology VideoRAID ST Guida di sicurezza

Western Digital

Western Digital My Cloud Home Duo Manuale utente

PrimeArray

PrimeArray 4xxx Manuale utente

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manuale utente

Planex

Planex MZK-NAS01SG Manuale utente

Intel

Intel SS4000-E - Entry Storage System NAS Server Manuale utente

Synology

Synology RS2212+ Manuale utente

Allnet

Allnet ALL69000 Manuale utente

Adaptec

Adaptec 5325301580 Manuale utente

Motorola

Motorola EXORdisk II Manuale utente

Sony

Sony XDAAI1PK Manuale utente

Cisco

Cisco Linksys NAS200 Istruzioni operative originali

Sans Digital

Sans Digital MR4UT6G Manuale utente

AIC

AIC FB128-LX Manuale utente