Quooker PRO7 Manuale utente
Installation guide PRO7
Before installing read this guide rst
Introduction
The operation of the Quooker PRO7
The Quooker system consists of a small tank under the sink which is connected to the Nordic
single tap, the Fusion tap or the Flex tap. The tank is vacuum-insulated and is connected to the
cold water supply via an inlet combination. Inside the tank the water is heated electrically to
approx. 110°C and is kept at this temperature. When boiling water is drawn o, cold water ows into
the tank at the same time and is heated automatically. If the entire content of boiling water is used
in one go, the heating-up time is ca. 15 minutes (PRO7).
Before the water leaves the tank it is puried by the HiTAC® water lter (High Temperature
Activated Carbon). The Nordic single tap, the Fusion tap and the Flex tap are insulated and are
tted with a childproof push-and-turn handle (see ‘Tips for use’ for instructions). The Nordic single
tap is also height-adjustable.
Despite all the safety features incorporated in the product, anyone using the Quooker system
must keep in mind the risks of using boiling water in general. Incorrect use can lead to injury.
Therefore always read the manual carefully before use.
Installation, maintenance and warranty
The Quooker can be installed in almost any location provided there is sucient space for the tank
as well as a 13 amp socket, water supply and waste.
The Quooker tank must be tted in an upright position. If the tank is to be tted in a cabinet with
drawers, an optional bracket can be purchased to suspend the tank from the cabinet wall.
The HiTAC® lter should be changed once every ve years. If you live in a hard water area,
lime scale will collect at the bottom of the tank and will need to be cleaned out by one of our
engineers approximately once a year depending on usage and the quality of the water in your
area. Alternatively, you can install a suitable descaling system. This system must not reduce the pH
level of the water below 7 or remove all the minerals from the water (reverse osmosis) as this can
be harmful to the tank and would void the warranty. Suitable descaling systems are also available
directly from Quooker as an optional extra.
The warranty period is two years and covers supply of parts only. It does not cover labour costs or
issues resulting from insucient lime scale maintenance.
Users
The Quooker tap can be used by children above the age of eight and people with diminished
physical, sensory or intellectual abilities provided they are supervised or have been instructed
on the safe use of the device. Inform people who are unfamiliar with the Quooker system about
safe use and the possible dangers associated with the use of the boiling-water tap. Please note:
incorrect use may result in injury. Prevent children from using the tap as a toy and do not allow
children to clean or maintain the product unsupervised. Keep the plug out of reach of small
children.
The Quooker system is suitable for household use and commercial use such as in sta kitchens at
shops, oces, farms and other business premises and for use by visitors at hotels, motels, bed &
breakfasts and other residential accommodation.
Always follow the installation method described in the manual. Avoid spilling water on the plug.
If defective, the power plug may only be replaced by a qualied technician. Water may drip from
the pressure relief valve. This is normal. Always leave the grey funnel of the pressure relief valve
open. The pressure relief valve must be serviced regularly to prevent lime scale build-up and to
check that the valve has not blocked up. Make sure you let the tank cool o adequately before
disconnecting it. The fastest way to do this is as follows: turn o the Quooker, but leave the plug in
the socket. Then open the boiling-water tap and turn it o once the water is cold. You can nd a
more detailed explanation for disconnecting the tank in chapter F.
Tips for use and the installation manual can also be found on our website: www.quooker.ae
Declaration of conformity
Quooker Nederland b.v., Staalstraat 13, 2984 AJ Ridderkerk (The Netherlands) herewith declares,
on our own responsibility, that the product Quooker PRO7 is in accordance with the conditions
of the following directives:
- 2006/95/EC Low voltage Directive
- 2004/108/EC Electromagnetic Compatibility Directive
- 2014/68/EU Pressure Equipment Directive
And are in conformity with the following standards:
EN60335-1:2012 + A11:2014
EN60335-2-15:2002 + A1:2005 + A2:2008 + A11:2012
EN62233:2008
EN55014-1:2006 + A1:2009 + A2:2011
EN55014-2:1997 + A1:2001 + A2:2008
EN61000-3-2:2014; EN61000-3-3:2013; EN61000-4-2:2009; EN61000-4-3:2006
+ A1:2008 + A2:2010; EN61000-4-4:2012; EN61000-4-5:2014; EN61000-4-6:2014;
EN61000-4-11:2004
The Netherlands, Ridderkerk, 12/02/2016
Niels Peteri, Director
Technical specications
Tank PRO7
Voltage 230 V
Wattage* 2900 W
Capacity 7 litres
Heating-up time* 15 minutes
Standby power consumption* 10 W
Tank height 47 cm
Tank diameter 20 cm
Min. mains pressure 200 kPa (2 bar)
Max. mains pressure 600 kPa (6 bar)
Max. working pressure 800 kPa (8 bar)
Mounting bracket optional yes
Safety features - maximum temperature fuse
- pressure relief valve 800 kPa (8 bar)
Water shut-o valve electric
HiTAC® water lter High Temperature Activated Carbon
*These are average values.
Tap Nordic Fusion, Flex
single tap and mixer tap
Tap hole size 32 mm 35 mm
Recomm. temp. mixing water - 60°C
Bezel available yes yes
Contents of the pack
1. - Nordic single tap, packing ring, centring ring, steel ring, brass sink nut and two screws
- or Fusion tap, packing ring, brass xing plate, xing nut, white tap support (for thin work tops)
and two inlet hose screens
- or Flex tap, hoses, bre washer(s), steel washer, screw ring with two screws, coupling with
boiling water hose, white tap support, two inlet hose screens and quick-release tool.
1
Fusion
Flex
Nordic single tap
1
4
2
5
2. PRO7 tank
3. Pressure reducing valve
4. Quooker inlet combination
5. PVC connector, Quooker drill bit, large packing ring and waste hose
COLD
Overview of Nordic single tap installation
It is recommended that you install the Quooker in the following order:
A. Drilling hole
B1. Fitting Nordic single tap
C. Connecting water
D. Connecting waste
E. Connecting tank
Note: Bear in mind that the tank, inlet combination and socket must remain accessible for
servicing.
For an overview of the Fusion tap installation, please refer to the next page and for the Flex tap to
the page after that.
COLD
Wa
rm
C
old
A
C
D
E
B1
Warm
Cold
COLD
B2
A
C
D
E
Overview of Fusion tap installation
It is recommended that you install the Quooker in the following order:
A. Drilling hole
B2.Fitting Fusion tap
C. Connecting water
D. Connecting waste
E. Connecting tank
Note: Bear in mind that the tank, inlet combination and socket must remain accessible for
servicing.
For an overview of the Flex tap installation, please refer to the next page.
Overview of Flex tap installation
It is recommended that you install the Quooker in the following order:
A. Drilling hole
B3.Fitting Flex tap
C. Connecting water
D. Connecting waste
E. Connecting tank
Note: Bear in mind that the tank, inlet combination and socket must remain accessible for
servicing.
COLD
Warm
Cold
A
C
D
E
B3
Indice
Altri manuali Quooker Scaldabagno
