Quasar SQ4800 Manuale utente
48” LED HDTV
SQ4800
INSTRUCTION MANUAL
Please read this manual carefully before start using this TV.
AIR/CABLE MODE SELECTION
The Air/Cable menu option is set to the “Air” mode at the factory so that you can receive
the over-the-air broadcast signal. If you want to receive the Cable signal through the
antenna input terminal, this menu option must be switch to the “Cable” (Cable TV) mode.
Please refer to page 12 of this manual for the details of the menu.
STOP
FOR QUESTIONS OR TECHNICAL SUPPORT
Please call:
Please do not return this TV to the store.
1-800-295-7966
Contents
-1-
Safety and warnings...................................................................................... 2-3
Introduction................................................................................... ..............4
Installation...................................................................................................5-8
.................................................................................................. 9
Remote Control............................................................................ ...............10
Operation.....................................................................................................11-14
Trouble Shooting..........................................................................................15
Wall Mount
-2-
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in
accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized
plug. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protected the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Unplug this apparatus during lighting storms or
when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
14) Mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
15) The ventilation should not be impeded by
covering the ventilation openings with items, such
as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to dripping
or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
identical replacement parts.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
WARNING:
The excessive sound pressure from earphones
and headphones can cause hearing loss.
WARNING:
-3-
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
SAFETY AND WARNINGS
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:515*320mm(不包括底座）
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-4-
INTRODUCTION
Main features Accessories
1366 x 768 native resolution for HD performance
High brightness provides a vivid and brilliant picture
Deep Black and Bright White with high contrast
3 HDMI® inputs for true digital connections
48” wide screen with LED backlight
Integrated ATSC TV tuner for HDTV broadcast reception
VGA port for connection to PC
Specifications
Resolution
Aspect Ratio
TV System
Video Signal System
Receiving Channel
Input Power Voltage
Maximum Power Consumption
Component Video/Composit Video Input
Viewing Picture Size (diagonal)
Audio Output Power (THD 7%)
2 x 10W
Side High-Definition Multimedia Interface (HDMI) Input x 3
x 1
1366x768
16:9
80W
NTSC/PAL
Cable: 1-135/Air: 2-69 (ATV & DTV)
48 inches
AC 100-240V 50/60Hz
ATSC Digital system and NTSC Analog system
Analog RGB (VGA) Input x 1
Audio Input x 2
Headphone Output
x 1
x 1
Digital Audio Output (Coaxial)
USB Port x 1
User's Manual ..................................... 1
Sttand Installation Guide ..................... 1
Warranty Card ..................................... 1
Remote Control ................................... 1
Batteries (AAA) for Remote Control ..... 2
Power Cable ........................................ 1
Stand Support ...................................... 2
Stand Base ........................................... 1
Screws (M4 x 8) ................................... 8
INSTALLATION
KEYBOARD
-5-
Front panel
REAR Connections
All the terminals are(from left to right):AC Power Socket, RF, COAXIAL, AUDIO INPUT, HDMI1
Note: AV and YPbPr share one audio channel.
SIDE Connections
All the terminals are (from left to right):
HDMI2, VGA, PC AUDIO, HDMI3, Headphone
Note:
AV and Y share the same channel.
, AV/YPbPr, USB.
When the HDMI port detects the DVI signal, the DVI audio signal is through the PC Audio
Output Jack.
AC-INPUT
100-240V~50/60Hz R F L R HDMI1
COAXIAL
USBAV/Y Pb PrVGA
HDMI2
HDMI3
PC AUDIO HEADPHONE
1: Remote control sensor.
2: Indicator LED:
BLUE POWER ON.
RED STAND BY.
3: Key board.
1．SOURCE：
Display the input source menu.In
MENU mode,press“SOURCE”to
confirm the selected item.
2．MENU：
Display main MENU.
3．CH+/CH-
In TV mode，press“CH+”or“CH-”
to change the channel up and down.
In MENU mode, press “CH+”or
“CH-”to select items.
4．VOL+/VOL-
Adjust sound level.
In MENU mode, press“VOL+”or“
VOL-”to adjust the item that you selected.
5. STANDBY
Press this button to turn the unit ON from
STANDBY mode.
Press it again to turn the set back to
STANDBY.
ANTENNA
INSTALLATION
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
STEPS:
PC
Before starting the connections, make sure that the
power of both the TV and the computer must be OFF.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
This sequence is very important.
-6-
USBAV/ Y Pb PrVGA
HDMI2
HDMI3
PC AUDIO HEADPHONE
PC
-7-
INSTALLATION
PRESET MODE
1
2
3
4
5
640*480
800*600
1024*768
1280*1024
60
60
60
60
31.47
37.88
48.36
63.98
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
1366*768 60 47.71
INSTALLATION
-8-
AV EQUIPMENT
Yellow (video)
White(audio L)
Red(audio R or Pr)
Y
W
R
W R
GBR
Blue(Pb)
Green(Y)
B
G
VIDEO EQUIPMENT with YPbPr
WR
GBR
WR
W R
Video Equipments: VCR, Multi Disc Player, DVD Player, Camcorder, Video Game, etc.
Video format that YPbPr supports: 480i, 576i, 480p, 720p, 1080i
TO AUDIO OUTPUTS
VIDEO EQUIPMIENT
TO VIDEO
OUTPUTS
You can use the input terminals on TV set rear as follows.
HDMI
AC-INPUT
100-240V~50/60Hz R F L R HDMI1COAXIAL
USBAV/Y Pb PrVGA
HDMI2
HDMI3
PC AUDIO HEADPHONE
Wall Mount
Dimensions for Mounting Hole Pattern
A wall mount kit (purchased separately) would allow you to mount your Quasar
TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. is not responsible for any damagQuasar e to the product or injury to
yourself or others resulting from the wall-mounting.
- This TV is compatible with a 200mm x 100mm mounting hole pattern.Quasar
- Do not mount your TV at more than a 15 degree tilt.Quasar
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
- screws are required for installing the wall mount bracket to 4 pcs of type M4
your TV. Do not use screws that are longer than 10 mm. Screws that Quasar
are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. is not liable for these kinds of Quasar
incidents.
Instruction for Wall Mount
-9-
200
100 100
200
Indice
Altri manuali Quasar TV
Quasar
Quasar SR5143B - 51" PROJECTION TV Manuale utente
Quasar
Quasar SP-2022D Manuale utente
Quasar
Quasar SP-2725 Manuale utente
Quasar
Quasar SQ3204 Manuale utente
Quasar
Quasar SP-2731W Manuale utente
Quasar
Quasar SP-3233 Manuale utente
Quasar
Quasar SP-2725F Manuale utente
Quasar
Quasar SR-5133 Manuale utente
Quasar
Quasar SP2722A - 27" COLOR TV Manuale utente
Quasar
Quasar SP-3235 Manuale utente
