Ravas RVL RF Manuale utente
USER MANUAL – RVL RF 1
USER MANUAL
RVL RF
We would like to inform you about the fact that this RAVAS product is 100% recyclable on the basis
that the parts are processed and disposed of in the right manner.
More information can be found on our website www.ravas.com.
Rev.20181008
Printing/typographical errors and model changes reserved
USER MANUAL – RVL RF 2
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
If you have any queries concerning the duration and terms of the guarantee, please contact your
supplier. We would also refer you to our General Sale and Supply Conditions, which are available on
request.
The manufacturer accepts no liability for any damage or injury caused by failure to follow these
instructions, or from negligent operation or assembly, even if this is not expressly stated in this
instruction manual.
In light of our policy of continuous improvement, it is possible that details of the product may differ
from those described in this manual. For this reason, these instructions should only be treated as
guidelines for the installation of the relevant product. This manual has been com- piled with all due
care, but the manufacturer cannot be held responsible for any consequences of errors. All rights
are reserved and no part of this manual may be reproduced in any way.
USER MANUAL – RVL RF 3
Table of contents
page
1. Introduction 4
2. Warnings & Safety measures 4
3. System setup 5
3.1 Installing the indicator 5
3.2 Placing battery pack in the RVL RF 6
3.3 Switching on the RVL RF 6
3.4 Switching on indicator 7
3.5 Switching off the system 7
4. Changing the battery 8
4.1 Low battery indication RVL RF 8
4.2 Charge the battery pack of the RVL RF 8
4.3 Changing the batteries of the indicator 9
5. Use 10
5.1 Use (accurate weighing) 10
5.1.1 zero check before a weighing 11
5.2 Level correction 11
5.3 Establish Bluetooth communication and weigh! 12
5.4 Auto shut-off indicator 13
5.5 Indicator functions 14
5.6 Error messages 16
5.7 Gross / tare / net weight 17
6.8.1 Net weighing: automatic tare 17
6.8.2 Net weighing: manual tare PT 19
5.8 Adding and reset 22
5.9 Changing the time and date (on the printout) 23
5.10 KG-LB switch 26
5.11 User settings 27
USER MANUAL – RVL RF 4
IP65
1. Introduction
This manual describes the installation and use of the RVL RF. Read this manual carefully. The installer
must be informed of the contents of this manual. Follow the contents of the manual precisely. Always
do things in the correct order. This manual should be kept on a safe and dry place.
In case of damage or loss the user may request a new copy of the manual from RAVAS.
2. Warnings & Safety measures
When using the RVL RF, please observe the instructions and guidelines
contained in this manual carefully. Always perform each step in
sequence. If any of the instructions are not clear, please contact RAVAS.
- All safety regulations that apply to the truck remain valid and unchanged
- No weighing operations are allowed if any persons or objects are in the vicinity; around, under
or close to the load.
- RAVAS is not responsible for any physical harm done to the operator because of the presence
of the indicator in the cabin.
- Any modifications done to the system must be approved in writing by the supplier, prior to any
work being completed.
- It is the sole responsibility of the purchaser to train their own employees in the proper use and
maintenance of this equipment.
- Do not operate this unit unless you have been fully trained in its capabilities.
- Check the accuracy of the scale on a regular basis to prevent faulty readings.
- Only trained and authorized personnel are allowed to service the scale.
- Always follow the operating, maintenance and repair instructions of this truck and ask the
supplier when in doubt.
- RAVAS is not responsible for errors that occur due to incorrect weightings or inaccurate
scales.
Should you have any further questions after reading this manual then you can contact us at:
RAVAS Europe B.V.
Toepadweg 7
Postbus 2023
5300 CA Zaltbommel
Nederland
Phone: +31 (0)418-515220
Fax: +31 (0)418-515320
Internet: www.ravas.com
Changes reserved
READ
CAREFULLY
min -10°C
15°F
00
max 40°C
105°F
USER MANUAL – RVL RF 5
3
2
1
S13
1.
2.
S5
3.
System setup
3.1 Installing the indicator
Find a suitable position for the indicator:
1. at the cabin’s roof.
2. on the right side of the cabin, mounted onto a side-rail.
3. on the dashboard.
Installation of the indicator bracket & support
The indicator should be easy
to reach and read out!
USER MANUAL – RVL RF 6
3.2 Placing the battery pack in the RVL RF
1. Release the locking clip on the battery holder.
2. Click the battery pack into the battery holder.
3. Push the locking clip up to secure the battery pack.
3.3 Switching on the RVL RF
2. The blue LED on the
RVL RF will start blinking
automatically.
1. Switch on the RVL by pressing
the blue button on the
battery pack holder.
USER MANUAL – RVL RF 7
3.4 Switching on the indicator
3.5 Switching off the system
e1 e2 e3 F1 F2
NET
ID CODE PT TOTAL PCS KG/LB
CLR
e1 e2 e3 F1 F2
NET
ID CODE PT TOTAL PCS KG/LB
CLR
Start up the
indicator. Press
the on/off key.
e1 e2 e3 F1 F2
NET
ID CODE PT TOTAL PCS KG/LB
CLR
5 sec.
1
Switch off the
indicator by
pressing the
on/off key for 3
seconds.
1
e1 e2 e3 F1 F2
NET
ID CODE PT TOTAL PCS KG/LB
CLR
2
Weigh!
USER MANUAL – RVL RF 8
4
. Changing battery
4.1 Low battery indication RVL RF
Exchangeable battery pack supplies power to the RVL RF .
When the voltage level of the battery pack is running low, the low bat indicator will light up and “F1” will
start blinking in the display.
The blue LED on the bluetooth module will start blinking very slowly (twice every 10 sec). The RVL RF
will switch off automatically after 10 minutes.
4.2 Charge the rechargeable battery pack (option)
The system is equipped with a rechargeable battery pack and a smart charger. Charge the battery for
8 hours. This will prevent loss of battery capacity.
First position the battery pack inside the charger module, then plug the adaptor into the mains voltage.
Smart charger: When the battery is being charged, the red LED on the charger is lit. After at least 8
hours charging, the charger shuts off and the the batterypacks are completely full. The red LED turns
off and the green LED will illuminate.
FUNCTIONALITY BLUE LED
DURING POWERING ON ON for 5 sec.
FULL BATTERY Blink time interval
Working mode Once every 1,5 sec.
Sleep mode Once every 4 sec.
LOW BATTERY
Working mode Twice every 10 sec.
Sleep mode Twice every 10 sec.
Charger unit
USER MANUAL – RVL RF 9
Remove the battery cover of the indicator
housing by tightening the
screw counter-clockwise.
4.3 Changing the batteries of the indicator
The indicator is equipped with 4 AA batteries.
Remove the battery holder
and remove the empty batteries.
Place new batteries in
the battery holder and
place the battery holder
in the housing.
Close the battery cover of the
indicator housing and lock by partly
unscrew clockwise.
Replace batteries as soon as the
low bat indicator starts blinking.
e1 e2 e3 F1 F2
NET
ID CODE PT TOTAL PCS KG/LB
CLR
Be sure the batteries are positioned
correctly. Watch for the polarity!
1.
2.
1. 2.
1.
2.
1.
2.
4 x AA
2 1
3 4
5
USER MANUAL – RVL RF 10
5. Use
5.1 Use (accurate weighing)
OK
0
max 40°C
105°F
min -10°C
15°F
0
M1
M1
3 - 5 min.
After 3 to 5 minutes the load cells have reached the
operational temperature. Don’t lift loads before the
zero-point correction has been executed.
Indice
