Quilt EZ Prodigy Manuale utente
How to Attach
Butler Robotics to a
Prodigy
//
Bag # Contents Picture
39 10” & 7” Universal Display Brack-
et
28 Motor Pulley Cover
10 Cables
26 Stylus, zip ties, anchor
Bag # Contents Picture
Carriage bracket, Belt bracket, eye
bolt
Motor box bracket, screws
X brackets, eye bolts, T nut screws
Install Belt Bracket
Attach the black belt
bracket to the carriage
bracket using the
provided screws.
1
Page 4
Attach the carriage
bracket to the frame as
indicated at right using
the provided screws.
1
Attach the Front Carriage Bracket
Winged-screw Screw
Screws
Install Front Idle Bracket
Attach Carriage Brackets Page 5
Install a front idle
bracket using the
provided screws.
1
Page 6 Install Motor Box Bracket
Attach Motor Bracket
to top of motor box
with provided screws.
Attach motor box to
rear of machine with
provided screws.
1
Rear Motor Box Bracket
Screws
Page 7
Install White Belt
Install White Belt
Slide each pair of T
Nuts into the grooves
at the back corners of
the frame.
1
Use belt clamps to
attach end of white belt
to an eye bolt.
Install the eye bolt into
the Belt Bracket and
secure with nut.
3
For more on how
to use belt clamps,
see Appendix A on
pg 11.
T Nut
Attach Belt Bracket
to T-nuts and tighten
securely using provided
screws.
2
Page 8 Install White Belt
Follow steps 1-3 to
secure remaining end
of white belt to the
other side of the frame.
Make sure that the
teeth side of the belt
are facing the motor
box pulley.
4
White
Belt
Page 9
Install Black Belt
Using the belt clamps,
attach one end of
the black belt to the
carriage bracket.
Wrap the toothed
side of the black belt
(highlighted at right)
around both the Idle
and Motor Box pulleys,
then use belt clamps to
attach the remaining
end of the belt to the
carriage bracket.
Ensure that the black
belt travels behind
the carriage bracket
(shown at right).
(Bag # 35)
1
Install Black Belt
For more on how
to use belt clamps,
see Appendix A on
pg 11.
Black
Belt
Page 10 Install Display
Install Display
Insert SD card into
display.
Install display bracket
onto the machine
using the provided
screws.
Attach display to
display bracket with
provided screws.
1
2Plug one end of the
display cable the black
motor box remote port.
Plug the remaining end
into display port found
on the bottom edge of
the display.
Display
Bracket
Indice
Altri manuali Quilt EZ Accessori per macchine da cucire
