RadiSys R220 Manuale utente

R220 NETWORK APPLIANCE

July 2014

Setup Guide

Revision history

Publication date Description

August 2012 Initial release.

December 2012 Added rack installation and component replacement instructions, as well as other technical updates.

March 2013 Renamed product to R220 and made some technical updates.

August 2013 Technical updates. See What’s new in this release on page 5 for details.

July 2014 Added a new chapter on Remote Management. See Chapter 4 for details.

Radisys is a registered trademarks of RadiSys Corporation. All other trademarks, registered trademarks, service marks, and trade names are the

property of their respective owners.

Table of Contents

Preface ................................................................................................................................................ 5

About this manual........................................................................................................................................5

What’s new in this release...........................................................................................................................5

Where to get more product information .......................................................................................................5

Notational conventions ................................................................................................................................6

Electrostatic discharge ................................................................................................................................6

Chapter 1: Overview and specifications ..........................................................................................7

Mechanical characteristics ..........................................................................................................................7

General layout of components.....................................................................................................................8

Power supplies ............................................................................................................................................9

User panel .................................................................................................................................................11

Safety ........................................................................................................................................................12

Environment ..............................................................................................................................................13

Electromagnetic compatibility ....................................................................................................................14

Chapter 2: Installing the server....................................................................................................... 16

Before you begin .......................................................................................................................................16

Step 1: Unpack the system unit.................................................................................................................16

Step 2: Check the voltage range ...............................................................................................................17

Step 3: Install internal options ...................................................................................................................17

Step 4: Connect the cables .......................................................................................................................17

Step 5. Perform the check-out procedure..................................................................................................19

Step 6. Run the setup utility program ........................................................................................................19

Step 7. Finish the installation.....................................................................................................................19

Technical support ......................................................................................................................................19

Chapter 3: Installing optional components.................................................................................... 20

Turning off power and disconnecting cables .............................................................................................20

Removing the cover...................................................................................................................................21

Installing memory modules........................................................................................................................22

Installing PCIe cards..................................................................................................................................26

Installing hard disk and solid state drives ..................................................................................................29

Installing and removing an I/O module ......................................................................................................31

Replacing I/O modules with hard disk or solid state drives .......................................................................33

Table of Contents

Installing a blower......................................................................................................................................36

Accessing diagnostic ports ........................................................................................................................37

Installing a power supply ...........................................................................................................................38

Installing rack ear covers...........................................................................................................................39

Mounting the R220 into a rack...................................................................................................................40

Chapter 4: Remote Management..................................................................................................... 47

Remote access to the R220 Network Appliance .......................................................................................48

Configuring the R220 Network Appliance..................................................................................................51

Monitoring the R220 remotely ...................................................................................................................54

Maintenance..............................................................................................................................................57

Appendix A: Safety information...................................................................................................... 58

General safety ...........................................................................................................................................58

Rack-installation safety..............................................................................................................................59

Safety inspection guide .............................................................................................................................59

Federal Communications Commission (FCC) statement...........................................................................64

Industry Canada compliance statement ....................................................................................................64

European Union (EU) electromagnetic compatibility directive...................................................................64

Preface

About this manual

This manual describes the Radisys R220, a 2U network appliance that is designed for long-

term use, flexible configuration, and easy maintenance and upgrading. The product is referred

to as the “R220” or “chassis” throughout the remainder of this manual.

What’s new in this release

Added chapter 4, Remote Management. This new chapter describes the option to manage the

R220 remotely, and includes information on the general technology and setup.

Where to get more product information

For information on this product family and other Radisys products, see the Radisys Web site at

www.radisys.com. Downloads (manuals, release notes, software, etc.) are available at

www.radisys.com/downloads.

Important: Be sure to read the safety information beginning on page 58.

Preface

Notational conventions

This manual uses the following conventions

All numbers are decimal unless otherwise stated.

Electrostatic discharge

WARNING! This product contains static-sensitive components and should be handled with care.

Failure to employ adequate antistatic measures can cause irreparable damage to components.

Electrostatic discharge (ESD) damage can result in partial or complete device failure,

performance degradation, or reduced operating life. To avoid ESD damage, the following

precautions are strongly recommended.

•Keep each module/PCB in its ESD shielding bag until you are ready to install it.

•Before touching a module, attach an ESD wrist strap to your wrist and connect its other

end to a known ground.

• Handle the module only in an area that has its working surfaces, floor coverings, and

chairs connected to a known ground.

•Hold modules only by their edges and mounting hardware. Avoid touching PCB

components and connector pins.

For further information on ESD, visit www.esda.org.

BoldText A keyword.

ItalicText File, function, and utility names.

MonoText Screen text and syntax strings.

BoldMonoText A command to enter.

ItalicMonoText Variable parameters.

Brackets [ ] Command options.

Curly braces { } A grouped list of parameters.

Vertical line | An “OR” in the syntax. Indicates a choice of parameters.

Chapter

Overview and specifications

The R220 is designed for long-term use while accommodating advances in technology. The

server is engineered for flexibility and easy upgrading and maintenance. The chassis and

covers are designed to be used with many different configurations. Design highlights include:

• 2U 19-inch rack-mount chassis with 20-inch depth

• Front I/O access

•Supports AC and DC power supplies

• Supports 2.5" SAS or SATA disk drives, including SSD

• Low acoustic noise

•Custom memory, HDD, coprocessor(s), and I/O card configurations available

• Remote system management, including power-up/down, sensor monitoring, etc.

Note: A monitor, keyboard, and mouse (not included) may be required for operation.

Figure 1. R220 system

Mechanical characteristics

aMeasured from the external surface of the front I/O panel to the external surface of the rear I/O

panel.

bThe actual weight depends on the installed options.

Table 1. Mechanical characteristics

Characteristic Value

Dimensions 447 mm (17.6 in) ×87.12 mm (3.43 in) ×508 mm (20 in) a

Weight b9 to 22.7 kg (20 to 50 lb)

Overview and specifications

General layout of components

Figures 2 and 3 show the locations of the major components and interfaces.

Figure 2. Front panel interface and internal components

Figure 3. Rear panel interface and components

Note: Figure 3 shows one AC power supply and one DC power supply for illustrative purposes

only. This R220 is designed to support 1+1 redundant hot-swappable power supplies. Both

bays should be filled with either AC, DC, or PSU blank modules to maintain adequate cooling.

IO bay 1 IO bay 4

(HDD 7)

IO bay 3

(HDD 6)

IO bay 2

(HDD 5)

Blower module 1 Blower module 3

Blower module 2 Blower module 4

HDD 0 HDD 1 HDD 2 HDD 3 HDD 4 User panel

Power supply B

Power supply A

PCIe slot 3

PCIe slot 2

PCIe slot 1

PCIe slot 6

PCIe slot 5

PCIe slot 4

TELCO alarm

Chassis ground

Overview and specifications

Power supplies

The R220 is designed to support multiple 80 PLUS® Platinum or Gold efficiency power

supplies. Specifications based on the 800W AC power supply and 750W DC power supply are

shown in Tables 2 and 3, respectively.

800W AC/DC power supply

• Model R220RCPSU-AC

•800W redundant AC power supply

•Platinum efficiency

•Hot-swappable

•PMBus monitoring

• Automatic voltage range selection for AC input. Acceptable inputs are:

•200V to 240V AC, 50Hz; 4.79 Amps

•100V to 127V AC, 60Hz; 9.9 Amps

WARNING! To reduce the risk of electrical shock or energy hazards, comply with these

precautions:

•Make sure you have an adequate number of properly grounded electrical outlets for your

system and any other peripheral devices.

• The unit shall be installed in a restricted access area in accordance with the authority having

jurisdiction.

750W DC/DC power supply

• Model R220RCPSU-DC

• 750W redundant DC power supply

•Gold efficiency

•Hot-swappable

•PMBus monitoring

•Automatic voltage range selection for DC input. Acceptable inputs are -38V to -75V DC;

24-12.5 Amps

Table 2. Power supply specifications

Output Minimum load Maximum load Load reg Ripple and noise

+12V 0.0A 65A +/–5% 120mV P-P

+12V SB 0.0A 2.0A +/–5% 120mV P-P

Table 3. Power supply specifications

Output Minimum load Maximum load Load reg Ripple and noise

+12V 0.5A 62A +/–5% 120mV P-P

+12V SB 0.05A 2.1A +/–5% 120mV P-P

Overview and specifications

Connecting DC power

Connect the power wires from the R220RCPSU-DC to the DC source as follows:

•Red wire to DC source 0

•Black wire to DC source -48V

•Green wire to DC source ground

WARNING! Ensure power to the power feed cables is OFF before routing and connecting the

cables.

WARNING! To reduce the risk of electrical shock or energy hazards, comply with these

precautions:

•Make sure you have an adequate number of properly grounded electrical outlets for your

system and any other peripheral devices.

• The unit shall be supplied by a reliably grounded SELV power supply or centralized DC source,

and shall be reliably grounded to protective earth.

• The unit shall be installed in a restricted access area in accordance with the authority having

jurisdiction.

Power consumption

The R220 supports many configurations for I/O, storage, and computation. Table 4 documents

the power consumption of a maximum configuration where PCIe extenders are used for the

front I/O modules, and each front I/O module can consume up to 35 watts. The table

represents the maximum power consumption for each component, not the actual supported

maximum power consumption.

Table 4. R220 component power consumption

Component Quantity Unit power (watts) Total power (watts)

Motherboard 1 88 88

CPU 2 105 210

75W PCIe card 2 75 150

Front I/O module 4 35 140

2.5" SAS HDD 5 10 50

Blower 4 48 192

Indice

Altri manuali RadiSys Hardware di rete

RadiSys

RadiSys ATCA-5400 RTM Manuale di servizio

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente