RA SH1 Manuale utente
SH1 / SH1T / SH2 / SH2T
Thank you for purchasing Q.Light product.
Please read this manual carefully before installing this system
for safe and long use of the product.
▪ Aluminum housing product with high durability.
▪ Ensuring high revolving durability by applying a small bearing to
the revolving axis.
▪ RPM : 120-140/Min.(Controllable)
▪ Material : Lens-PC, Body-Diecast AL, Reflector-Heat Resisting
ABS, Protection Cage(Option)-SUS316L
▪ Protection Class : IP56
▪ Standard Body Color : MUNSELL NO. : 7.5BG 7/2
1) SH1 / SH1T
▪ Product Specification
Model Rated
Voltage Current Bulb Weight Color
DC12V 1.170A 12V15W G23 15S 17
DC24V 0.510A 24V15W G23 15S 18 1.22Kg
AC110V 0.145A 12V15W G23 15S 17
SH1
SH1T
(with
Terminal)
AC220V 0.073A 12V15W G23 15S 17 1.61Kg
Red-R
Amber-A
Green-G
Blue-B
*Each weight above mentioned is the net weight of SH1 excluding protection
cage(0.25kg) and terminal box(0.46kg).
▪ External View Drawing
SH1 SH1T
2) SH2/SH2T
▪ Product Specification
Model Rated
Voltage Current Bulb Weight Color
DC12V 1.170A 12V15W G23 15S 17
DC24V 0.510A 24V15W G23 15S 18
1.38Kg
AC110V 0.145A 12V15W G23 15S 17
SH2
SH2T
(with
Terminal)
AC220V 0.073A 12V15W G23 15S 17
1.77Kg
Red-R
Amber-A
Green-G
Blue-B
* Each weight above mentioned is the net weight of SH1 excluding
protection cage(0.29kg) and terminal box(0.46kg).
▪ External View Drawing
SH2 SH2T
This product has a terminal plate inside body(SH1/SH2) or
terminal box(SH1T/SH2T) for wiring.
SH1/SH2 SH1T/SH2T
1) SH1/ SH2
▪ Separate globe ring② and globe③ from the body by loosening
protection cage fastening bolt(M4-4EA)①.
▪ Separate assembling board⑤ by loosening assembling board
fastening bolt(M4 Screw : SH1-2EA, SH2-3EA)④ and make sure
terminal plate⑥.
OPERATING MANUAL
Heavy Duty Bulb Revolving Warning light
ООО “РусАвтоматизация” 454010 Челябинск, Гагарина 5,
русавтоматизация.рф
Россия, тел. 8 800 775 09 57 , +7(351)799 54 26,
тел./факс +7(351)211 64 57
(звонок бесплатный)
,[email protected], www.rusautomation.ru,
2) SH1T / SH2T
Separate terminal box cover⑧ by loosening terminal box cover
fastening bolt(M5-4EA)⑦ and make sure terminal plate⑥.
3) Wiring Power Line
▪ In case of product using AC voltage, connect the line without
polarity(wire color).
▪ In case of product using DC voltage, black line is negative(-).
4) Treating Cable Terminal
▪ Treat the end of power cable by using “O” or “U” type terminal
for safe wiring.
5) Treating Power Entry
Keep the tightness of power entry⑨ by using water-proof
connector(SH1/SH2-flexible connector #16, SH1T/SH2T-15C
nipple is supplied as a standard specification) or cable grand.
This product is water-proof and anti-corrosion type.
But, install with vertical direction at a place or machine where
exists no big vibration and no strong impact as long as possible.
▪ Refer to below drawing and drill necessary mounting holes on
profitable part of the product.
(Make sure PCD from external view drawing.)
▪ Fix the product by using mounting bolt(M8-3EA).
This product has a volume(1) for controlling revolving speed and
voltage selection switch(2) on assembling board. Refer to
following drawing and explanation for right operating.
1) Lens Set Removal
▪ Refer to wiring diagram of previous page and separate globe
ring(protection cage)② and globe③ from the body by loosening
fixing bolt①(M4 bolt 4ea) and make sure voltage selection
switch(2) and speed control volume(1) on assembling board on
above drawing.
2) Revolving Speed Control
▪ The volume(1) for revolving speed control is built-in this
product. Turn it closckwise for increasing revolving speed and
turn it counterclockwise for decreasing revolving speed.
▪ If give excess power to the volume,it can be broken.
Be careful !
3) AC Voltage Selection (AC Voltage Type Product)
▪ One of AC 110V and 220V can be used by using voltage
selection switch(2). The product is originally produced with
220V as standard specification. So,convert to 110V by using
voltage selection switch if power line voltage is 110V.
4) Bulb Change
※ Warning ! Turn off Power
Must turn off power supply and change the bulb after at least
1 minute.
▪ Make sure the rated voltage and wattage of new bulb. If the
voltage of new bulb is higher than that of original bulb, the
self-life of product can be reduced and can cause damage on
lens and reflector. Therefore, please use same bulb as original
one which has same rated voltage and wattage or lower one.
▪ Bulb Removal : Press slightly the bulb downward and turn it
counterclockwise for removing.
▪ Bulb Fitting : Fit new bulb into the socket by pressing it
clockwise.
Bulb Removing Bulb Fitting
ООО “РусАвтоматизация” 454010 Челябинск, Гагарина 5,
русавтоматизация.рф
Россия, тел. 8 800 775 09 57 , +7(351)799 54 26,
тел./факс +7(351)211 64 57
(звонок бесплатный)
,[email protected], www.rusautomation.ru,
5) Lens Set Assembling
Assemble the glass lens set in reverse order of separating.
▪ This product is water-proof and anti-corrosion type for
outdoor use. When separate and assemble the product for wiring,
repair or check, keep the airtightnees of the product by
tightening each bolt and nut.
▪ Keep airtightness of cable entry by using water-proof connector
or cable grand.. Product can be damaged by water or dust if the
cable entry is exposed outdoor without airtightening.
▪ If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem
on product operating. Make sure the using voltage does not
exceed +/- 5% of the rated voltage.
▪ If lens or body of the product is contaminated by chemicals such
as thinner, benzene, the product can be damaged, discolored
or deformed. Please be careful.
Situation
Main Cause
Solution
Non Lighting Wire Disconnection
with Bulb
Wire Re-connection or
Bulb Change
Supplying Voltage Lower
Than Rated Voltage
Making Sure Using
Voltage
Wrong Selecting Voltage
Selection Switch to 220V
for Using AC 110V Power
Selecting Voltage
Selection Switch to
110V
Feeble Lighting
Low Revolving Speed
Wrong Operating Revolving
Speed Control Volume
Turn the Volume
Clockwise
Short Self-Life of Bulb Supplying Voltage Higher
than Rated Voltage
Making Sure Using
Voltage
Lens Deformation Caused
by Bulb Overheating
Damage on Transformer
(AC Type)
The Voltage of Bulb is
Higher than Rated Voltage
Changing Bulb with
Rated Voltage
Non Revolving Problem with Motor Contact Q.Light or
Their Agent
Wrong Wiring Making Sure Wiring
Neither Lighting Nor
Revolving No Power Supply Making Sure Power
Supply
Q-LIGHT CO., LTD.
http://www.qlightkr.com
E-mail : [email protected]
Seoul Office (Domestic Sales & A/S)
Tel) 02-2679-6152
Ansung BD A-312, 410-13 Sindorim-Dong, Guro-Gu, Seoul
Overseas Marketing Team / Plant
Tel) 055-328-4082 Fax) 055-328-4083
Plant #1 : 178-1 Woogye-Ri, Sangdong-Myun, Kimhae-Si,
KyungNam, Korea
Plant #2 : 417-1 Geumsa-Dong, Geumjung-Gu, Busan
ООО “РусАвтоматизация” 454010 Челябинск, Гагарина 5,
русавтоматизация.рф
Россия, тел. 8 800 775 09 57 , +7(351)799 54 26,
тел./факс +7(351)211 64 57
(звонок бесплатный)
,[email protected], www.rusautomation.ru,
Questo manuale è adatto per i seguenti modelli
3
Altri manuali RA Attrezzatura di illuminazione
