Rangevision SPECTRUM Manuale per l'uso e la cura

RANGEVISION

Setup and calibration

SPECTRUM

Contents
Contents 2
Introduction 3
Technicalspeciﬁcations 4
3Dresolution 4
Systemrequirements 4
Preparingforwork 5
Packagecontents 5
Installingsoftwareanddrivers 7
Settingupyourcomputerforworkwiththe scanner 8
Connectingprojector 8
Conﬁguringcomputerparameters 9
ScannerAssembly 10
Scannersetup 11
ScanCenterNGlaunch 11
Selectscanningzone 12
Calibrationﬁeldparameters 13
Placingthecalibrationplate 13
Initialsetupofcamerasandlenses 14
Checkingcameraarrangement 15
Findingaworkingdistance 15
Adjustmentoftheprojectorfocus 16
Bringingthecamerastogether 16
Finalcalibrationofthecameras 17
Calibratingthescanner 21
Calibrationplate 21
Fullcalibration 23
Fastcalibration(orientation) 25
Focus assessment during calibration 27
2

Introduction

ThankyouforchoosingRаngeVisiоnSpectrum!

PleasereadthismanualbeforeusingRangeVision3Dscanner.Herearedescribed the

procedures for preparing the scanner, installing the required drivers, calibration

procedure, scanning procedure,andtipsforacquiringhigh-quality three-dimensional

object model.

Informationmaybeamendedfromtimetotime.Thesechangeswillbeinserted into the

new versionsofthemanual,orintheadditionaldocumentsandpublications.

Technicalspeciﬁcations

Scanningzone

Scanning Area (WxHxD) (mm)

520*400*400

320*250*220

120*90*100

3Dpointaccuracy

0.12mm

0.06mm

0.04mm

Model

Spectrum

Resolutionofcameras

3Mpix

Diagonalofthematrix

1/2”

Texturescanning

Yes

3Dresolution

Scanningzone

3Dresolution

0.25mm

0.15mm

0.06mm

Operationdistance

1.05m

0.6m

0.3m

Systemrequirements

●operatingsystem-Windows7/8/1064bit,

●processor-IntelCorei3/i51.8GHzandbetter,

●graphicscardwithHDMIoutput,

●RAM-Notlessthan8GB,

●3 USB-ports.

Preparingforwork

Packagecontents

RаngeVisiоn3Dscannerissuppliedinaprotectedroadhardcase.Cameratripodis

placedinaseparatebag.

Thescannerisequippedwiththreescanningareas.Scanningareaisacalibrationplate

andstandforthecalibrationplate.

№

Name

qty.

Scanning module:

Installation construction with projector

Cable kit for connection to a PC (2 USB + HDMI)

Machine vision camera

Tripod

Calibration plate

Kit of optics

Stand for the calibration plate

USB disk with the software

License dongle

Power Cord 5 m

USB hub

Hex key

Rotary table + cables

Installingsoftwareanddrivers

Get the RаngeVisiоn software (equipped with the scanner) and run the installer -

RаngeVisiоn SсаnCenter setup.

Followingtheprompts,selectthedesiredlanguage,typeandpathforinstallation.

Aftertheﬁleshavebeencopiedinstalldriversandgraphicslibraries,necessaryfor

thecorrectoperationofRangeVision3Dscanner.

If you have access to the Internet RangeVision ScanCenter NG will automatically notify

you when updates are available. You can check for updates manually by clicking

About → Check for Updates.

Settingupyourcomputerforworkwiththe scanner

ForthecorrectoperationofRаngevisiоn3Dscanneryouwillneedtosetupyour

computer. Thisprocedureisperformedoncebeforetheﬁrstuseofthescanner.

Connectingprojector

TurnontheprojectorandconnectittotheHDMI-portofyourvideocard.After

connecting the projector,itshouldbedisplayedinthesystem.Ifthecomputer has

several videooutputs,deﬁnetheonetobeused.

1. Right click on the desktop, select Screen resolution,

2. Makesurethattheprojectorhasbeensuccessfullyrecognizedbythesystem

andthatbothconnectedscreensaredisplayed.

Conﬁguringcomputerparameters

Toavoidarecurrenceoftheproblemsduringthescanneroperation,youmustturn off

the screensaverandsleepmode.

Byclickingrightmousebuttononthedesktop,selectPersonalize→Screensaver and

turn off thescreensaver,disableturningoffthedisplayandputtingthe computer in sleep

mode.

ScannerAssembly

1. Mountthecamerasonthescanningmodule.

2. Installthescanningmoduleontripod.

3. ConnecttheprojectorwithHDMIcable.

4. ConnectcameraswithUSBcables.

5. Connectpowersupplyandturnontheprojector.

*old color variant with identical speciﬁcations is pictured

Altri manuali per SPECTRUM

Indice

Altri manuali Rangevision Scanner

Rangevision

Rangevision Smart Manuale utente

Rangevision

Rangevision Standard Plus Manuale utente

Rangevision

Rangevision SMART ScanCenter 2016.2 Manuale utente

Rangevision

Rangevision Smart Guida alla risoluzione dei problemi

Rangevision

Rangevision NEO Manuale per l'uso e la cura

Rangevision

Rangevision NEO Manuale per l'uso e la cura

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente