RAB Lighting SHARK-2FT Manuale utente
INSTRUCTIONS
SHARK®INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
Surface Mounting Bracket (2)
Housing
Lens and Tray Assembly
Tether Cable
Latch
Surface Mounting Bracket
Conduit Plug (3)
Mounting Surface
IMPO RTAN T
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
CAUTION: For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened
rmly. Apply weatherproof silicone sealant around the edge of the ceiling mounting box and/or junction box. This is
especially important with an uneven ceiling surface. Silicone all plugs and unused conduit entries.
Surface Mounting Brackets (2 included) Mounting Surface
Surface Mounting Brackets
(for SHARK2) (for SHARK4)
NOTE:Surface Mounting Brackets (2)
Lens and Tray AssemblyHousing
Tether Cables (2) Lens and Tray
Assembly
Conduit Plugs (3)
(2)
WARNING: To prevent wiring damage or abrasion, do not
expose wiring to edges of sharp objects.
Lens and Tray AssemblyHousing Latch
HousingSurface Mounting Brackets (2)
HousingSurface Mounting
Brackets (2).
Conduit Plugs
Housing
SHARK - 2FT SHARK - 4FT
INSTRUCTIONS
SHARK®INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
Surface Mounting Bracket
V-Hook (2)
Housing
JBSHARK-G2 Bracket
Apply Silicone to
Conduit Holes
Housing
Lens Groove
TPKSHARK-G2 Brackets (2)
Screw
(V-Hook for Chain Mounting included)
Surface Mounting Brackets (2) Housing
WARNING: Surface Mounting Brackets must be mounted
to Housing.
V-HookV-Hook (2 included)(2 included)Surface Mounting BracketSurface Mounting Bracket (2)(2)
HousingHousingV-HookV-Hook(2)(2)
(not supplied)(not supplied)(by others)(by others)
(4)(4)
Tamper Proof Bracket Accessory (TPKSHARK-G2 ordered separately)
TPKSHARK-G2 Bracket (2) Mounting Surface
TPKSHARK-G2 Bracket
HousingHousingTPKSHARK-G2 BracketTPKSHARK-G2 Bracket (2)(2)
Lens Groove
HousingTPKSHARK-G2 Bracket
Screws (2 per Bracket)
Junction Box Bracket Accessory Fig. 6
(JBSHARK-G2 ordered separately)
(not supplied)
JBSHARK-G2 BracketMounting SurfaceJunction Box
(supplied by others)Gasket
JBSHARK-G2 Bracket
Housing JBSHARK-G2 Bracket
Mounting Surface
Housing
JBSHARK-G2
Junction Box
Mounting Surface
Housing
Gasket
Mounting Surface
INSTRUCTIONS
SHARK®INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
CAUTION: Be sure xture temperature is cool enough to touch.
Do not clean or maintain while xture is energized.
WARNING: Polycarbonate is aected by cleaning agents
or other liquids containing partial solvents such as
low molecular weight aldehydes and ethers, ketones,
esters, aromatic hydrocarbons and perchlorinated
hydrocarbons. In addition, chemical attack ranging from
partial to complete destruction of polycarbonate occurs
in contact with alkalines, alkali salts, amines and high
zone concentrations. Please go to rablighting.com for a
detailed list of damaging chemicals.
PINK (or GRAY)
LIGHT
FIXTURE
Vaux 12V
YELLOW
GROUND
GROUND
( - ) DIM V
( + ) DIM V
COMMON
LINE BLACK
WHITE
PURPLE
(/480V)
LINE
COMMON
GROUND
NOT GROUND
(or gray)
Angle Surface Mounting Brackets Fig. 8
ANGSHARK-G2 ordered separately)
(not supplied)
Angle Bracket (ANGSHARK-G2) (2)
Angle Bracket
Surface Mounting Brackets (2) Angle Bracket (2)
Screws
HousingSurface Mounting Brackets (2)
Fig. 9
Angle
Bracket (2)
Housing
Screw
Surface
Mounting
Brakets
Mounting
Surface
INSTRUCTIONS
SHARK®INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.
Note: These instructions do not cover all details or variations in equipment nor do they provide
for every possible situation during installation, operation or maintenance.
BATTERY
CAUTION: FOR BATTERY BACKUP FIXTURE
BAT TERY
BATTERY
(Fi g. 11)
NOTE:
UNSWITCHED
CAUTION:
UNSWITCHED HOTHOT
UNSWITCHEDUNSWITCHED
SWITCHED
SWITCHEDSWITCHED HOT
SWITCHED
NEUTRALNEUTRAL
DIM (+)DIM (-)
DIM (+)DIM (-)
GROUND
GROUND
BATTERY
BATTERY
LIGHT
FIXTURE
INSIDE FIXTURE
BATTERY
Pink (or Gray)/DIM–
Black/Switched Line
Green/Ground
White/Neutral
Black/Unswitched Line
Purple/DIM+
BACKUP
DRIVER
BATTERY
CONNECTOR:
CONNECT
ONLY AFTER
AC SUPPLY
POWER IS
CONNECTED
SHARK 2FT 4FT IN 1221
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Free Lighting Layouts
Answered online or by request
© 2022 RAB LIGHTING Inc.
73674-RAB
Questo manuale è adatto per i seguenti modelli
1
Altri manuali RAB Lighting Lanterna
