Quick 959D+ Manuale utente
QUICK 959D+
SMD REWORK STATION
Instruction Manual
Thank you for purchasing our products. Please keep the instruction
manual properly for future reference.
Contents
1. Safety Instruction.........................................................................................................1
2. Product Introduction....................................................................................................2
3. Product Features.........................................................................................................2
4. Product Specifications................................................................................................3
5. Function Descriptions.................................................................................................3
5.1Dimensions....................................................................................................... 3
5.2 Part Descriptions............................................................................................ 4
5.3 Button Descriptions........................................................................................ 5
5.4 Main Menu....................................................................................................... 5
6. Installation and Connection.......................................................................................6
6.1 Installation........................................................................................................6
6.2 Connection.......................................................................................................6
7. Operation...................................................................................................................... 7
8. Password Setup.......................................................................................................... 7
9. Parameter Setup......................................................................................................... 8
10. New Password Setup...............................................................................................9
11. Temperature Calibration...........................................................................................9
12. Replacement of the Heater...................................................................................10
12.1 Steps of removing the Heater..................................................................10
12.2 Steps of replacing the Heater.................................................................. 10
13. Troubleshooting.......................................................................................................11
14. Nozzles.....................................................................................................................12
15. Consumable List..................................................................................................... 13
1
1. Safety Instruction
CAUTION
During the installation and use of the product, you need to observe the electrical
safety regulation of location.
Please power off the product during disassembly.
If the product is not working properly, please contact the supplier or manufacture,
do not disassemble or modify without notice. We will not be liable for any problems
caused by unauthorized maintenance or modification of the product.
WARNING
Products should be used away from magnetic field.
Do not place the product where the surface is vibrated or subject to shocks.
Do not install the product where it maybe wet.
Do not use the product near flammable materials.
The product should be keep ventilation during operation. Turn off the product when
resting or after completion..
Do not use the product when it is damaged, inspection and maintenance regularly.
The handle is placed on the holder, the system will sleep automatically when the
temperature is less than 100 ℃.
Please unplug the power cable when the product is not used for a long time.
2
2. Product Introduction
This product is suitable for de-soldering and soldering, such as SMD, SOP, SOG. Heat
shrinkage, drying, paint removal, adhesive removal, thawing, preheating & disinfection
are available. Adjustable air volume is suitable for small or large air volume heater.
3. Product Features
Closed loop sensor, microcomputer control temperature, with high power and rapid
temperature heat.
Air volume adjustable, digital display and easy to adjust temperature.
There is a magnetic sensor in handle. The handle is placed on the holder, the system
will sleep automatically. And when picked up from holder, it will enter work mode
quickly.
Cooling fan extends heater lifetime.
Compact design.
3
4. Product Specifications
Product type
959D+
Display
LCD
Power
500W(Max）
580W（Max）
Input voltage
110V AC
220V AC
Temperature range
100～500℃
Air volume
1～100 Level (Adjustable）
Airflow
40L/min（Max）
Dimensions(L*W*H）
110*180*151mm
Weight
About 1.6 Kg
5. Function Descriptions
5.1Dimensions
Unit: mm
4
5.2 Part Descriptions
5
5.3 Button Descriptions
Button
Function Descriptions
CH1~CH3
1.Click coordinate button to select Channel numbers.
2.Press and hold the Channel button to store the airflow and
temperature of the current Channel.
▲/▼
1.Temperature regulation
2.Press and hold ▲&▼ buttons simultaneously to enter the
temperature calibration menu.
5.4 Main Menu
Icon
Descriptions
Air volume
CH0
Temporary channel
COOL
Cooling status
6
6. Installation and Connection
6.1 Installation
The handle holder must be installed when the product is used for the first time, as shown
below.
1) Remove two screws on the left side of the holder.
2) Place the mounting hole of the handle holder on the two screw holes on the product and
install two screws and tighten them.
3) Install the handle holder and put the handle on the holder, then check whether they are
well fit.
Note: The handle holder can be installed on the left or right side of the product
according to actual needs.
6.2 Connection
Connect the AC power supply, and power on it to start work.
7
7. Operation
Air volume
Adjust the knob clockwise to increase air volume, and otherwise to decrease; do reverse
operations and the air volume will be decreased. Adjust the knob for a large scope and the
air volume can be quickly increased or decreased.
Temperature
Click the "▲" or "▼" button to increase or decrease the temperature by 1℃, and hold
down the "▲" or "▼" button to rapidly increase or decrease the temperature.
Channel
Click CH1, CH2, CH3 to select Channel 1, Channel 2, Channel 3 respectively. Long press
the Channel button to store the parameters of the current Channel.
Sleeping
Place the handle on the holder to cool. The station will enter the sleeping mode when the
temperature is less than 100℃.
8. Password Setup
The initial password is “000”. The temperature can be set under this state. If you want to
limit temperature adjustment, the password must be changed.
Enter password setting mode
1) Turn off the station press the “▲” and “▼” keys at the same time, and then turn on the
station
2) Press the “▲” and “▼” keys, and you will hear a sound “Di” before C is displayed,
then a symbol “--” appears.
8
3) Enter the right password to enter the parameter setting menu.
Enter the initial password
1) The window displays “--” and the left hundred-digit flashes. At this time, the
hundred-digit number can be adjusted (you can enter the initial password）.
2) Input the initial password: Adjust the middle knob to change the hundred-digit number;
press “▲” key to move the digits and then ten-digit number began to flash, indicating that
it can be set in the same way as before. After the single-digit number is set, hold down the
“▲” and “▼” keys at the same time to confirm it.
3) If the first password is wrong: then directly enter the second password, and
the input method is same as the first time. (There are two chances of password input. If the
first password input is wrong, you can directly enter the second input.）
4) If the password entered twice is wrong: the window will show “ERR”, and then
directly enter the main interface.
5) If the first or the second password is correct: then directly enter the parameter
settings, and the window shows “-1-”.
9. Parameter Setup
1) The password is entered correctly to access the parameter menu, and the sequence of
changes is shown in the following figure.
2) Click “▲” or “▼” button, select parameter menu-1, and return to the main interface
directly; after selecting parameter menu-2, press “▲” and “▼” buttons at the same time
to enter the new password setting.
Indice
Altri manuali Quick Stazione di rilavorazione
