Radyne ComStream SFC6400A Manuale utente

SFC6400A/SFC1450A

Synthesized Frequency Upconverter

Installation and Operation Manual

TM106

Revision 1.1

Radyne ComStream Corp. •3138 E. Elwood St. •Phoenix, AZ 85034 •(602) 437-9620 •Fax: (602) 437-4811 •www.radn.com

SFC6400A/SFC1450A Synthesized Frequency Upconverter Warranty Policy

TM106 –Rev. 1.1 iii

Warranty Policy

Radyne ComStream Corporation (Seller) warrants the items manufactured and sold by Radyne

ComStream Corporation to be free of defects in material and workmanship for a period of two (2) years

from date of shipment Radyne ComStream Corporation’s obligation under its warranty is limited in

accordance with the periods of time and all other conditions stated in all provisions of this warranty.

This warranty applies only to defects in material and workmanship in products manufactured by Radyne

ComStream Corporation. Radyne ComStream Corporation makes no warranty whatsoever concerning

products or accessories not of its manufacture. Repair, or at Radyne ComStream Corporation’s option,

replacement of the Radyne ComStream Corporation products or defective parts therein shall be the sole

and exclusive remedy for all valid warranty claims.

Warranty Period

The applicable warranty period shall commence on the date of shipment from Radyne ComStream

Corporation’sfacility to the original purchaser and extend for the stated period following the date of

shipment. Upon beginning of the applicable Radyne ComStream Corporation warranty period, all

customers’ remedies shall be governed by the terms stated or referenced in this warranty. In-warranty

repaired or replacement products or parts are warranted only for the remaining portion of the original

warranty period applicable to the repaired or replaced products or parts. Repair or replacement of

products or parts under warranty does not extend the original warranty period.

Warranty Coverage Limitations

The following are expressly not coveredunder warranty:

1. Any loss, damage and/or malfunction relating in any way to shipping, storage, accident, abuse,

alteration, misuse, neglect, failure to use products under normal operating conditions, failure to

use products according to any operating instructions provided by Radyne ComStream

Corporation, lack of routine care and maintenance as indicated in any operating maintenance

instructions, or failure to use or take any proper precautions under the circumstances.

2. Products, items, parts, accessories, subassemblies, or components which are expendable in

normal use or are of limited life, such as but not limited to, bulbs, fuses, lamps, glassware, etc.

Radyne ComStream Corporation reserves the right to revise the foregoing list of what is covered

under this warranty.

Warranty Replacement and Adjustment

Radyne ComStream Corporation will not make warranty adjustments for failures of products or parts,

which occur after the specified maximum adjustment period. Unless otherwise agreed, failure shall be

deemed to have occurred no more than seven (7) working days before the first date on which Radyne

ComStream Corporation receives a notice of failure. Under no circumstances shall any warranty exceed

the period stated above unless expressly agreed to in writing by Radyne ComStream Corporation.

Liability Limitations

This warranty is expressly in lieu of and excludes all other express and implied warranties, Including

but not limited to warranties of merchantability and of fitness for particular purpose, use, or

applications, and all other obligations or liabilities on the part of Radyne ComStream Corporation,

unless such other warranties, obligations, or liabilities are expressly agreed to in writing by Radyne

ComStream Corporation.

Warranty Policy SFC6400A/SFC1450A Synthesized Frequency Upconverter

iv TM106 –Rev. 1.1

All obligations of Radyne ComStream Corporation under this warranty shall cease in the event its

products or parts thereof have been subjected to accident, abuse, alteration, misuse or neglect, or

which have not been operated and maintained in accordance with proper operating instructions.

In no event shall Radyne ComStream Corporation be liable for Incidental, consequential, special or

resulting loss or damage of any kind howsoever caused. Radyne ComStream Corporation’s liability

for damages shall not exceed the payment, if any, received by Radyne ComStream Corporation for

the unit or product or service furnished or to be furnished, as the case may be, which is the subject

of claim or dispute.

Statements made by any person, including representatives of Radyne ComStream Corporation,

which are inconsistent or in conflict with the terms of this warranty, shall not be binding upon

Radyne ComStream Corporation unless reduced to writing and approved by an officer of Radyne

ComStream Corporation.

Warranty Repair Return Procedure

Before a warranty repair can be accomplished, a Repair Authorization must be received. It is at this time

that Radyne ComStream Corporation will authorize the product or part to be returned to the Radyne

ComStream Corporation facility or if field repair will be accomplished. The Repair Authorization may be

requested in writing or by calling:

Radyne ComStream Corporation

3138 E. Elwood St.

Phoenix, Arizona 85034 (USA)

ATTN: Customer Support

Phone: (602) 437-9620

Fax: (602) 437-4811

Any product returned to Radyne ComStream Corporation for examination must be sent prepaid via the

means of transportation indicated as acceptable to Radyne ComStream Corporation. Return

Authorization Number must be clearly marked on the shipping label. Returned products or parts should

be carefully packaged in the original container, if possible, and unless otherwise indicated, shipped to the

above address.

Non-Warranty Repair

When a product is returned for any reason, Customer and its shipping agency shall be responsible for all

damage resulting from improper packing and handling, and for loss in transit, not withstanding any defect

or nonconformity in the product. By returning a product, the owner grants Radyne ComStream

Corporation permission to open and disassemble the product as required for evaluation. In all cases,

Radyne ComStream Corporation has sole responsibility for determining the cause and nature of failure,

and Radyne ComStream Corporation’s determination with regard thereto shall be final.

SFC6400A/SFC1450A Synthesized Frequency Upconverter Preface

TM106 –Rev. 1.1 v

Preface

This manual provides installation and operation information for the Radyne ComStream Corporation

SFC6400A and SFC1450A Upconverters. This is a technical document intended for use by

engineers, technicians, and operators responsible for the operation and maintenance of the SFC

Upconverter.

Conventions

Whenever the information within this manual instructs the operator to press a pushbutton switch or

keypad key on the SFC Upconverter Front Panel, the pushbutton or key label will be shown

enclosed in "less than" (<) and "greater than" (>) brackets. For example, the Reset Alarms

Pushbutton will be shown as <RESET ALARMS>, while a command that calls for the entry of a ‘7’

followed by ‘ENTER’ Key will be represented as <7,ENTER>.

Cautions and Warnings

A caution icon indicates a hazardous situation that if not avoided, may result in minor or moderate

injury. Caution may also be used to indicate other unsafe practices or risks of property damage.

A warning icon indicates a potentially hazardous situation that if not avoided, could result in death

or serious injury.

Trademarks

Product names mentioned in this manual may be trademarks or registered trademarks of their

respective companies and are hereby acknowledged.

2003, Radyne ComStream Corporation. This manual is proprietary to Radyne ComStream

Corporation and is intended for the exclusive use of Radyne ComStream Corporation’s customers.

No part of this document may in whole or in part, be copied, reproduced, distributed, translated or

reduced to any electronic or magnetic storage medium without the express written consent of a

duly authorized officer of Radyne ComStream Corporation.

Preface SFC6400A/SFC1450A Synthesized Frequency Upconverter

vi TM106 –Rev. 1.1

Disclaimer

This manual has been thoroughly reviewed for accuracy. All statements, technical information, and

recommendations contained herein and in any guides or related documents are believed reliable,

but the accuracy and completeness thereof are not guaranteed or warranted, and they are not

intended to be, nor should they be understood to be, representations or warranties concerning the

products described. Radyne ComStream Corporation assumes no responsibility for use of any

circuitry other than the circuitry employed in Radyne ComStream Corporation systems and

equipment. Furthermore, since Radyne ComStream Corporation is constantly improving its

products, reserves the right to make changes in the specifications of products, or in this manual at

any time without notice and without obligation to notify any person of such changes.

Record of Revisions

Revision

Level Date Reason for Change

1.0 4-7-03 Initial Release

1.1 6-26-03 Revised Sections 2 and 7 to comply with CE requirements.

Comments or Suggestions Concerning this Manual

Comments or suggestions regarding the content and design of this manual are appreciated. To

submit comments, please contact the Radyne ComStream Corporation Customer Service

Department.

SFC6400A/SFC1450A Synthesized Frequency Upconverter Table of Contents

TM106 –Rev. 1.1 vii

Table of Contents

Section 1 -Introduction

1.0 Description_______________________________________________________ 1-1

1.1 Protection Switch Versatility__________________________________________ 1-3

1.2 Chain Switching (Optional) __________________________________________ 1-3

Section 2 -Installation

2.0 Installation Requirements____________________________________________ 2-1

2.1 Unpacking________________________________________________________ 2-2

2.2 Removal and Assembly_____________________________________________ 2-2

2.3 Mounting Considerations ____________________________________________ 2-2

2.4 Initial Power-Up ___________________________________________________ 2-2

Section 3 -Operation

3.0 Theory of Operation________________________________________________ 3-1

3.1.1 Stand-Alone Operation ____________________________________________ 3-2

3.1.2 1:1 Switch______________________________________________________ 3-2

3.1.3 1:8 Switch______________________________________________________ 3-2

3.2 Optional Chain Switching Operation ___________________________________ 3-2

Section 4 –User Interfaces

4.0 User Interfaces____________________________________________________ 4-1

4.1 Front Panel User Interface___________________________________________ 4-1

4.1.1 Monitoring Ports _________________________________________________ 4-2

4.1.2 LCD Display ____________________________________________________ 4-2

4.1.3 Cursor Control Arrows ____________________________________________ 4-2

4.1.3 Front Panel Keypad_______________________________________________ 4-2

4.1.5 LED Indicators___________________________________________________ 4-3

4.2 Front Panel Control Screen Menus ____________________________________ 4-5

4.2.1 Main Menus _____________________________________________________ 4-5

4.2.2 Converter Menu Options and Parameters _____________________________ 4-5

4.2.3 Switch Menu Options and Parameters________________________________ 4-6

Table of Contents SFC6400A/SFC1450A Synthesized Frequency Upconverter

viii TM106 –Rev. 1.1

4.2.4 Monitor Menu Options and Parameters _______________________________ 4-8

4.2.5 Alarms Menu Options and Parameters ______________________________ 4-10

4.2.6 System Menu Options and Parameters______________________________ 4-12

4.2.7 Test Menu Options and Parameters_________________________________ 4-16

4.3 Examples: Changing Parameters from the Front Panel___________________ 4-20

4.4 Remote Port User Interfaces________________________________________ 4-22

4.4.1 ASCII Serial Protocol_____________________________________________ 4-23

4.4.1.1 ASCII Command Structure ______________________________________ 4-23

4.4.2 RLLP Serial Protocol_____________________________________________ 4-23

4.4.2.1 RLLP Protocol Structure ________________________________________ 4-23

4.4.2.2 RLLP Protocol Wrapper_________________________________________ 4-24

4.4.2.3 Frame Description and Bus Handshaking___________________________ 4-25

4.4.2.4 Global Response Operational Codes ______________________________ 4-27

4.4.2.5 Collision Avoidance ____________________________________________ 4-28

4.4.2.6 Software Compatibility__________________________________________ 4-29

4.4.2.7 RLLP Summary_______________________________________________ 4-30

4.5 Terminal Port User Interface ________________________________________ 4-31

4.5.1 Terminal Main Menu _____________________________________________ 4-31

4.5.2 Terminal Converter Controls Menu__________________________________ 4-32

4.5.3 Terminal Switch Controls Menu ____________________________________ 4-32

4.5.4 Terminal Alarm Status & Masks Menu _______________________________ 4-33

4.5.5 Terminal Monitor Status Menu _____________________________________ 4-33

4.5.6 Terminal Test Controls Menu ______________________________________ 4-34

4.5.7 SNMP Controls Menu ____________________________________________ 4-34

4.5.8 Terminal Event Buffer Menu _______________________________________ 4-35

4.6 Ethernet Port User Interface ________________________________________ 4-36

4.6.1 Ethernet Port Configuration________________________________________ 4-36

4.6.1.1 Connecting the Terminal ________________________________________ 4-36

4.6.1.2 SNMP Option _________________________________________________ 4-37

4.6.2 Network Configuration____________________________________________ 4-37

4.6.2.1 Terminal Screens______________________________________________ 4-37

4.6.2.2 Logging on and Passwords ______________________________________ 4-37

4.6.2.3 Exiting SNMP Configuration______________________________________ 4-39

4.6.2.4 Logging On___________________________________________________ 4-39

SFC6400A/SFC1450A Synthesized Frequency Upconverter Table of Contents

TM106 –Rev. 1.1 ix

4.6.2.5 Changing the Logon Password ___________________________________ 4-39

4.6.2.6 Logging Off___________________________________________________ 4-39

4.6.2.7 Changing Your Authentication Password ___________________________ 4-40

4.6.2.8 Changing Your Privacy Password _________________________________ 4-40

4.6.2.9 Converter Ethernet Address _____________________________________ 4-40

4.6.2.10 Converter IP Address __________________________________________ 4-42

4.6.2.11 Server Ethernet Address________________________________________ 4-42

4.6.2.12 Server IP Address_____________________________________________ 4-42

4.6.2.13 Router IP Address_____________________________________________ 4-42

4.6.2.14 IP Address Mask _____________________________________________ 4-42

4.6.2.15 Boot Mode (Optional)__________________________________________ 4-43

4.6.2.16 Community__________________________________________________ 4-43

4.6.2.17 Trap Type and Trap Hosts______________________________________ 4-43

4.6.2.18 Trace Mode _________________________________________________ 4-43

4.6.2.19 SNMP V1 & 2 Access View _____________________________________ 4-43

4.6.2.20 Key Generation Mode__________________________________________ 4-43

4.6.2.21 Context Engine ID ____________________________________________ 4-45

4.6.3 Connecting the Ethernet Cable and Testing the Link____________________ 4-46

4.6.3.1 Ping Program_________________________________________________ 4-46

4.6.3.2 SNMP Test___________________________________________________ 4-47

4.6.4 Management Information Base Structure_____________________________ 4-47

4.6.4.1 Simple Network Management Protocol (SNMP) ______________________ 4-47

4.6.4.2 The Management Information Base (MIB)___________________________ 4-47

Section 5 –Rear Panel Interfaces

5.0 SFC Upconverter Connections _______________________________________ 5-1

5.1 Power___________________________________________________________ 5-1

5.2 10 MHz Ref In (J4) _________________________________________________ 5-1

5.3 10 MHz Ref Out (J3) _______________________________________________ 5-1

5.4 Test/Fault (J7) ____________________________________________________ 5-2

5.5 Operator Serial I/O (J8) _____________________________________________ 5-2

5.6 IF Out (J2) _______________________________________________________ 5-3

5.7 Terminal (J6) _____________________________________________________ 5-3

5.8 Ethernet (J9)______________________________________________________ 5-3

Table of Contents SFC6400A/SFC1450A Synthesized Frequency Upconverter

xTM106 –Rev. 1.1

5.9 Equipment RS-485 (J10), Standard Backward Compatible Interface__________ 5-4

5.10 B/U Switch Interface (J5)___________________________________________ 5-5

5.11 RF In (J1) _______________________________________________________ 5-6

5.12 Monitor Ports ____________________________________________________ 5-6

5.12.1 IF Monitor Port__________________________________________________ 5-7

5.12.2 RF Monitor Port_________________________________________________ 5-7

5.13 Optional Chain Switching Module ____________________________________ 5-7

5.13.1 (J10) _________________________________________________________ 5-7

5.13.2 (J11) _________________________________________________________ 5-7

5.13.3 (J12 and J13)___________________________________________________ 5-7

5.13.4 (J14) _________________________________________________________ 5-7

5.13.5 (J16 and J17)___________________________________________________ 5-7

5.13.6 (J18) _________________________________________________________ 5-8

5.13.10 (J19) ________________________________________________________ 5-9

Section 6 -Maintenance and Troubleshooting

6.0 Periodic Maintenance_______________________________________________ 6-1

6.1 Failure Analysis ___________________________________________________ 6-1

6.2 DCE/DTE Operation (DIP Switch S3)__________________________________ 6-1

Section 7 -Technical Specifications

7.0 Introduction_______________________________________________________ 7-1

7.1 Output Characteristics______________________________________________ 7-1

7.2 Input Characteristics _______________________________________________ 7-1

7.3 Transfer Characteristics ____________________________________________ 7-1

7.4 Frequency Synthesizer Characteristics ________________________________ 7-3

7.5 Single Side Band Phase Noise _______________________________________ 7-3

7.6 Operator Interface _________________________________________________ 7-3

7.6.1 Converter Settings _______________________________________________ 7-3

7.6.2 Switch Settings __________________________________________________ 7-4

7.6.3 LED Indicators___________________________________________________ 7-4

7.7 Physical Characteristics ____________________________________________ 7-4

7.8 Environmental Characteristics________________________________________ 7-4

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Radyne ComStream Convertitore multimediale

Radyne ComStream

Radyne ComStream TIERNAN SE4000 Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente