Quick BTQ Series Manuale utente

REV 003A

BTQ Series

BTQ 110

BTQ 125

BTQ 140

BTQ 185

BTQ 250

BTQ 300

SINGLE AND DOUBLE PROPELLER - ELECTRIC MOTOR

EN - INSTALLATION AND USER'S MANUAL

BTQ Series EN

INDEX

QUICK BTQSERIES INSTALLATION AND USER’S MANUAL - REV003A

1 - Information about the product 5

1.0 - Technical Data 5

2 - Supply and equipment 7

2.0 - Standard supply and material included in the package 7

2.1 - Tools required for installation 7

2.2 - Recommended Quick®accessories not included 7

3 - Introduction 7

3.0 - Important notes 7

3.1 - Precautions 8

3.2- Precautions for the installer 8

3.3 - Installation requirements 8

4 - Installation 9

4.0 - Propellers 9

4.1 - Tunnel 10

4.2 - Thruster 11

4.3 - BTQ 110/125 Gearleg and motor support flange 12

4.3.0 - BTQ110/125 Propeller assembly 12

4.4 - BTQ 140/185/250/300 Gearleg and motor support flange 13

4.4.0 - BTQ140/185/250/300 Single propeller/double propeller assembly 13

5 - Wiring diagram 14

5.0 - BTQ110 basic system 14

5.1 - BTQ125 basic system 14

5.2 - BTQ140/185/250/300 basic system 15

6 - Cautions & Use 16

6.0 - Important cautions 16

6.1 - Thruster use 16

7 - Maintenance 17

7.0 - Single/double propeller maintenance 17

8 - Product disposal 17

8.0 - Product disposal 17

9 - Spare parts 18

9.0 - BTQ110/125 18

9.1 - BTQ140/185 19

9.2 - BTQ250/300 20

10 - Dimensions 22

BTQ Series EN

QUICK BTQSeries INSTALLATION AND USER’S MANUAL - REV003A

1.0 - Technical Data

MODELS BTQ 1102512 BTQ 1253012 BTQ 1254012 BTQ 1403012 BTQ 1404012

Propeller type Single (technopolymer)

Tunnel Ø 110 mm

(4” 21/64)

125 mm

(5”)

125 mm

(5”)

140 mm

(5” 33/64)

140 mm

(5” 33/64)

Motor power 1.3 kW 1.5 kW 2.2 kW 1.5 kW 2.2 kW

Voltage 12 V 12 V 12 V 12 V 12 V

Fuse 130 A CNL DIN 225 A CNL DIN 325 A CNL DIN 150 A CNL DIN 225 A CNL DIN

Thrust 25 kgf (55.1 lb) 30 kgf (66.1 lb) 40 kgf (88.2 lb) 30 kgf (66.1 lb) 40 kgf (88.2 lb)

Weight 9.3 kg (20.5 lb) 10.0 kg (22.0 lb) 10.9 kg (24.0 lb) 11.3 kg (24.9 lb) 12.2 kg (26.8 lb)

Tube thickness limit value min. 3 mm - max 6.5 mm (min. 1/8” - max 1/4”) min. 4.5 mm - max 6.5 mm

(min. 11/64” - max 1/4”)

Cable

cross-section

Recommended

(*)

(**)

L < 5 m 35 mm2

(AWG 2)

50 mm2

(AWG 1)

70 mm2

(AWG 2/0)

35 mm2

(AWG 2)

50 mm2

(AWG 1)

5.1 < L < 10 m 50 mm2

(AWG 1)

70 mm2

(AWG 2/0)

2 x 50 mm2

(2 x AWG 1)

50 mm2

(AWG 1)

70 mm2

(AWG 2/0)

10.1 < L < 20 m 70 mm2

(AWG 2/0)

95 mm2

(AWG 3/0)

2 x 70 mm2

(2 x AWG 2/0)

70 mm2

(AWG 2/0)

95 mm2

(AWG 3/0)

MODELS BTQ 1805512 BTQ 1805524 BTQ 1807512 BTQ 1807524 BTQ 1809524 BTQ 1809524

Propeller type Single (technopolymer)

Tunnel Ø 185 mm

(7” 18/64)

185 mm

(7” 18/64)

185 mm

(7” 18/64)

185 mm

(7” 18/64)

185 mm

(7” 18/64)

185 mm

(7” 18/64)

Motor power 3.0 kW 3.0 kW 4.0 kW 4.0 kW 6.0 kW 6.0 kW

Voltage 12 V 24 V 12 V 24 V 12 V 24 V

Fuse 250 A CNL DIN 150 A CNL DIN 350 A CNL DIN 250 A CNL DIN 350 A CNL DIN 250 A CNL DIN

Thrust 55 kgf (121.2 lb) 55 kgf (121.2 lb) 75 kgf (165.3 lb) 75 kgf (165.3 lb) 95 kgf (209.4 lb) 95 kgf (209.4 lb)

Weight 16.7 kg (36.8 lb) 16.9 kg (37.2 lb) 17.0 kg 37.5 lb 19.6 kg 43.2 lb 26.6 kg (58.6 lb) 24.2 kg (53.3 lb)

Tube thickness limit value min. 4.5 mm - max 6.5 mm

(min. 11/64” - max 1/4”)

Cable

cross-section

Recommended

(*)

(**)

L < 5 m 50 mm2

(AWG 1)

35 mm2

(AWG 2)

70 mm2

(AWG 2/0)

50 mm2

(AWG 1)

2 x 50 mm2

(2 x AWG 1)

50 mm2

(AWG 1)

5.1 < L < 10 m 70 mm2

(AWG 2/0)

50 mm2

(AWG 1)

2 x 50 mm2

(2 x AWG 1)

70 mm2

(AWG 2/0)

2 x 70 mm2

(2 x AWG 2/0)

70 mm2

(AWG 2/0)

10.1 < L < 20 m 95 mm2

(AWG 3/0)

70 mm2

(AWG 2/0)

2 x 70 mm2

(2 x AWG 2/0)

95 mm2

(AWG 3/0)

2 x 95 mm2

(2 x AWG 3/0)

95 mm2

(AWG 3/0)

(*) L = positive cable + negative cable

(**) Other solutions are allowed, provided that they are supported by the connecting terminals. Respect minimum area indicated.

READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USING THE PRODUCT. IF IN DOUBT, CONTACT YOUR QUICK®

DEALER.

QUICK®RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT

PRIOR NOTICE. IN CASE OF DISCORDANCE OR ERRORS IN TRANSLATION BETWEEN THE TRANSLATED VERSION AND THE ORIGINAL TEXT IN THE ITALIAN

LANGUAGE, REFERENCE WILL BE MADE TO THE ITALIAN TEXT.

1 - Information about the product

BTQ Series

QUICK BTQSeries INSTALLATION AND USER’S MANUAL - REV003A

1 - Information about the product

MODELS BTQ 1806512 BTQ 1806524 BTQ 1808512 BTQ 1808524 BTQ 1810512 BTQ 1810524

Propeller type 2 Counter rotating (technopolymer)

Tunnel Ø 185 mm

(7” 18/64)

185 mm

(7” 18/64)

185 mm

(7” 18/64)

185 mm

(7” 18/64)

185 mm

(7” 18/64)

185 mm

(7” 18/64)

Motor power 3.3 kW 3.3 kW 4.3 kW 4.3 kW 6.3 kW 6.3 kW

Voltage 12 V 24 V 12 V 24 V 12 V 24 V

Fuse 275 A CNL DIN 175 A CNL DIN 400 A CNL DIN 275 A CNL DIN 400 A CNL DIN 275 A CNL DIN

Thrust 65 kgf (55.1 lb) 65 kgf (55.1 lb) 85 Kgf (187.4 lb) 85 Kgf (187.4 lb) 105 Kgf (231.5 lb)105 Kgf (231.5 lb)

Weight 17.6 kg (38.8 lb) 17.8 Kg (39.2 lb) 17.9 kg (39.4 lb) 20.5 kg (45.2 lb) 27.5 kg (60.6 lb) 25.1 Kg(55.3 lb)

Tube thickness limit value min. 4.5 mm - max 6.5 mm (min. 11/64” - max 1/4”)

Cable

cross-section

Recommended

(*)

(**)

L < 5 m 70 mm2

(AWG 2/0)

50 mm2

(AWG 1)

2 x 50 mm2

(2 x AWG 1)

70 mm2

(AWG 2/0)

2 x 70 mm2

(2 x AWG 2/0)

70 mm2

(AWG 2/0)

5.1 < L < 10 m 2 x 50 mm2

(2 x AWG 1)

70 mm2

(AWG 2/0)

2 x 70 mm2

(2 x AWG 2/0)

2 x 50 mm2

(2 x AWG 1)

2 x 95 mm2

(2 x AWG 3/0)

2 x 50 mm2

(2 x AWG 1)

10.1 < L < 20 m 2 x 70 mm2

(2 x AWG 2/0)

95 mm2

(AWG 3/0)

2 x 95 mm2

(2 x AWG 3/0)

2 x 70 mm2

(2 x AWG 2/0)

2 x 120 mm2

(2 x AWG 4/0)

2 x 70 mm2

(2 x AWG 2/0)

MODELS BTQ 2512012 BTQ 2512024 BTQ2514024 BTQ 2524024

Propeller type 2 Counter rotating (technopolymer)

Tunnel Ø 250 mm (9” 27/32 in) 250 mm (9” 27/32 in) 250 mm (9” 27/32 in) 250 mm (9” 27/32 in)

Motor power 6.5 Kw 6.5 Kw 8 Kw 10 Kw

Voltage 12 V 24 V 24 V 24 V

Fuse 500 A CNL DIN 275 A CNL DIN 275 A CNL DIN 500 A CNL DIN

Thrust 120 kgf (265 lb) 120 kgf (265 lb) 140 kgf (308 lb) 240 kgf (529 lb)

Weight 35.5 Kg (78.2 lb) 34.2 Kg (75.4 lb) 34.2 Kg (75.4 lb) 49.1 Kg (108.2 lb)

Tube thickness limit value min. 6.5 mm - max 11 mm (min. 1/4” - max 7/16”)

Cable

cross-section

Recommended

(*)

(**)

L < 5 m 2 x 70 mm2

(2 x AWG 2/0)

70 mm2

(AWG 2/0)

70 mm2

(AWG 2/0)

2 x 50 mm2

(2 x AWG 1)

5.1 < L < 10 m 2 x 95 mm2

(2 x AWG 3/0)

2 x 50 mm2

(2 x AWG 1)

2 x 50 mm2

(2 x AWG 1)

2 x 70 mm2

(2 x AWG 2/0)

10.1 < L < 20 m 2 x 120 mm2

(2 x AWG 4/0)

2 x 70 mm2

(2 x AWG 2/0)

2 x 70 mm2

(2 x AWG 2/0)

2 x 95 mm2

(2 x AWG 3/0)

MODELS BTQ 3025024 BTQ 3027024 BTQ 3030048 BTQ 3030048 NYLON

Propeller type 2 Counter rotating (technopolymer) 2 Counter rotating

(nibral)

2 Counter rotating

(technopolymer)

Tunnel Ø 300 mm (11” 13/16 in) 300 mm (11” 13/16 in) 300 mm (11” 13/16 in) 300 mm (11” 13/16 in)

Motor power 10 Kw 12 Kw 15 Kw 15 Kw

Voltage 24 V 24 V 48 V 48 V

Fuse 400 A CNL DIN 500 A CNL DIN 500 A CNL DIN 500 A CNL DIN

Thrust 250 kgf (551 lb) 270 kgf (595 lb) 300 kgf (661 lb) 300 kgf (661 lb)

Weight 46.7 Kg (102.9 lb) 55.9 Kg (123.2 lb) 66.7 kg (147 lb) 60 kg (132 lb)

Tube thickness limit value min. 9.5 mm - max 13.5 mm (min. 3/8” - max 17/32”)

Cable

cross-section

Recommended

(*)

(**)

L < 5 m 70 mm2

(AWG 2/0)

95 mm2

(AWG 3/0)

95 mm2

(AWG 3/0)

95 mm2

(AWG 3/0)

5.1 < L < 10 m 2 x 50 mm2

(2 x AWG 1)

2 x 95 mm2

(2 x AWG 3/0)

2 x 70 mm2

(AWG 2/0)

2 x 70 mm2

(AWG 2/0)

10.1 < L < 20 m 2 x 95 mm2

(2 x AWG 3/0)

2 x 120 mm2

(2 x AWG 4/0)

2 x 95 mm2

(2 x AWG 3/0)

2 x 95 mm2

(2 x AWG 3/0)

(*) L = positive cable + negative cable

(**) Other solutions are allowed, provided that they are supported by the connecting terminals. Respect minimum area indicated.

BTQ Series EN

QUICK BTQSeries INSTALLATION AND USER’S MANUAL - REV003A

2.0 - Standard supply and material included in the package

• Thruster

• Drilling template

• Gasket

• O-ring

• Installation and use manual

• Conditions of warranty

2.1 - Tools required for installation

BTQ110/125 • Drill and drill bits Ø 7 mm (9/32”)

• Hollow mill Ø 25 mm (63/64”)

• Male hex.wrenches: 4 mm, 5 mm and 6 mm

• Fork wrench: 10 mm

BTQ140 • Drill and drill bits Ø 7 mm (9/32”)

• Hollow mill Ø 27 mm (1” 1/16)

• Male hex.wrenches: 4 mm, 5 mm and 6 mm

• Fork wrench: 17 mm

BTQ185 • Drill and drill bits Ø 9 mm (3/8”)

• Hollow mill Ø 35 mm (1” 3/8)

• Male hex.wrenches: 5 mm, 6 mm and 8 mm

• Fork wrench: 19 mm

BTQ250 • Drill and drill bits Ø 11 mm (7/16”)

• Hollow mill Ø 46 mm (1” 13/16)

• B00 Hollow mill Ø 82 mm (3” 7/32)

• C00 Hollow mill Ø 120 mm (4” 23/32)

• Male hex.wrenches: 4 mm, 5 mm, 8 mm and 10 mm

• Fork wrench: 24 mm

BTQ300 • Drill and drill bits Ø 15 mm (19/32”)

• Hollow mill Ø 53 mm (2” 3/32)

• Male hex.wrenches: 4 mm, 5 mm, 8 mm and 12 mm

• Fork wrench: 27 mm

2.2 - Recommended Quick®accessories not included

• TCD 2022 remote control

• TCD 2042 remote control

• TCD 2044 remote control

• TCD 2062 remote control (with integrated line switch)

• TSC 2000 integrated line switch control

• TMS line switch

• THF3 - THF6 fuse holder

2 - Supply and equipment

3.0 - Important notes

BEFORE USING THE PRODUCT, PLEASE READ THIS USER’S MANUAL CAREFULLY. IF IN DOUBT, PLEASE CONSULT YOUR QUICK® DEALER.

This manual features Warning and/or Caution symbols that are important for safety.

Please follow the instructions provided.

Warning symbol for dangerous

situations.

Caution symbol to prevent direct or

indirect damage to the product.

This manual provides boat manufacturers and nautical equipment installers with instructions on how to assemble the specied

Quick®product and operate it correctly.

BTQ Series

QUICK BTQSeries INSTALLATION AND USER’S MANUAL - REV003A

3.1 - Precautions

Quick®Thrusters have been designed and constructed only for nautical use.

• Do not use these products for any other type of operation.

• Quick®shall not be held liable for direct or indirect damage caused by improper use of the product.

• The product is not designed to support loads generated in particular atmospheric conditions (storms).

• Operate the product from a position where it is possible to supervise the work area.

• Always deactivate the product when not being used.

• For improved safety, we recommend installing at least two controls to operate the product in case one is damaged.

• The installer shall bear full responsibility for any problems caused by defective installation of the tunnel.

• This equipment is not intended for use by people (including children) with reduced physical, sensory or mental capabilities.

• Do not install the electric motor near easily inammable objects.

The terminals must be properly tightened.

Secure / hold the inner nut when tightening

MINIMUM TIGHTENING TORQUE IS 11 Nm

3.2- Precautions for the installer

CARRY OUT THE INSTALLATION IN GOOD LIGHTING CONDITIONS.

It is advisable to wear suitable clothing and personal protective equipment (PPE).

The product is not suitable for installation in potentially explosive environments and/or atmospheres.

Installation and subsequent inspection or repair work must only be carried out by qualied personnel.

CARRY OUT INSTALLATION/MAINTENANCE WORK MAKING SURE THAT THE PRODUCT IS DISCONNECTED

FROM THE ELECTRICAL SYSTEM.

Quick®accepts no responsibility for inadequate connection of users to the electrical system and inadequate safety of

the electrical system.

3.3 - Installation requirements

We recommend you entrust preparation and positioning of the tunnel in the hull to a skilled professional.

These are generic instructions and do not give details of the preparatory operations for installing the thruster, since this is the

competence of the boatyard. The installer shall bear full responsibility for any problems caused by defective installation.

Although all the components and mechanical moving parts are of high quality, the correct installation of the driving unit is an

essential basis for the safe and effective use of the boat as well as the driving unit itself.

The installation of such a unit is an operation that requires experience as well as technical skills. It is recommended that the

installation be carried out by competent personnel and that the manufacturer or naval architects be consulted to fully assess

the scope of the work.

3 - Introduction

BTQ Series EN

QUICK BTQSeries INSTALLATION AND USER’S MANUAL - REV003A

4 - Installation

4.0 - Propellers

The position of the tunnel will depend on the interior

and exterior shape of the boat’s bow.

• FIG. 1 In order to avoid cavitation in the propeller, the

tunnel should be placed as deep as possible. The optimum

tunnel position will be at least 0.75 times the diameter of

the tunnel from the waterline.

BARYCENTRE

FIG. 2

• FIG. 2 The lever effect in the boat is proportional to

the increase of the distance (L1 and L2) between the

barycentre and the position of the tunnel A and B.

• FIG. 3 For greater lever effect prefer position B.

SINGLE PROPELLER DOUBLE PROPELLER TUNNEL LENGTH

MINIMUM 1.5 TIMES

TUNNEL Ø

MAXIMUM 6 TIMES

TUNNEL Ø

An increase in the length of the tunnel increases the effect of the loss of charge, decreasing the nominal driving

force.

• For a proper use of the thruster, we recommend a length equal to 1.5 to 4 times the tunnel diameter. To limit losing charge, a

ratio of up to 6 times the diameter can be tolerated.

Minimum 0.75

times tunnel Ø

FIG. 1

BTQ Series

QUICK BTQSeries INSTALLATION AND USER’S MANUAL - REV003A

4 - Installation

4.1 - Tunnel

• The rounded ends of the tunnel limit the creation of turbulence and cavitation, improving performance of the propeller thrust

and reducing noise levels to a minimum.

SINGLE PROPELLER

DOUBLE PROPELLER

• The force produced by the ow of the water when the boat is moving produces resistance on the rear face of the tunnel,

which is an area exposed frontally to the water ow. To limit this phenomenon, prepare an indentation in the rear part of the

tunnel. The indentation will depend on the shape of the hull. Otherwise, create a deector on the front part of the tunnel.

• If the tunnel is near the waterline, it is advisable to t a grating at the end of the tube. The

grating must have as large a vertical mesh as possible to avoid contrasting the propeller thrust.

The vertical mesh prevents the entry of most of the oating objects.

Altri manuali per BTQ Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Quick Attrezzatura nautica

Manuali Attrezzatura nautica popolari di altre marche

Ideal Windlass

Ideal Windlass CWM Guida

Access

Access BIMINI Manuale utente

Floe

Floe VSD 6000 Manuale utente

Faun

Faun C40 Trackway Manuale utente

Exalto

Exalto 240BS Manuale utente

Hobie

Hobie Mirage 360 Manuale utente

Dowco

Dowco V322 CC - 2019 Manuale utente

Humphree

Humphree HCS-5 Manuale utente

Vetus

Vetus BOW4512D Scheda tecnica

Dock Doctors

Dock Doctors SLIDING BOARDING STEP Manuale utente

Mastervolt

Mastervolt Mass Combi 12/2000-100 Istruzioni operative originali

Zattini Group

Zattini Group bamar BOXTRON E14S Guida utente

SeaView

SeaView PM5-FMD-8 Manuale utente

Vetus

Vetus HTANK Manuale utente

Grammer

Grammer AVENTO MSG 65/511 Istruzioni operative

Furuno

Furuno TZTL12F Manuale utente

Harken

Harken 944 Manuale utente

ShoreLand'r

ShoreLand'r DUB 2314 Manuale utente