RADVision SCOPIA 400 Istruzioni di montaggio

SCOPIA 400

Platform Guide

NOTICE

RADVISION Ltd. and are protected by United States copyright laws, other applicable copyright laws

and international treaty provisions. RADVISION Ltd. retains all rights not expressly granted.

This publication is RADVISION confidential. No part of this publication may be reproduced in any

form whatsoever or used to make any derivative work without prior written approval by RADVISION

Ltd.

No representation of warranties for fitness for any purpose other than what is specifically mentioned

in this guide is made either by RADVISION Ltd. or its agents.

RADVISION Ltd. reserves the right to revise this publication and make changes without obligation to

notify any person of such revisions or changes. RADVISION Ltd. may make improvements or

changes in the product(s) and/or the program(s) described in this documentation at any time.

If there is any software on removable media described in this publication, it is furnished under a

license agreement included with the product as a separate document. If you are unable to locate a

copy, please contact RADVISION Ltd. and a copy will be provided to you.

Unless otherwise indicated, RADVISION registered trademarks are registered in the United States

and other territories. All registered trademarks recognized.

For further information contact RADVISION or your local distributor or reseller.

SCOPIA 400 Platform, October 2007

Publication 6

http://www.radvision.com

Contents iii

About This Manual

Related Documentation vii

1SCOPIA 400 Platform Chassis Overview

About the SCOPIA 400 Platform 1

About the SCOPIA 400 Chassis 1

About the Rear Transition Module 2

Viewing System Indicators 2

System Power Indication 2

System Alarm Indication 2

System Fan Indication 3

System Temperature Indication 3

Normal System Startup LED Indications 3

SCOPIA 400 Chassis Power Supply 3

Replacing a Power Supply Unit 4

2SCOPIA 400 Platform Device Overview

About SCOPIA 400 Platform Devices 7

3Cable Connections and Pin-outs

Unit RS-232 9-Pin Serial Port 10

9-Pin Serial Port Terminal Cable 10

RJ-45 8-Pin IP Network Port 11

RJ-45 Serial Port Adapter Cable 11

CONTENTS

iv SCOPIA 400 Platform Guide

Circuit Switch Network Port 11

4Technical Specifications

Technical Specifications Table 13

5Safety

Electrical Safety 17

Grounding 18

High Voltage 18

Power Supply 18

ESD Procedures 19

Sicherheit

Elektrische Sicherheit 20

Erdung 20

Hochspannung 20

Netzteil 20

ESD-Verfahren 21

Warnhinweise 21

Seguridad

Seguridad Electrica 22

Tierra 22

Alto Voltage 22

Abastecimiento de Electricidad 23

Procedimientos ESD 23

Securite

Securite Electrique 24

Mise a la Terre 24

Contents v

Haute Tension 25

Alimentation Electrique 25

Prevention des Decharges Electrostatiques 25

6Compliance and Certifications

Safety Compliance 27

EMC 28

FCC Part 15 Notice 28

Telecom 29

ACTA Customer Information 29

Canadian Department of Communications Notice 30

Environmental Compliance 31

vi SCOPIA 400 Platform Guide

About This Manual vii

ABOUT THIS MANUAL

The SCOPIA 400 Platform Guide provides information on the SCOPIA 400

platform and its components. For information and operating procedures

pertaining to a specific element board or application, refer to the corresponding

manual provided with the product.

DOCUMENTATION The SCOPIA 400 platform documentation set is available on the RADVISION

Utilities and Documentation CD and includes manuals and online helps. The

manuals are available in PDF format.

Note You require Adobe Acrobat Reader version 4.0 or later to open the PDF

files. You can download Acrobat Reader free of charge from www.adobe.com.

SCOPIA 400 Platform Chassis Overview 1

SCOPIA 400 PLATFORM CHASSIS

OVERVIEW

This section introduces the RADVISION SCOPIA 400 platform and describes the

SCOPIA 400 chassis, and includes the following topics:

About the SCOPIA 400 Platform

About the SCOPIA 400 Chassis

About the Rear Transition Module

Viewing System Indicators

SCOPIA 400 Chassis Power Supply

ABOUT THE

SCOPIA 400

PLATFORM

The SCOPIA 400 platform is a high performance, multi-functional chassis that

supports mix-and-match functionality. This highly configurable and scalable

design provides maximum flexibility for configuring platforms to meet a wide

variety of functional and performance application requirements.

The SCOPIA 400 platform consists of a number of embedded applications on

blades that are inserted into the SCOPIA 400 chassis.

ABOUT THE

SCOPIA 400

CHASSIS

The SCOPIA 400 chassis is 3.5" (2U) high and can mount in a 19-inch rack. The

chassis can accommodate a RADVISION device blade in each of its four slots.

Each board receives power via the backplane.

There are four slots at the front and rear of the chassis. The front slots are used

for the main device boards. The rear slots are used only by Gateway Rear

Transition Module (RTM) boards which allow a connection to the ISDN or

serial network.

2 SCOPIA 400 Platform Guide

About the Rear Transition Module

The chassis provides easy access for maintenance and board replacement.

Figure 1-1 SCOPIA 400 Chassis Front View

ABOUT THE REAR

TRANSITION

MODULE

The rear panel of the SCOPIA 400 chassis contains four slots for the insertion of

Rear Transition Module (RTM) boards that connect to the chassis backplane.

The RTM provides a Circuit Switch Network connection.

VIEWING SYSTEM

INDICATORS You can view system-level monitoring information by monitoring the LED

indicators on the front of the SCOPIA 400 chassis. The LEDs are connected to

the chassis System Information Card (SIC).

Note You can also monitor chassis functions remotely via the web userinterface

of the MCU or Gateway installed in the top slot of the SCOPIA 400 chassis. If you

install a SCOPIA Media and Video Processor in the top slot of the SCOPIA 400

chassis, monitoring via the web is not available.

SYSTEM POWER

INDICATION The POWER LED functions as follows:

Illuminates green to indicate that the power supply is operating

normally.

Illuminates red to indicate that one of the power supply units is

malfunctioning, or that one power feed is missing.

SYSTEM ALARM

INDICATION The ALARM LED functions as follows:

Illuminates green to indicate that the system is functioning normally.

Illuminates red to indicate that a system failure has been detected.

Check other LEDs to identify the type of failure.

Altri manuali per SCOPIA 400

Indice

Altri manuali RADVision Sistema di conferenza

RADVision

RADVision Scopia XT1000 Manuale utente

RADVision

RADVision Scopia XT Executive Manuale utente

RADVision

RADVision Scopia Elite 5100 Series Manuale utente

RADVision

RADVision Scopia XT5000 Series Manuale di servizio

RADVision

RADVision SCOPIA Elite 5200 Manuale utente

RADVision

RADVision Scopia XT5000 Series Manuale utente

RADVision

RADVision SCOPIA Elite 5200 Manuale operativo

RADVision

RADVision Scopia XT5000 Series Manuale utente

RADVision

RADVision SCOPIA XT100 Series Manuale utente

RADVision

RADVision Scopia XT1000 Manuale utente

RADVision

RADVision SCOPIA XT4000 Series Manuale utente

RADVision

RADVision SCOPIA XT4200 Manuale utente

RADVision

RADVision Scopia XT1000 Manuale di servizio

RADVision

RADVision Scopia XT5000 Series Manuale di servizio

RADVision

RADVision Scopia XT Series Manuale utente

RADVision

RADVision Scopia XT1000 Manuale utente

RADVision

RADVision SCOPIA 100 MCU Manuale utente

RADVision

RADVision SCOPIA VC240 Manuale utente

RADVision

RADVision Scopia XT1000 Manuale utente

RADVision

RADVision SCOPIA Elite 5000 Series MCU Manuale utente

RADVision

RADVision Scopia XT Guida di riferimento rapido

RADVision

RADVision Scopia XT5000 Series Manuale utente

RADVision

RADVision Scopia XT5000 Series Manuale utente

RADVision

RADVision Scopia XT5000 Series Manuale utente

Manuali Sistema di conferenza popolari di altre marche

Kramer

Kramer VIA GO Manuale utente

AVT

AVT MAGIC AC1 Go Manuale utente

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuale utente

Sony

Sony PCS-I150 Manuale utente

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuale utente

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guida

Speakerbus

Speakerbus iD 712 Manuale utente

Trelleborg

Trelleborg SafePilot CAT PRO Manuale utente

Sennheiser

Sennheiser ADN Manuale utente

ADTRAN

ADTRAN NetVanta 7100 Manuale utente

AINA

AINA PTT Voice Responder Manuale utente

Yamaha

Yamaha ProjectPhone PJP-100H Manuale utente

vissonic

vissonic VLI Series Manuale utente

Panasonic

Panasonic KX-VC500 Manuale utente

Poly

Poly Trio 8300 Manuale utente

Crestron

Crestron Mercury CCS-UCA-SMK Disegno dimensionale

Inmarsat

Inmarsat mini M Manuale utente

Tenveo

Tenveo ALL-IN-ONE Manuale utente