QSC Q-SYS CORE NANO Istruzioni per l’uso
TD-001615-00-A
*TD-001543-01*
™
Hardware User Manual
CORE NANO - NETWORK I/O PROCESSOR
CORE 8 FLEX - USB/FLEX CHANNELS
2
TD-001615-00-A
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in
damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term "NOTE" is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol within an equilateral triangle is to alert the user to the presence of un-insulated
"dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and
maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING! TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the
rack environment may be greater than room ambient. Consideration should be given to ensure that the maximum operating temperature
range 0°C to 50°C (32°F to 122°F) is not exceeded. Reduced Air Flow – Installation of the equipment in a rack should be such
that the amount of airflow required for safe operation of the equipment is not compromised.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not submerge the apparatus in water or liquids.
7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
8. Clean only with a dry cloth.
9. Do not block any ventilation opening. Installation next to another unit within a rack should allow sufficient air flow required for safe operation.
10. Keep the side ventilation openings free of dust or other matter.
11. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
12. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protecting earthing connection.
13. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
14. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the
apparatus.
15. Do not unplug the unit by pulling on the cord, use the plug.
16. Only use attachments/accessories specified by the manufacturer.
17. Unplug this apparatus during lightning storms or when unused for long periods of time.
18. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
19. The appliance coupler or the AC Mains plug is the AC mains disconnect device and shall remain readily accessible after installation.
20. Adhere to all applicable local codes.
21. Consult a licensed, professional engineer when in doubt or questions arise regarding a physical equipment installation.
3
TD-001615-00-A
Maintenance and Repairs
WARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted
maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of
additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station
or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of
the customer, owner or user of the apparatus to facilitate those repairs.
Limited Battery Warning
WARNING!: THIS EQUIPMENT CONTAINS A NON-RECHARGEABLE LITHIUM BATTERY. LITHIUM IS A CHEMICAL KNOWN TO THE STATE
OF CALIFORNIA TO CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGEABLE LITHIUM BATTERY CONTAINED IN THIS EQUIPMENT
MAY EXPLODE IF IT IS EXPOSED TO FIRE OR EXTREME HEAT. DO NOT SHORT CIRCUIT THE BATTERY. DO NOT ATTEMPT TO RECHARGE
THE NON-RECHARGEABLE LITHIUM BATTERY. THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Expected Product Life Cycle: 20 years, Storage Temperature range: –20°F to +70°F, Relative Humidity: range of
5 - 85% RH non-condensing.
Warranty
For a copy of the QSC Limited Warranty, visit the QSC, LLC., website at www.qsc.com.
Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC, LLC., en www.qsc.com.
Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC, LLC., à www.qsc.com.
Besuchen Sie die Webseite von QSC, LLC. (www.qsc.com) um eine Kopie der beschränkten Garantie von QSC zu erhalten.
Para uma cópia da garantia limitada da QSC visite o site da QSC, LLC., em www.qsc.com.
RoHS Statement
The QSC Q-SYS Core 8 FLEX Series is in compliance with European Directive 2011/65/EU – Restriction of Hazardous Substances (RoHS2).
4
TD-001615-00-A
What's in the Box
(1x)
Q-SYS Core 8 FLEX
or Q-SYS Core NANO
(8x)
Flex
Channels
(blue)
Core 8 FLEX only
(2x)
GPIO
(black)
Core 8 FLEX only
(2x)
RS232 Tx/Rx
(black)
(2x)
Rack-Ear
Cover Label
(2x)
Joining
Plate
(2x)
Rack Spacer
Plate
(2x)
Rack Ear
(6x)
Phillips Pan Head
M4x7mm
(6x)
Phillips Flathead
M3x6mm
(1x)
AC Power cord
(4x)
Foam Spacer
(1x)
QSC Warranty
TD-000453
(1x)
Safety and
Regulatory Statements
TD-001616-00-A
Introduction
The Q-SYS™ Core 8 FLEX is the ideal processing solution for today's smaller and dynamic spaces that utilize an increasing number of network I/O
endpoints, yet still require some highly flexible analog audio and general purpose I/O for legacy device integration.
The Q-SYS™ Core NANO offers purely network AV&C processing designed to support centralized processing for multiple rooms and/or installations
that rely solely on networked, IP-based endpoints providing a significant cost savings in applications not requiring analog I/O on the processor.
These platforms extend Q-SYS' reach into more modest every-day projects leveraging all the features available across the entire Ecosystem for use
in applications ranging from Acoustic Echo Canceling (AEC) and sound reinforcement in small to medium meeting or multipurpose rooms, sound
reinforcement in performance venues such as house of worship and theater, background music systems to paging in airports, convention centers
and hospitals.
The Core 8 FLEX and Core NANO are multipurpose software-based audio and control processors in a compact form factor. Core 8 FLEX features
a bank of 8 patented FLEX Channels, each channel independently configured during design or run time as either a microphone/line level input
or a line level output while the Core NANO utilizes purely network-based I/O. The Core 8 FLEX and Core NANO combine class leading power and
flexibility with specialized I/O such as VoIP, Internal Solid State Drive Playback/Recording and USB audio I/O plus USB A/V bridging.
The Cores' USB device connections enable the processors to appear in a Microsoft Windows or macOS host operating system simultaneously
as both a USB Audio, Video and Communications device supporting up to 8x8 digital audio channels in a flexible, design time configuration
environment that can advertise as multiple virtual USB device instances to the host operating system concurrently over a single physical USB
connection. Additionally, USB Host ports enable the Cores to host external USB devices and future Q-SYS peripheral products.
5
TD-001615-00-A
Installation
Ventilation
Minimum open space of 6 inches measured from the back of the
Q-SYS Core 8 FLEX or Core NANO
.
NOTE: In order to provide adequate dissipation
of heat, keep the space directly to the rear of the
Q-SYS Core 8 FLEX
or Core NANO free of
obstacles.
Select the Installation Configuration
Choose one of the following configuration options:
A. One Core 8 FLEX or Core NANO 19-inch Rack (Left or
Right Mount)
B. Two Core 8 FLEXes or Core NANOs 19-inch Rack
C. One Core 8 FLEX or Core NANO Half Rack
D. Under Table or on Wall
6
TD-001615-00-A
7
TD-001615-00-A
Rack Mounting Options
D
8
TD-001615-00-A
Front Panels
123
123
1. Power LED – illuminates blue when the Q-SYS Core 8 FLEX is
powered on
2. ID LED – LED blinks when placed into ID Mode via ID Button or
Q-SYS Configurator Software
3. ID Button – Locates the Q-SYS Core 8 FLEX in Q-SYS Designer
GUI and Configurator. Pressing the ID button for approximately 10
seconds invokes "Reset Network Settings" function.
9
TD-001615-00-A
Rear Panel
(Note: Q-SYS Core 8 FLEX shown. Q-SYS Core NANO does not include FLEX channels or GPIO)
— Figure 1 —
1. FLEX Channels – eight user-configurable analog audio
input/output channels, phantom power on inputs.
2. +12 VDC – up to 0.1A source. Connector pins "+".
3. GPIO Outputs – 8 outputs, open collector (24V, 0.2A max.)
with p/u to +3.3V (lower pins 1 – 8).
4. GND – earth ground. Connector pins with ground symbol.
5. GPIO Inputs – 8 inputs, 0-24V analog input or contact closure
(upper pins 1 – 8).
6. RS232 – COM x2. 3-position, 3.5mm connector.
7. USB Type C – USB 3.1, Host port or Device port (Device port
functionally available when USB Type B not in use).
8. USB Type B – USB 3.0, dedicated Device port.
9. LAN A – RJ45, 1000 Mbps, primary, Q-LAN, AES67, Dante,
VoIP, WAN streaming, control.
10. USB Type A – USB 3.0 x2, Host ports.
11. LAN B – RJ45, 1000 Mbps, backup, Q-LAN, AES67, Dante, VoIP,
WAN streaming, control.
12. USB Type A – USB 3.0 x2, Host ports.
13. AC mains – IEC 60320, C14 receptacle, universal power in
(100V – 240V, 50/60 Hz).
10
TD-001615-00-A
Bottom
Connections
1. Optional Mounting – bosses x2 accommodate
joining plates for side-by-side or surface mounting
installations.
2. Serial Number – product serial number.
3. Agency Declarations
(Note: Q-SYS Core 8 FLEX and Core NANO
share the same bottom attributes)
(Note: For GPIO connections and application examples, refer to "I/O-8 FLEX Technical Note - Using GPIO Inputs and Outputs" available at www.qsc.com.)
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali QSC Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
