Radio Shack 49-1000 Manuale utente
Please read this user’s guide before installing,
setting up and using your new product
www.radioshack.com
security console
mounting hardware
magnets (2)
door/window sensors (2)
Thank you for purchasing your Wireless Security System from
RadioShack.
what’s included
49-1000
Plug ‘n Power
Wireless Security System
keychain remote
door/window sensor
and magnet
motion detector
security console
AC adapter
keychain remote (1)
AC adapter
motion detector (1)
49-1000 UG.indd 1 7/27/2004 6:49:08 PM
2
The Basics
contents
Introduction 3
Installing Your Security System 4
Locating Security System Components 4
Attaching Your Cords 4
Installing the Backup Batteries 5
Locating Your Security Console 5
A Look at Your Security Console 5
Setting Up Your Security System 6
Reviewing Your Menu Options 6
Initializing/Registering Your Keychain Remote 8
Initializing Your Door/Window Sensors 8
Registering Your Door/Window Sensors 8
De-Registering Your Door/Window Sensors 9
Mounting Your Door/Window Sensors 10
Initializing Your Motion Detector 11
Registering Your Motion Detector 11
De-Registering Motion Detector 11
Mounting Your Motion Detector 12
Connecting Hard-Wired Inputs 13
Setting the Clock 13
Storing Phone Numbers 13
Recording Your Outgoing Message 14
Changing Your PIN 15
Clearing Your Security Console’s Memory 15
Setting Security Console Options 15
Setting the Delays 16
Setting the Timers 16
Reviewing/Canceling/Replacing Timers 17
Using Your Security System 18
Arming and Disarming 18
Problem Zones 18
When There’s An Alarm 19
Tampering 20
Controlling Lights and Appliances 20
Setting up Optional Lamp Modules 21
Operating from an Outside Telephone 22
Battery Notes 23
Frequently Asked Questions 25
FCC Wants You To Know 30
Accessories 31
49-1000 UG.indd 2 7/27/2004 6:49:10 PM
3
The Basics
Introduction
Thank you for purchasing your Wireless Security System from
RadioShack. It includes a Security Console with an automatic
dialer that calls neighbors or friends in the event of a break-in.
Two battery-powered Wireless Door/Window Sensors trigger the
alarm when a door or window is opened. A battery-powered Radio
Frequency (RF) Motion Detector protects an indoor area. And, your
Keychain Remote conveniently lets you arm and disarm the sytem
without using the keypad from inside or outside your home. It also
can turn lights on and off, if you have Plug ‘n Power Modules. All
sensors and remotes feature random digital security coding.
Your system may be configured with any combination of the
following items:
Up to 16 Keychain Remotes with arm/disarm and panic
functions, as well as buttons to control security lights in and
around the home.
Up to 30* magnetic switch operated Wireless Door/Window
Sensors.
Up to 30* Wireless Motion Detectors.
Additional Plug ‘n Power modules, such as plug-in lamp and
appliance modules and wired-in replacement wall switches
can be added to your system to turn lights on and off when
the alarm is tripped.
Door/Window Sensors and Motion Detectors may
be added in any combination up to a total of 30. For
example,15 Door/Window Sensors and 15 Motion
Detectors, or any combination up to a total of 30.
There are also two hard-wired inputs, which are
Zones 31 and 32.
Note
49-1000 UG.indd 3 7/27/2004 6:49:10 PM
4
The Basics
Installing Your Security System
locating your system components
Choose a central location for your Security Console that is near
a modular telephone jack and an AC outlet. You can place it on a
shelf or table, or mount it on a wall.
Plan the location of the Door/Window Sensors and Motion
Detectors so the RF path, which runs in a straight line from the
sensor to your Security Console, is not obstructed by large metal
objects, such as a refrigerator or freezer. Be sure it passes through
as few walls as possible. Door/Window Sensors may be hidden
behind drapes for a more discreet installation.
attaching your cords
Connect your Security Console with the included telephone cord
that has been terminated at each end with an RJ11 connector.
If possible, connect your Security Console to its own telephone
line to ensure your phone line is never busy when your Security
Console attempts to dial out. If this is not practical, your Security
Console may also share a line with an existing telephone using a
duplex adapter (available at your local RadioShack store).
Attach the power supply’s cord here
Attach the phone cord here
Hard Wired Inputs
Open the door on your Security Console and attach the AC adapter
to the connector labeled power supply. Plug the other end of the
AC adapter into any convenient (unswitched) AC outlet.
You must use the included AC adapter. It contains
circuitry required to control Plug ‘n Power modules,
so you cannot replace it with a regular 8V DC power
supply.
Tamper Switch
Battery Compartment
Note
49-1000 UG.indd 4 7/27/2004 6:49:18 PM
5
The Basics
installing backup batteries
Open the battery compartment at the top right side of your Security
Console and install four AA alkaline batteries (not supplied). You do
not need to disconnect power when installing or replacing batteries.
“TAMPER” appears in the display when you open the lid. After
installing your batteries, close the lid and enter your PIN to remove
“TAMPER” from your display.
locating your Security Console
Your Security Console can be placed on a table top or shelf. Or, you
can mount it on a wall, using the two slotted holes on the back of
your Security Console.
a look at your Security Console
menu start/ - Press to
start the menu or move
up through the menu
items.
menu start/ - Press to
start the menu or move
down through the menu
items.
bypass/clear - Press to
clear entries, back up
through menu levels, and
to bypass door/window
sensors and/or motion
detectors.
am/on - Press to enter am in a time setting, or to
turn on a Plug ‘n Power module.
pm/off - Press to enter pm in a time setting, or to
turn off a Plug ‘n Power module.
ok - Use to confirm menu selections and other
functions (starts with pg. 6).
arm home - Press to arm your system while at home.
arm away - Press to arm your system when you leave home.
Slotted hole
You can insert the two
rubber feet (included
in your packaging) in
the slotted holes, if
you decide to place
your Security Console
on a table top or shelf.
49-1000 UG.indd 5 7/27/2004 6:49:20 PM
6
Beyond the Basics
Setting Up Your Security System
reviewing your menu options
After you’ve connected power to your Security Console, the
display shows the time of day on the bottom left line, and “HOME
CONTROL” in the top line.
All features (except Home Control) require access to the Menu
mode. To do this, press either of the Menu / buttons. The display
then shows “ENTER PIN” (Personal Identification Number) in the
top line.
Enter the default PIN (0000). This clears the top line and shows *
for each number entered. See page 15 for instructions on how you
can change your PIN. After you enter the PIN, the display shows the
first menu level.
first menu level
To select a menu option, repeatedly press Menu / to scroll
through menu items 1 through 9. Or, you can press number button
1 through 9 on the control panel to go directly to that menu item.
Once you arrive at the menu item you desire, press ok to select it.
1. INSTALL Allows installation/removal of sensors, and/
or remotes.
2. SET CLOCK Enter time followed by am or pm.
3. PHONE NUMS Store up to six (16 digit) phone numbers.
4. MESSAGE RECORD (This is your own alarm message)
REPLAY (Replays your message).
5. NEW PIN Enter new 4 digit PIN.
6. MEMORY CLEAR Clear all Sensors, Remotes, Timers, or
Master Clear.
7. OPTIONS Set Chime On/Off, Siren On/Off, Set
Housecode or Light Code.
8. DELAYS Set Exit, Entry, Dial, and Answer Delays.
9. SET TIMER Enter unit code, then On and Off time, then
Daily, Once or Random.
To leave the first menu level, press clear. If you are entering
numbers (for the time, etc.), the clear button will clear all numbers
entered. Otherwise, clear gives the option of leaving the menu
completely and going back to the “HOME CONTROL” mode, or
staying in the “INSTALL” mode.
49-1000 UG.indd 6 7/27/2004 6:49:20 PM
7
Beyond the Basics
a look at your sub-menus
After pressing ok at the first menu level, you can select the
sub-menus under that menu item. Or, you can go directly to the
sub-menu item by pressing the corresponding number button.
Phone Numbers Sub-menu
You can enter up to six phone numbers (up to 16 digits), which
your system will dial in the event your system cannot reach anyone
on a specific phone number. Select PHONE 1 - PHONE 6 to enter
a phone number. off/pm enters a pause if you need to enter a
number before the complete phone number. For example, press 9
+ off/pm + telephone number.
Delays Sub-menu
All times are entered in seconds, up to 99.
ENTRY DELAY
EXIT DELAY
DIAL DELAY
ANSWER DELAY
Options Sub-menu
CHIME 1. CHIME ON
2. CHIME OFF (No chimes when doors/windows
are opened)
SIREN 1. SIREN ON
2. SIREN OFF (Silent Alarm)
HOUSECODE Chosen by Menu / buttons
LIGHTCODE Chosen by Menu / buttons
Memory Clear Sub-menu
CLEAR ALL SENSORS
CLEAR ALL REMOTES
CLEAR ALL TIMERS
MASTER
RESET
49-1000 UG.indd 7 7/27/2004 6:49:21 PM
8
Beyond the Basics
initializing your keychain remote
Press and hold the arm button on your
Keychain Remote for three to four seconds, and
then release it. This initializes the remote and picks a
random code that is used when it is registered with
your Security Console.
registering your keychain remote with your
Security Console
Press either of the Menu / buttons. The display shows
“ENTER PIN” in the top line. When you enter your PIN, *
displays for each number entered.
Press ok when you see “INSTALL” on the display.
Press any button on your Keychain remote. The Console
acknowledges that it has been registered by beeping and
displaying “RMOT 1 SET, RMOT 2 SET,” etc. as you install more
remotes.
Repeat this for each Keychain Remote you want to register.
Repeatedly press clear to back out of the menu. To confirm
your selection, press 1 for YES or 2 for NO. Pressing 1 takes
you back to the HOME CONTROL screen. Pressing 2 takes you
up one menu level.
initializing your Door/Window Sensors
To open the battery compartment, remove the screw
and install two AAA alkaline batteries, matching the
polarity (+ and -) marked inside.
Set the DELAY switch inside your Sensor to MAX (left)
for doors, or MIN (right) for windows.
Press and hold the button inside your sensor for
three to four seconds, and then release it. This
initializes the sensor and picks a random code
that is used when it is registered with your
Security Console.
Replace the battery compartment cover and
place the magnet next to the sensor, aligning
the arrows.
Arm
49-1000 UG.indd 8 7/27/2004 6:49:25 PM
9
Beyond the Basics
registering your Door/Window Sensors with
the console
Press either of the Menu / buttons. The display shows
“ENTER PIN” in the top line. When you enter your PIN, *
displays for each number entered.
Press ok when you see “INSTALL” on the display.
Move the magnet away from your Door/Window Sensor. Your
Security Console acknowledges that it has been registered with
a chime and displays “ZONE 1 SET.”
Repeat this for other Door/Window Sensors you want to
register. The display increments to ZONE 2 SET, etc., as you
install more Door/Window Sensors. If you connected a second
magnetic switch to the contacts on the sensor, move its magnet
away to install the second magnetic switch as a separate zone.
If desired, you can specify the zone for which you want the Door/
Window Sensor to be registered. Simply press the number of the
zone you want on your Security Console’s keypad after Step 2
above.
Repeatedly press clear to back out of the menu. After a short delay,
the display shows “HOME CONTROL” and the time of day.
When you replace the batteries, place the magnet next to the
sensor, and then move it away. If your system does not chime,
you must register the sensor again.
de-registering your Door/Window Sensors
Repeat Steps 1 and 2 above for Registering Door/Window
Sensors.
Press the number of the zone you desire, and then press clear.
The display asks you to confirm the deletion by pressing 1
for YES or 2 for NO. Pressing 1 displays the zone number you
removed. Pressing 2 takes you back to the “INSTALL ZONE”
screen.
Repeatedly press clear to back out of the menu. To confirm
your selection, press 1 for YES or 2 for NO. Pressing 1 takes
you back to the “HOME CONTROL” screen. Pressing 2 takes
you up one menu level.
Note
49-1000 UG.indd 9 7/27/2004 6:49:25 PM
10
Beyond the Basics
mounting your Door/Window Sensors
Attach the Door/Window Sensor to the wall using the mounting
screws provided.
Place the Door/Window Sensor as high as possible at the top
of the door/window, aligning the arrows on the magnet and
Door/Window sensor.
Make sure the arrows on the magnet and the Door/
Window Sensor are facing each other and that they
separate cleanly when the door or window is opened.
To protect two doors or windows close to each other,
use the Door/Window Sensor with an additional set of
magnetic switch contacts as shown in the diagram above.
Slide the DELAY switch (inside the Sensor) to MIN to
always trigger the alarm instantly (for windows). Slide the
switch to MAX to trigger the alarm after a preset entry
delay when the system is armed in the “AWAY” mode (for
doors).
The numbers 1 –32 in the display refer to up to 32 “zones.”
These represent up to 30 Door/Window Sensors and/or Motion
Detectors you can install, plus the two hard-wired zones. The
numbers show open zones, problem zones and bypassed zones
by being displayed as steady on (door or window open), slow flash
(there’s a problem with that zone) or fast flash (that zone has been
bypassed). Attempting to arm with an open or problem zone makes
the Security Console beep continuously. It also displays what the
cause is one zone at a time. Bypassing that zone (by pressing clear)
moves on to the next problem zone, if there is one.
Notes
Magnet and Sensor on door
frame
Additional Magnetic switches
49-1000 UG.indd 10 7/27/2004 6:49:26 PM
Altri manuali per 49-1000
1
Indice
Altri manuali Radio Shack Sistema di sicurezza
Radio Shack
Radio Shack 49-1000 Manuale utente
Radio Shack
Radio Shack RS-1000 Manuale utente
Radio Shack
Radio Shack CENTRAL 49-2570 Manuale utente
Radio Shack
Radio Shack RS-4000 Manuale utente
Radio Shack
Radio Shack Invisible Beam Entry Alert Manuale utente
Radio Shack
Radio Shack 65562 Manuale utente
Radio Shack
Radio Shack 65572 Manuale utente
Radio Shack
Radio Shack 49-1011 Manuale utente
Radio Shack
Radio Shack 49-2513 Manuale utente
Radio Shack
Radio Shack 49-1010 Manuale utente
Radio Shack
Radio Shack 49-418 Manuale utente
Radio Shack
Radio Shack Self-Stick Door/Window Alarm Manuale utente
Radio Shack
Radio Shack Wireless Key-Lock Door/Window Alarm 49-118 Manuale utente
Radio Shack
Radio Shack RS-2000 Manuale utente
Radio Shack
Radio Shack CENTRAL 2000 49-351 Manuale utente
Radio Shack
Radio Shack Passive Manuale utente
Radio Shack
Radio Shack 49-2534 Manuale utente
Radio Shack
Radio Shack CENTRAL 5000 49-2570 Manuale utente
Radio Shack
Radio Shack Two-Zone Burglar Alarm System Manuale utente
Radio Shack
Radio Shack RS-3000 Manuale utente
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente