Quantex ScanDoc Compact Manuale utente
Instruction Manual
ScanDoc
COMPACT
QUANTEX
Contents
2
QUANTEX GmbH 2014
Introduction 3
Safety precautions and warnings 4
Installation 5
Minimum system hardware requirements 5
Program installation 5
Connection 6
On-line activation 8
ScanDoc program description 10
Program settings 10
Main menu 13
Identication 13
Diagnostic Trouble Codes 14
Hot keys 30
Manufacturer 31
Introduction
Use
A multi car diagnostic scanner ScanDoc Compact is used for the information
readout from the car engine control modules (ECM) via the diagnostic outlet
OBD-II.
Functionality
• Reading and error codes decoding.
• Errors reset.
• Display of current data both in digital and graphical formats.
• Final controlling drives actuation.
• Systems identication (controlling units).
• Immobilizer device reading and programming.
Available Interfaces
• Russian.
• English.
• German.
• Greek.
Hardware specication
• CPU: 32bit, 72 MHz.
• RAM: 32 МB.
• Protocols hardware support: KL-Line, 2xCAN, VPW, PWM, J1708.
• Protocols software support: KW71, KW81, KW82, KW1284, DS2, ISO8,
ISO14230, ISO9141, ISO15765, J1979, J1850, TP2.0, J1939.
• Integrated electronic commutation: 13 channels.
• Connection with РС: WI-FI IEEE 802.11b 100 mV (54 Mb/s).
• Power supply: 9-30 V DC.
Service and operation conditions
• Operating temperature: 0-50°C.
• Maximum relative humidity: 80% (up to 30°С) and 50% (at 40°C and
higher).
• Any liquids inside the device are inadmissible .
General characteristics
• Scanner dimensions: 24х44х93 mm.
• Weight: 67 gram.
3
QUANTEX GmbH 2014
Safety precautions and warnings
Read this instruction manual rst and then use the device. Make sure you’re
aware of the instruction manual information. The Manufacturer isn’t responsible for
accidents involving injuries, except equipment manufacturing defects.
4
QUANTEX GmbH 2014
Poisoning
Test an operative vehicle in a well ventilated work area. The engines
vent the carbon oxide, it’s an odourless toxic gas with slow reaction
time that can result in a serious injury or death.
Personal injury
Link on the hand break before using the device. Use break shoes
for front drive vehicles, as the hand break doesn’t block major front
wheels.
Test during driving
Don’t test the car while driving. Carelessness may lead to a fatality.
One person must do the test while another one is driving the vehicle.
Don’t place a laptop or a tablet PC ahead when driving a car. The
laptop may cause an injury to you if a safety bag comes into ac-
tion. Don’t scan safety bag system SRS while driving the car, as the
safety bag may operate unintentionally.
Electrical elements
Always cut the ignition off by connection and disconnection of elec-
trical elements, if there aren’t any other special instructions.
Battery energy storage (BES)
Don’t put a device on the BES of a vehicle. It can short the BES ter-
minals out, that may result in a personal injury as well as device and
the battery fault.
Installation
To start, do the following:
Step 1 - Make sure your PC meets the system hardware requirements.
Step 2 - Install the ScanDoc program to your PC.
Step 3 - Connect the adapter to the car and the PC.
Step 4 - Activate the device on-line.
The device is ready for service.
Step 1 - Minimum system hardware requirements
• CPU Intel Core 2 Duo 2 GHz.
• RAM 512 MB.
• Display adapter 1024х768, True-Color.
• OS Windows 7 / 8
• Internet (to update the adapter rmware and new rmware unlocking for the
cars only).
• Wireless LAN controller 802.11 g/n.
Step 2 - Program installation
To install the program, use USB Flash Drive containing the software and start the
le Setup.exe.
The software is also available at the manufacturer’s site at: www.quantexlab.
com.
5
QUANTEX GmbH 2014
Step 3 - Connection
1. Connect ScanDoc Compact to the car diagnostic outlet OBD-II.
2. Connect to the PC via the wireless network Wi-FI. Select QUANTEX in the Wi-
FI connections list available on the PC.
This is the easiest way to connect.
Note: This option within the Wi-Fi device unit is default
6
QUANTEX GmbH 2014
Wi-Fi
Guest
Quantex
Connect 2
If the adapter is connected to the PC successfully, there will be a green indicator,
showing the robust connection to the adapter. To make sure the scanner ScanDoc
Compact is connected to your PC, select the button Connection Test in the tab
Options.
Connection via Wi-Fi with internet access point
If it ‘s necessary to work with several devices via wireless connection or the
wireless connection has been already set up, this connection via Wi-Fi with Inter-
net Access Point is used. In this case you may need to change an IP-address of
the diagnostic scanner ScanDoc Compact.
For more information on types of connection and additional settings, please visit
our web site: www.quantexlab.com
7
QUANTEX GmbH 2014
8
QUANTEX GmbH 2014
Step 4 - On-line activation.
To activate, do the following:
1. Connect ScanDoc Compact to the car diagnostic outlet OBD-II.
2. Connect to the PC via the wireless network Wi-Fi.
3. Select the button Get key in the tab Options (The PC should be connected to
the Internet).
4. If the program and remote server are connected successfully, a message say-
ing the key is received successfully will appear.
5. Press the button Upload key to save the information received to the ScanDoc
Compact adapter.
6. After the Key is saved into the adapter, the program will reload ScanDoc
Compact automatically.
If a PC can’t be connected both to the Internet and to the scanner ScanDoc Com-
pact simultaneously (e.g. a PC has an Internet access via Wi-Fi router), please do
the following:
1. Don’t connect to the adapter ScanDoc via wireless network Wi-Fi and try to
start ScanDoc program. Using the PC connect to the Internet and press the
button Get key (or the button Activation via the Internet) in the tab Options.
You will see this message:
2. Select the adapter type (ScanDoc Compact) and its serial number in the win-
dow. If the program and the remote server are connected successfully, there
will be a message saying the key is received successfully.
3. Disconnect from the wireless network for the Internet access and connect to
the Internet Access Point QUANTEX.
4. Select the button Upload key to save the received information to the Scan-
Doc Compact adapter.
5. After the key is saved to the adapter the program will automatically reload
ScanDoc Compact.
Actuators
There are the reset switch to factory settings.
The device condition is shown by inboard LED indicators. They are on after the
power is supplied to the device and the integral test is run.
Device power supply
ScanDoc Compact gets the power supply from the car diagnostic outlet OBD-II.
Possible Reasons for Power Supply Absence:
• The adapter is put in to the car diagnostic socket incorrectly.
• The adapter output connectors are damaged.
• The car wiring before the diagnostic outlet is faulty.
9
QUANTEX GmbH 2014
Connector view. End view.
Indicators (light) condition Description
The device is switched off.
The PC is connected to Wi-Fi.
The data interchange is in process.
When it is on:
Integral hardware- based test is run. The red indicator
should go off in a while after it’s been switched on.
• If the indicator is dull, then there are not any pro-
grams in the adapter or the program is corrupted. To
restore it, one should activate the device.
• If the indicator ashes on and off and doesn’t go off,
then the unit is out of service. Contact your seller.
When operated on:
• Emergency activity. Don’t switch the power off till the
activity is nished.
10
QUANTEX GmbH 2014
ScanDoc program description
Program settings
The section Options contains 3 subsections, connected to the device operation
and program settings.
System
This tab is for the program system settings. It contains the basic information on
the scanner connected (the serial number, type, IP-address, database version, etc.),
and can update its rmware, run the connection test, view the log-les folder and
activate the device.
Database version:
Make sure you use the latest database version. New program version can be al-
ways downloaded from the corresponding section at our site: www.quantexlab.com
Serial number:
Indice
