Operating Modes
The thermostat has 3 operating modes.
Automatic - The temperature is set according to the energy-saving
schedule. To place the thermostat in this mode, press Mode/Ret until is
displayed. The current period setting is also displayed.
Temporary Bypass: If you modify the setpoint (by pressing the ,
or button) whenthe thermostat is in automatic mode,the new setpoint
will be used until the beginning of the next period.
Manual - The energy-saving schedule is not used. The temperature must
be set manually. To place the thermostat in this mode:
Press Mode/Ret
until
is displayed.
Set the temperature using the , or button.
Vacation - The thermostat is set to the Vacation temperature. Press
to place the thermostat in Vacation mode.
Energy-saving Schedule
The schedule consists of 4 periods per day which
represents
a
typical week
day. You can program the thermostat to skip the periods that do not apply to
your situation. For example, you can skip periods 2 and 3 for the weekend.
Period
Description
Associated temperature setting
Wake-up
Away from home
Return home
Sleep
The Comfort ( ) temperature is used in periods 1 and 3 and the Economy
( ) temperature is used in periods 2 and 4. For example, when the period
changes from 1 to 2, the setpoint automatically changes from Comfort setting
( ) to Economy setting ( ).
You can have a different program for each day of the week; i.e., each period
can start at different time for each day of the week. The thermostat has been
programmed with the following schedule.
Period
Setting
MO
TU
WE
TH
FR
SA
SU
am
am
am
am
am
--:--
--:--
pm
pm
pm
pm
pm
--:--
--:--
pm
pm
pm
pm
pm
pm
pm
To modify the schedule:
Press Pgm to access the programming mode. Period 1 is selected.
Press Day to select the day to program (hold for 3 seconds to select the
entire week).
Press Hour and Min to set the start time of the selected period, or press
Clear if you want to skip the period (--:-- is displayed).
Press Pgm to select another period, or press Day to select another day.
Then repeat step 3.
Press Mode/Ret to exit the programming mode.
NOTE: If no button is pressed for 60 seconds, the thermostat will
automatically exit the programming mode.
www.radimo.com
Use the following grid to record the new schedule.
Period
Setting
MO
TU
WE
TH
FR
SA
SU
:
Technical Specs
Power supply: refer to the power base installation instructions
Display range: 32°F to 140°F (0°C to 60°C)
Setpoint range: 40°F to 86°F (5°C to 30°C)
Display resolution: 1°F (0.5°C)
Storage: -4°F to 120°F (-20°C to 50°C)
Heating cycle length: 15 minutes
Data backup: In the event of a power failure, most settings are saved. Only
the time must be re-adjusted if the power failure lasts more than 2 hours. The
thermostat will return to the mode that was active prior to the power failure.
Warranty
Radimo warrants this product, excluding battery, to be free from defects in the
workmanship or materials, under normal use and service, for a period of five (5)
years from the date of purchase by the consumer. If at any time during the warranty
period the product is determined to be defective or malfunctions, Radimo shall
repair or replace it (at Radimo's option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from
which you purchased it, or
(ii) call Radimo Customer Care at 1-855-5-RADIMO. Customer Care will make
the determination whether the product should be returned, or whether a
replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall
not apply if it is shown by Radimo that the defect or malfunction was caused by
damage which occurred while the product was in the possession of a consumer.
Radimo's sole responsibility shall be to repair or replace the product within the
terms stated above. RADIMO SHALL NOT BE LIABLE FOR ANY LOSS OR
DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF
ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS
PRODUCT. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY RADIMO MAKES ON
THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE FIVE-YEAR DURATION
OF THIS WARRANTY. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which
vary from state to state.
If you have any questions concerning this warranty, please write Radimo
Customer Assistance
If you have any questions about the operation of your thermostat, please go to
www.radimo.com/us/products/radistat-pro/, or call Radimo Customer Care
toll-free at 1-855-5-RADIMO.
2/2
