Ramsey Electronics FMA200 Manuale utente

(7) Upper Element

(8) Lower Element

(10) Radial w/ Nut

(11) Screw

w/ Sp. W asher

(1) Base Coil

M-J Connector

M-P Connector

(4) U-Bolt

W asher

& Nut

(3) Mounting

Bracket

Your Mast

(2) Mounting

Support Pipe

(5) Hex Bolt

(6) Hex Bolt

& Washer

Your Coax

(9) Hose Band SPECIFICATIONS

•Frequency: 88-110 MHz

•Gain: 3.4dBi

•VSWR: Less than 1.5:1

•Max Power: 200 Watts

•Length: 7’ 7”

•Weight: 2.4 Lbs

•Available Mast: 1” - 2 7/16” OD

PARTS LIST

001 Base coil 1

002 Mount support pipe 1

003 Mount bracket 2

004 U-Bolt with hardware 2

005 Hex bolt 2

006 Hex bolt w/washer 1

007 Upper element 1

008 Lower element 1

009 Hose band 1

010 Radial arm w/nut 3

011 Screw w/spring washer 2

FMA200

5/8 Wave FM Broadcast Antenna

ANTENNA ASSEMBLY

1. First, assemble the Upper Element and the Lower

Element with the hose band. Then attach the ele-

ment assembly to the Base Coil as shown.

2. Attach the (3) ground plane radials to the Base Coil

as shown. Lock them in place with lock nuts.

3. Assemble and attach the (2) mounting brackets to

the Support Pipe as shown. Run your coax up

through the Support Pipe and attach to the connec-

tor at the base of the coil (Standard PL-259 connec-

tor).

4. Adjust (Tune) the top element length (tip of the Up-

per Element to the top of the Lower Element) to

your operating frequency, according the Frequency

Tuning Chart.

5. Finally, mount the assembled antenna on your mast

using the two U-Bolt assemblies provided with the

Mount Brackets

FREQUENCY TUNING

FREQ LENGTH APPROX.

87 MHz 41

88 MHz 39 5/16

89 MHz 37 5/8

90 MHz 36”

91 MHz 34 5/8”

92 MHz 32 11/16”

93 MHz 31 1/2”

94 MHz 30 1/2”

95 MHz 28 1/2”

96 MHz 27 3/4”

97 MHz 26 9/16”

98 MHz 25 3/8”

99 MHz 24 1/16”

100 MHz 23 1/4”

101 MHz 22 7/16”

102 MHz 21 5/8”

103 MHz 20 3/8”

104 MHz 19 5/16”

105 MHz 18 1/8”

106 MHz 17 5/16”

107 MHz 16 1/8”

108 MHz 15 3/16”

109 MHz 14 3/16”

110 MHz 13”

“Hose Band” Model

- Hose Band (9) is used to affix the

‘Upper’ and ‘Lower’ antenna elements.

(7) Upper Element

(6) H ex Bolt

& Washer

(8) Lower Element

(10) Radial w/ Nut

(11) Screw

w/ T. Washer

(1) Base Coil

M-J Connector

M-P Connector

(4) U-Bolt

W asher

& Nut

(3) Mounting

Bracket

Your Mast

(2) Mounting

Support Pipe

(5) Hex Bolt

& Nut

(6) Hex Bolt

& Washer

Your Coax

(9) Ring Clamp SPECIFICATIONS

•Frequency: 88-110 MHz

•Gain: 3.4dBi

•VSWR: Less than 1.5:1

•Max Power: 200 Watts

•Length: 7’ 7”

•Weight: 2.4 Lbs

•Available Mast: 1” - 2 7/16” OD

PARTS LIST

001 Base coil 1

002 Mount support pipe 1

003 Mount bracket 2

004 U-Bolt with hardware 2

005 Hex bolt w/ nut 2

006 Hex bolt w/ washer 2

007 Upper element 1

008 Lower element 1

009 Ring clamp 1

010 Radial arm w/nut 3

011 Screw w/ toothed washer 2

FMA200

5/8 Wave FM Broadcast Antenna

ANTENNA ASSEMBLY

1. First, assemble the Upper Element and the Lower

Element with the ring clamp. Then attach the ele-

ment assembly to the Base Coil as shown.

2. Attach the (3) ground plane radials to the Base Coil

as shown. Lock them in place with lock nuts.

3. Assemble and attach the (2) mounting brackets to

the Support Pipe as shown. Run your coax up

through the Support Pipe and attach to the connec-

tor at the base of the coil (Standard PL-259 connec-

tor).

4. Adjust (Tune) the top element length (tip of the Up-

per Element to the top of the Lower Element) to

your operating frequency, according the Frequency

Tuning Chart.

5. Finally, mount the assembled antenna on your mast

using the two U-Bolt assemblies provided with the

Mount Brackets

FREQUENCY TUNING

FREQ LENGTH APPROX.

90 MHz 41 11/16”

91 MHz 40 5/8”

92 MHz 39 3/8”

93 MHz 38 3/16”

94 MHz 37”

95 MHz 35 13/16”

96 MHz 34 5/8”

97 MHz 33 1/2”

98 MHz 32 5/16”

99 MHz 31 1/2”

100 MHz 29 7/8”

101 MHz 28 11/16”

102 MHz 27 5/8”

103 MHz 26 13/16”

104 MHz 25 5/8”

105 MHz 24 13/16”

106 MHz 23 5/8”

107 MHz 22 13/16”

108 MHz 21 11/16”

109 MHz 20 7/8”

110 MHz 19 11/16”

“Ring Clamp” Model

- Ring Clamp (9) is used to affix the

‘Upper’ and ‘Lower’ antenna elements.

Altri manuali Ramsey Electronics Antenna

Ramsey Electronics

Ramsey Electronics WSR-ANT Guida utente

Ramsey Electronics

Ramsey Electronics DAP25 Manuale utente

Ramsey Electronics

Ramsey Electronics AA7 Manuale utente

Ramsey Electronics

Ramsey Electronics The `Logi' Log Periodic Antenna LPY915 Guida utente

Ramsey Electronics

Ramsey Electronics DA-80 Manuale utente

Ramsey Electronics

Ramsey Electronics DA25 Manuale utente

Ramsey Electronics

Ramsey Electronics TM100 Manuale utente

Ramsey Electronics

Ramsey Electronics Dipole Antenna DA-1 Guida utente

Ramsey Electronics

Ramsey Electronics DA-160 Istruzioni per il montaggio

Ramsey Electronics

Ramsey Electronics AA7B Manuale utente

Ramsey Electronics

Ramsey Electronics DA-40 Manuale utente

Ramsey Electronics

Ramsey Electronics WSA2M Manuale utente

Manuali Antenna popolari di altre marche

Alfa Network

Alfa Network APA-L01 Manuale utente

Naval

Naval PR-422CA Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuale utente

TERK Technologies

TERK Technologies TV44 Manuale utente

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuale utente

HP J8999A Manuale utente

MobilSat

MobilSat MSP-S Manuale utente

Steren

Steren ANT-UHF 13 Manuale utente

Novatel

Novatel 600-G Manuale operativo

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuale utente

TRENDnet

TRENDnet TEW-AO12O Manuale utente

Radio Shack

Radio Shack 15-1837 Manuale utente

CommScope

CommScope CMAX-OMFX-43M-I53 Manuale utente

COBHAM

COBHAM SAILOR 800 VSAT Manuale per l'uso e la cura

Trango Systems

Trango Systems AD900-9 Manuale utente

Steren

Steren ANT-100 Manuale utente

Proxim

Proxim 5054-PA-23 Manuale utente

IWCS

IWCS iriBelt II Guida all'installazione