raditeq RadiGen RGN2400A Manuale utente
RadiGen®
Signal generator
Models:
RGN2400A | RGN2006A
RGN2006B
Quick Start Guide
Publish date: 28/05/2021
RadiGen®Quick Start Guide RadiGen®Quick Start Guide
Connect either the LF or HF output to the device, switch the RadiCentre® on, Proceed to the RadiGen®
‘control screen’ to congure the RF signal.
Basic changes to the generator settings are done in the control screen.
Press the settings to prompt numeric window where the changes can be made.
Increase or decrease the frequency and level, step by step, with ‘up’ and ‘down’
Press ‘cong’ to enter the device conguration screen for more detailed conguration.
Devices requiring a RF signal,
For example an RF amplier or the
RadiField® PSU2400A. can be connected to
this outputs depending on the desired frequency
How to connect the RadiGen®
RadiCentre® - Control
How to congure the RadiGen® in RadiMation®
1. Start the latest version of RadiMation®;https://www.raditeq.com/radimation-download/
2. Select the button ‘Devices’ at the top menu bar, followed by clicking ‘Congure’;
3. In the conguration screen select ‘Device Drivers’ and Select ‘Signal Generators’ as driver type;
4. Click the ‘Add’ button to open the selection of available drivers in RadiMation®;
5. Enter ‘RGN’ in the search bar which will show all available RadiGen® drivers;
6. Select the correct driver, double click (Optional, rename) and press ‘OK’.
3
4
5
2
6
LF
HF
Connecting the RadiGen® to the RadiCentre®
2
3
1. Select the recently added RadiGen® Driver
2. Select ‘Advanced’
3. Click on the tab ‘RadiCentre®’
4. Under device identication select the RadiCentre® slot
number the RadiGen® Card is in
5. When the correct slot number is chosen continue to
checking the RadiGen®
RadiGen®Quick Start Guide RadiGen®Quick Start Guide
How to check whether the RadiGen® is connected to RadiMation
For the best experience make sure that the most recent RadiMation® up-
date is installed. Make sure that all Equipment is correctly connected and
turned on.
Select Devices in the top menu bar
Open Device Drivers and select Device driver Type: Signal Generators
Double Click the Recently congured RadiGen® or click edit.
Finally select the Check button on the right side of the opened screen.
When correctly Congured RadiMation will notify you that the device was installed correctly.
1.
2.
3.
4.
5.
1
3
2
4
This product contains embedded software, which is eld upgradeable from the RadiCentre® using the USB-A connection port on the
backside panel of the RadiCentre®. For more information about updating your Raditeq plug-in card, please read the RadiCentre®
manual.
Read the contents of this product manual carefully and become familiar with the safety markings, the product instructions and the
handling of the system. Please refer to the applicable product manual(s) for further information regarding the operation
and control of the product(s).
This product contains no hazardous substances as described in the RoHS Directive (2015/863/EU).
This equipment is designed to be used as a plug-in card for the RadiCentre® series. Do not use this card on its own or in combination with
any other mainframe. Using this product with any other mainframe can cause harm and will void warranty.
Only qualied maintenance personnel are allowed to perform maintenance and/or repair the equipment.
This product® contains materials that can be recycled and reused to minimize material waste. At the ‘end-of-life’, specialized
companies can dismantle the discarded system to collect the reusable and recyclable materials. If your product is at its ‘end-of-life’,
please return it to your local reseller or to Raditeq for recycling.
Please keep this Quick Start Guide close at hand when you operate your Raditeq equipment and instruments. For more information,
please consult your product manual or visit www.raditeq.com Be advised that visuals used as an example and may dier from your
product version. Copyright © 2008 – 2021 Raditeq B.V.
Important information
When you need support with the conguration of your Radi-Product in RadiMation®, please consult the RadiMation® support team
at: [email protected].
It is also advised to visit the RadiMation® Wiki page and the FAQ section, which can be found at: https://wiki.radimation.com
RadiMation® software can be downloaded at: https://www.raditeq.com/emc-test-software/radimation-download
This product contains no hazardous substances as described in the RoHS Directive (2011/65/EU).
For all Manuals, Datasheets and Quick start Guides, please visit:
www.raditeq.com/support/downloads
Optimize your EMC test system
Congure your fully automated EMC test system with the
extensive range of Raditeq products!
For more information about Raditeq’s EMC
and RF products, visit our website at
www.raditeq.com
RadiMation
Electric Field Probes
Modular test systems
Automated EMC & RF software
Electric Field Generators
Raditeq
Featured products
Questo manuale è adatto per i seguenti modelli
2
