RAMTONS RM/476 Manuale utente

FAN HEATER

MODEL: RM/476

READ AND SAVE THESE INSTRUCTIONS

Version 1.0 2015

Attention: Pictures in the IM are for reference only.

GD Midea Environment Appliances MFG. Co.Ltd.

No.28,Dong Fu Road,HeSui East Industrial Area,Dong Feng Town,

ZhongShan,GuangDong,China.

OWNER’S MANUAL

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety

precautions should always be followed, including the

following:

1. To ensure Familiarity with the controls, safety features,

and operation of your heater -Read all instructions before

using.

2. Do not insert foreign objects through the intake or

discharge grilles.

3. This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

4. Disconnect the cord from the outlet before cleaning. A

heater should never be used under conditions where it

may be immersed, or come in contact with water.

Similarly do not plug in your heater if its surfaces are

damp.

5. Do not use the appliance on the same socket or electric

circuit with other electrical appliances so as to prevent

the circuit from being overloaded, which will cause fire.

Please do not prolong the power cords by yourself or use

movable socket.

6. Unplug heater by grasping plug and pulling it from the

outlet. NEVER YANK ON CORD.

7. If the supply cord is damaged, it must be replaced by its

service agent or a similar qualify person in order to avoid

hazard.

8. Do not use in locations when the heater will be left

unattended for long periods of time. (for example -

several weeks in an unoccupied summer cottage)

9. Do not use attachments not recommended and sold by

MIDEA distributor.

10. Loose connections between the heater plug and the

electrical outlet may cause the plug to overheat.

11. Ensure no other appliances are plugged into the same

circuit as your heater. A circuit overload could occur

resulting in dimmed lights, blown fuses, tripped circuit

breakers, or fire hazard.

12. The heater is intended for household indoor use only.

13. The heater must not be located immediately below a

socket-outlet.

14. Warning: In order to avoid overheating, do not cover

the heater.

15. The heater is to be installed so that switches and other

controls cannot be touched by a person in the bath or

shower.

16.

17. Children of less than 3 years should be kept away unless

continuously supervised. Children aged from 3 years and

less than 8 years shall only switch on/off the appliance

provided that it has been placed or installed in its intended

normal operating position and they have been given

Correct Disposal of this product

This marking indicates that this product should not be disposed with

other household wastes throughout the EU. To prevent possible

harm to the environment or human health from uncontrolled waste

disposal, recycle it responsibly to promote the sustainable reuse of

material resources. To return your used device, please use the return

and collection systems or contact the retailer where the product was

purchased. They can take this product for environmental safe

recycling.

supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

Children aged from 3 years and less than 8 years shall

not plug in, regulate and clean the appliance or perform

user maintenance.

18. CAUTION — Some parts of this product can become

very hot and cause burns. Particular attention has to be

given where children and vulnerable people are present.

19. The heater must be installed at least 1.8m above the

floor.

WARNING: IN ORDER TO AVOID OVERHEATING,

DO NOT COVER THE HEATER.

Power swicth knob

Thermostat knob

Pilot lamp

Air outlet grille

Drill 2 holes into the wall with the horizontal distance of 18.5cm，insert a expansion

plugs and a bolt into each hole.The explored length of the bolts should be over

30mm.

Hang the heater on the wall by the bolts, and make sure that the holes of the

heater’s rear cover can match the bolts firmly.

INSTALLATION

OPERATING INSTRUCTIONS

18.5cm 18.5cm

3. Set the power switch to LOW position for fast warm up of a room. Once the room

is Comfortable, select a lower setting to reduce electrical consumption and to

prevent the room from becoming too warm.

4. Adjust the thermostat to maximum and select the desired power setting. Once

the room is comfortable, rotate the thermostat counterclockwise, until the heater

shuts off. The thermostat will now maintain the temperature by cycling the heater

on or off. During particularly cold weather, the low power setting may be

insufficient to satisfy the thermostat. Select a higher setting for these periods.

1. Plug into any 220-240VAC, 50Hz source (see important safeguards section

3.3 regarding use of extension cords).

2. Your heater is equipped with a 3-position power switch:

OPERATING INSTRUCTION

FUNCTION

POWER OFF

FAN ONLY

1200 WATTS

2000 WATTS

SYMBOL

OFF

LOW

HIGH

Attention:

1. The holes of the wall and the holes of the heater’s rear cover should be on the

same horizon line.

2. Keep the distance between flank wall and the heater more than 50CM, and there

is no other blockings within the distance of 60CM above and below the heater, in

order to make the heating air ventilate.

3. The mounting height should be more than 180CM.

4. When used near bathroom or swimming pool, do not drop the unit into bathtub or

swimming pool.

5. The mounting position should be far away from bathtub, shower nozzle and

swimming pool, and make sure that people in the area of bathtub or shower

could not reach the power switch or control device of the unit.

Your heater is fitted with a safety device "Double Protector" that (1) switches off

the heater by thermal cut-off in the event of overheating or malfunction, It will

reset while the temperature reduce to a normal level. (2) Shuts off the heater by

thermal fuse in the event of overheating or malfunction and not operates by some

other accidental reason.

If overheating or malfunctions continue, return the heater to an Approved Service

Agent for examination.

The most common cause of overheating is deposits of dust or fluff entering the

heater, Ensure these deposits are removed regularly by unplugging the unit and

vacuum cleaning air vents and front grille.

SAFETY CONTROL

1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe

the exterior surfaces of the heater occasionally with a cloth moistened (not

dripping wet) with a solution of mild detergent and water. Dry the case

thoroughly with a soft dry cloth before operating the heater.

2. The fan motor is lubricated by the factory, and will require no further lubrication.

3. No other user maintenance is required or recommended. If service is required,

send your heater to the nearest authorized service depot.

4. Store heater in a clean and dry place when not in use.

REMEMBER - portable electric heaters are designed for spot heating, or as a

supplementary heat source. They are not intended to be main sources of heat

during the normal heating season.

Note: There may be trace of smoke or odour when unit is first operated. Do not

be alarmed. This indicates that a drop of oil fell on the heating coil during the

manufacturing process. It will quickly evaporate, and should not re-occur.

READ AND SAVE THESE INSTRUCTIONS

CLEANING AND MAINTENANCE

This fan heater is equipped with a pilot light that glows whenever the heater is

plugged in and turned on. It will continue to glow even if the thermostat has cycled

the heating elements off. This feature is to prevent you from being unaware that

the heater is operating and maintaining the temperature of the room.

When you do not wish the heater to control the room temperature, turn the control

switch to O (off) and remove the plug from the electrical outlet.

PILOT LIGHT

Indice

Altri manuali RAMTONS Stufa

RAMTONS

RAMTONS RM/475 Manuale utente

Manuali Stufa popolari di altre marche

oventrop

oventrop Regucor Series Manuale utente

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuale utente

ELMEKO

ELMEKO ML 150 Manuale utente

BN Thermic

BN Thermic 830T Manuale utente

KING

KING K Series Guida

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guida rapida

Well Straler

Well Straler RC-16B Manuale utente

EUROM

EUROM 333299 Manuale utente

Heylo

Heylo K 170 Manuale utente

Eterna

Eterna TR70W Manuale utente

Clarke

Clarke GRH15 Manuale di istruzioni

IRSAP

IRSAP The Radiator Company Ovali Manuale utente

Empire Heating Systems

Empire Heating Systems WCC65 Manuale utente

Wetekom

Wetekom 92 86 43 Manuale utente

Desa

Desa SPC170-F Manuale utente

Watlow

Watlow Watrod Electric Tubular Heaters Manuale utente

Haverland

Haverland ECO-DRY GPS Series Manuale elenco delle parti

Stelpro

Stelpro ASILVC2060 Series Manuale utente