Raisecom ISCOM HT803G-V (T) Manuale utente

ISCOM HT803G-V (T)

UserManual

www.raisecom.com

1 Safety statements

1.1 Basic requirements

Read this document carefully before installing and using the ISCOM

HT803G-V. Otherwise, severe bodily injury or device damage may be

caused. Raisecom Technology Co., Ltd. (hereinafter referred to as Raisecom)

will not be liable for any losses caused by violation of any safety issues.

The ISCOM HT803G-V is an integrated device with precision components.

To prevent device damage caused by severe shock, avoid collision and

vibration. You shall not disassemble or repair the ISCOM HT803G-V by

yourself. If necessary, follow Raisecom engineers' instructions.

1.2 Environmental requirements

Place the device in an environment with good ventilation and no direct

exposure to strong light.

Keep the device clean and away from dust, water, and moist areas.

Do not place any object on the device to avoid damage due to overheating or

compressional deformation.

When installing the device, keep it away from heat or fire sources, such as

the electric heater and candle.

When installing the device, keep it away from electric appliances with

strong magnetic field or electric fields, such as the microwave oven and

refrigerator.

1.3 Electric safety

Use the original power adapter included in the package or replacement

provided by Raisecom. Using other power adapters may cause device

damage or other problems.

The voltage and current of the power supply must meet requirements on

input voltage and current. Overcurrent protection is required.

Keep the power plug clean and dry to avoid electric shock or other risks.

Before pulling out a cable from the device, stop using the device and power

it off.

If you do not use the device for a long time, power it off and pull out the

power plug.

Do not let water or other liquid flow into it. If this happens, power off the

device immediately, pull out all cables from the device, and contact

Raisecom technical support personnel.

1.4 Laser safety

Personnel operating the fiber must be trained on laser safety.

Do not bend the fiber much to make its diameter smaller than 7.5 cm or 3

inches. Otherwise, the fiber may be damaged or optical signals may be

blocked.

Do not stare into the optical interface or end face of the fiber to avoid eye

injury.

1.5 Other precautions

If any abnormality occurs, such as smoking, abnormal sound, and peculiar

smell, stop using the device immediately, power it off, pull out all cables

from it, and contact Raisecom technical support personnel.

Do not let any object (such as metal) enter the device through heat

dissipation holes.

Do not scrape or abrase the device shell. Otherwise, falling coating may

cause device malfunction (even short circuit if entering the device) or

human allergy.

Do not let children play with the device or components to avoid dangers

caused by swallowing, and so on.

2 Legal notice

The copyright of this document is owned by Raisecom. No part of this publication

may be excerpted, reproduced, translated or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without written

consent from Raisecom Technology Co., Ltd.

When a user finishes installing the device and starts using it, it implies that

the user has completely understood safety statements of this device. The

user is liable for any losses or damage caused by violation of safety

statements.

The information in this document is subject to change without notice. Every

effort has been made in the preparation of this document to ensure accuracy

of the contents, but all statements, information, and recommendations in this

document do not constitute the warranty of any kind, express or implied.

Raisecom is not liable for any losses or damage caused by natural disasters

beyond Raisecom's responsibilities, such as earthquake and flood.

3 Device specifications

3.1 Technical specifications

Table 3-1 lists technical specifications of the ISCOM HT803G-V.

Table 3-1 Technical specifications of the ISCOM HT803G-V

Parameter

Description

Dimensions

140 mm (Length) × 105 mm (Width) × 33

mm (Height)

Weight

< 1 kg

Maximum power consumption

< 5 W

Input of the power adapter

100–240 VAC (50/60 Hz)

Output of the power adapter

12 VDC, 1 A

Operating temperature

0–50°C

Operating humidity (RH)

10%–93% (non-condensing)

Table 3-2 lists technical specifications of the PON interface on the ISCOM

HT803G-V.

Table 3-2 Technical specifications of the PON interface

Parameter

Description

Interface type

SC/APC

Tx optical power

0–4 dBm

Rx sensitivity

-28 dBm

Minimum overload

-8 dBm

Laser safety class

Class 1

3.2 Packing list

Table 3-3 lists packing list of the ISCOM HT803G-V.

Table 3-3 Packing list

Device/Component

Quantity

ISCOM HT803G-V

Power adapter

Ethernet cable

User manual

If any item mentioned above is missing, contact the SP.

4 LEDs

5 Connection and usage

5.1 Interfaces and buttons

The figure shown above is diagrammatic only. The actual

appearance is subject to the device provided by the SP.

Warranty Record

Date

Record of Damage and

Repair

Signature

of Repair

man

Signature of

Customer

Damage

Reason

Repair

Measure

Address: East-11, Raisecom Building, 10 Xi Bei Wang East Road, Haidian District, Beijing, China

Post Code: 100094

Tel: +86-10-82883305

www.raisecom.com

-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - ----------------------------------------------------------------------

Product Warranty Sheet

Customer Name:_ _ _ _ _ _ _ _ _ _ _ Phone Number:_ _ _ _ _ _ _ _ _ _ _ _ _ _

Address:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Thank you very much for purchasing Raisecom products. For the sake of being

responsible for you, and guaranteeing premium after-sale service, please carefully

read and fill up this sheet.

Warranty Policy:

1. Our products carry a type warranty period of 1 year after warranty sheet has

been provided to you. In this period, any problem that caused by the product

itself and confirmed by our technical engineers will be fixed free of charge.

2. Please present the warranty sheet and the receipt when requesting services.

3. The following circumstances are not included in the warranty:

Products are misused, or used in abnormal situations.

Damages that are attributable to improper installation, disassembly or

repairing by unauthorized parties.

Product serial number and the number on receipt are amended without

permission.

Damages caused by natural disasters or human behaviors.

Product has been exceeded warranty period.

Damages that are attributable to use the components that are not Raisecom's.

Damages caused by accident or man factor, include: Computer Viruses,

Improper Carry, Extrusion, Kotow, Scuffing, Bump, High-temperature,

Inputting improper voltage, Cauterization, etc.

Damages caused by irresistible power (for instance: Earthquake, Flood and

etc). Other damages which are not attributable to product design, technology,

product, and quality.

4. We are providing lifetime repairing services to our products. Repairing

outside the warranty period will be charged of the cost.

-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - --------------------------------------------------------

-------------

5.2 Installation modes

The ISCOM HT803G-V can be installed on a stable workbench or a wall.

Installing the ISCOM HT803G-V on the workbench is informal

because unpredictable events (such as collision or object falling)

may prevent the ISCOM HT803G-V from working properly or

even damage it. We recommend installing it on a wall.

Install the ISCOM HT803G-V on a wall as below:

Step 1 Choose a proper height of installation position so that you can easily

observe LEDs and connect the power supply.

Step 2 Knock two cement nails, with spacing of 110 mm (distance between two

wall-mount holes), into the wall. The diameter of a cement nail should

be smaller than that of the wall-mount hole (8 mm).

Step 3 Align wall-mount holes with knocked cement nails, and hang the device

on nails. The device is hung by the nails on the wall.

Figure 5-1 Wall-mount installation

Step 4 Check by slightly shaking the device whether it is firmly installed on the

wall.

Indice

Altri manuali Raisecom Hardware di rete

Raisecom

Raisecom ISCOM2828F Manuale utente

Raisecom

Raisecom ISCOM2608G-2GE Specifiche tecniche

Raisecom

Raisecom ISCOM6820-GP Manuale utente

Raisecom

Raisecom ISCOM6820-GP Manuale utente

Raisecom

Raisecom ISCOM6860 Manuale utente

Raisecom

Raisecom iTN2100 Guida

Raisecom

Raisecom RC1201-2GE16E1T1 Manuale utente

Raisecom

Raisecom ISCOM6860 Manuale utente

Raisecom

Raisecom ISCOM5508 Guida

Raisecom

Raisecom Gazelle S2028i Manuale utente

Raisecom

Raisecom Gazelle S1512i-4GF-8GE-PWR Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente