Quanturi HAYTECH Manuale utente

Temperature monitoring system

with base staon QNT302-00

User manual

Manuel d‘ulisaon

Gebrauchsanweisung

HAYTECH

Tango M

Tango XN

transmion or transcripon of this

manual are not permied without

Quanturi's prior consent. Quanturi

reserves the right to change the content

of this manual at any me and without

prior noce.

In case of problems please

contact:

[email protected]

Find more instrucons at:

www.quanturi.com/resources

Support

English 4

Base staon 6

Troubleshoong 9

HAYTECH probes 10

Tango and Tango XN probes 13

Français 16

Lecteur 18

Problèmes techniques 21

Sondes HAYTECH 22

Sondes Tango et Tango XN 25

Deutsch 28

Basisstaon 30

Problembehebung 33

HAYTECH Sensoren 34

Tango und Tango XN Sensoren 37

Content EN

English

User Manual

Usage and precauons

The User is expected to thoroughly familiarize themselves with the

system usage instrucons, and then use the product with care and

diligence.

The User's installaon of the system is not to replace the normal usage

and safety precauons that the User should connue to take to avoid

a re breaking out. The system acts as an addional tool to safeguard

the material, but under no circumstances should it be used as the sole

surveillance system. Quanturi cannot be held responsible for a re

breaking out nor for any of the consequences of this.

The User undertakes to regularly check that the whole Quanturi

system works properly, and to take all necessary precauons with

respect to the material’s upkeep.

The Quanturi monitoring system is used for wireless temperature

monitoring of fermentable materials during the storage period.

The Quanturi monitoring system is composed of temperature probes,

a base staon and oponal repeater(s). The temperature probes

are placed inside the fermentable materials at the me of storage.

When taking material out of the storage for use, the probes should

be removed and stored for the next batch. The repeater is used to

transmit the temperature values from the probes to the base staon.

The base staon sends the measurement data to Quanturi.app.

This manual walks you through the installaon and setup procedure.

Aer going through all the steps in this manual, the Quanturi

monitoring system is ready for use.

The User hereby notes that each temperature probe is to be used to

measure the temperature of only the material the probe is inserted in,

and may not be used to measure several nearby enes.

Furthermore, the User undertakes to remove the temperature

probes from the material before it is used for any purpose other than

conservaon.

Quanturi may not under any circumstances be held liable for any

damages arising from the User's negligent use of the material whether

this be directly or indirectly, including – but not limited to – loss of

prots, loss of savings or any other damages or expense.

For more informaon about the terms of use, please visit:

hps://quanturi.com/pages/terms

4 Wait for the base staon to inialize. Aer a few minutes the

NETWORK light on the boom of the Quanturi logo turns on. It

2 Do not keep the base staon

on a metallic surface. Keep the

base staon at least 10 cm away

from solid metallic structures.



200 m

50 m

3 Use the included network

cable to connect the base

staon to an internet router or

modem. Connect the included

power supply to an electrical

outlet in your home or oce.

Base staon

1 Use the included stand to

keep the base staon vercal.

Do not keep the base staon in

a horizontal posion.



220V

NETWORK

ADAPTER

200 m

200 m 200 m

200 m



220V

NETWORK

ADAPTER

200 m

200 m 200 m

200 m

3 Create an account by

specifying your username,

password, company, address,

and phone number. You will

receive an SMS to conrm your

phone number. Alerts will be

sent to this phone number.

4 Upon your rst login, you will

be promted to add your probes

to the system, using code 2 from

your probe package.

1 Go to the web address:

www.quanturi.app/acvaon

to start the acvaon.

2 Acvate your system by

entering code 1 from your base

staon package.

Acvaon

QNT100-00

CODE-1234

EFGH-5678

HAYTECH System 10

www.quanturi.app/activation

Activation code 2 / Code d’activation 2

PRODUCT STICKER

ACTIVATION STICKER

PROBE ID X00001, X000002, X000003, X000004,

X000005, X000006, X000007, X000008, X000009,

X000010

BS ID X0000001

MADE IN FINLAND

PAP



220V

NETWORK

ADAPTER

200 m

200 m 200 m

200 m

Indicator Lights

79°C

74°C

68°C

62°C

55°C

49°C

45°C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

220V

NETWORK

ADAPTER



2 m



79°C

74°C

68°C

62°C

55°C

49°C

45°C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

220V

NETWORK

ADAPTER



2 m



The DATA indicator is on, when the base staon has stored new data

to be sent to the Quanturi server. The indicator light is blinking when

the base staon is receiving data from the sensors.

DATA

Data

NETWORK

Network

The NETWORK indicator is on when the network connecon is

established. The indicator is blinking when the base staon is sending

data to the Quanturi.app server. If the indicator is o, check the

internet connecon.

79°C

74°C

68°C

62°C

55°C

49°C

45°C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

220V

NETWORK

ADAPTER



2 m



79°C

74°C

68°C

62°C

55°C

49°C

45°C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

220V

NETWORK

ADAPTER



2 m



ALERT

Alert

The ALERT indicator is on when one or more sensors have measured

temperatures above the alert level. You will receive SMS alert

messages in alert situaons.

79°C

74°C

68°C

62°C

55°C

49°C

45°C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

220V

NETWORK

ADAPTER



2 m



79°C

74°C

68°C

62°C

55°C

49°C

45°C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

220V

NETWORK

ADAPTER



2 m



220V

NETWORK

ADAPTER

200 m

200 m 200 m

200 m

indicates that the base staon is

connected to the network and

operaonal.

5The temperature probes start

sending temperature data within

1 hour from the base staon

start-up. Login to:

www.quanturi.app

for the data visualizaon.

79°C

74°C

68°C

62°C

55°C

49°C

45°C

38 °C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

220V

NETWORK

ADAPTER



2 m



If the "NETWORK" LED does not light up:

B Unplug and reconnect the

power cable while leaving the

network cable plugged in.

C If the problem persists, contact: [email protected]

A Make sure to register to the

Quanturi.app service before

installing the base staon.

Quanturi.app

Quanturi.app is the service

applicaon for visualizing the

sensor temperatures and for

customizing your account

sengs. The applicaon is

available under the web address:

hps://www.quanturi.app.

79°C

74°C

68°C

62°C

55°C

49°C

45°C

38 °C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

220V

NETWORK

ADAPTER



2 m



Quanturi system acvaon.

27.6.2018

ALARM

Sensor 5498 73°C

12.7.2018

ALARM

Sensor 5487 71°C

79°C

74°C

68°C

62°C

55°C

49°C

45°C

38 °C

38°C

35°C

Quanturi

79°C

74°C

68°C

62°C

55°C

49°C

45°C

38 °C

38°C

TemperatureID

1321

1232

1234

2223

1112

2333

2096

2124

2243

Connecon symbols

Excellent Signal - Probes are sending data every hour

Good Signal - Probes are sending data every hour

Weak Signal - Probes may occasionally fail to send regular data.

Very Weak Signal - Probes may fail to send regular data even

for long periods of me. Please refer below to solve this issue.



220V

NETWORK

ADAPTER

200 m

200 m 200 m

200 m



220V

NETWORK

ADAPTER

200 m

200 m 200 m

200 m



220V

NETWORK

ADAPTER

200 m

200 m 200 m

200 m



220V

NETWORK

ADAPTER

200 m

200 m 200 m

200 m

If you don't receive any data in your dashboard:

1 Make sure you wait for at least one hour aer installing the base

staon unl the probes send the rst data.

2 Check that you have connected the baeries of the probes

properly. (HAYTECH probes only)

3 Check that the base staon is connected to the internet (the green

NETWORK indicator should be on).

4 Check that the base staon is within the specied range from the

probes. (This also applies to the repeater, if installed.)

5 To check if the probes are working, move some of them closer to

the base staon and wait for 2-3h.

A) If you receive some data, it means that your base staon is

too far away from the other probes in the storage.

B) If you don't receive any data, contact [email protected]

6 If you have a repeater, place some of the probes closer to the

repeater and wait for 2-3h.

A) If you receive some data, it means that your repeater is too

far away from the other probes in the storage. Move it closer

to the probes in the storage.

B) If you don't receive any data, it means that your repeater is

too far away from the base staon. Move it closer.

7 If you sll don't receive any data at this point, contact us at

[email protected]

If one of your probes is not sending data:

1 Check that you have connected the baeries of the probes

properly. (HAYTECH probes only)

2 Place the probe closer to the repeater and wait for 2-3h.

A) If you receive some data, it means that your probe is too far

from the repeater. Move it closer.

B) If you don't receive any data, contact [email protected]

The base staon communicates wirelessly with the repeater near the

hay storage. The distance between the base staon and the repeater is

ideally less than 200 meters.

Repeater

For professional

use only

Store at room

temperature

Do not store the

probes up-side down

Sharp spike, please

handle with care

Safety instrucons

Follow the safety instrucons to prevent harm or injury to yourself and

people near you when using the Quanturi System.

HAYTECH probes

Altri manuali per HAYTECH

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Quanturi Attrezzature agricole

Quanturi

Quanturi HAYTECH Manuale utente

Manuali Attrezzature agricole popolari di altre marche

GSi

GSi PNEG-2314 Manuale utente

Checchi & Magli

Checchi & Magli TEXDRIVE Manuale utente

Amazone

Amazone Cenius 4003-2TX Manuale utente

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuale utente

Cima

Cima BLITZ Istruzioni operative e di manutenzione

Amazone

Amazone CombiDisc 3000 Istruzioni per l'installazione

HE-VA

HE-VA Disc-Roller XL Contour Manuale utente

AGT

AGT AGT-SSFM Manuale utente

Milestone

Milestone 72-84 Manuale utente

KUHN

KUHN Hector 3000 Manuale utente

Krone

Krone X-Disc 6200 Manuale utente

Eliet

Eliet DZC450 Manuale utente

Taarup

Taarup BIO+ B4000 Manuale utente

Garland

Garland SHAKER 310 DPG Manuale utente

stable comfort

stable comfort StableWall System Manuale utente

Raven

Raven AccuBoom Manuale utente

International

International 710 Manuale utente

Ashland

Ashland HDW-3217-14 Manuale utente