Raz Design EZPZ-AT Manuale utente

RTD079ENr01 Rev. Date: 2023-05-02

Mobile Shower

Commode Chairs

EZPZ-AT

(

Z30

)

User and Dealer

Manual

BASIC UDI-DI: 628758RAZDESIGNINC2004V9

RTD079ENr01 Rev. Date: 2023-05-02

THIS DEVICE IS SUITABLE FOR TYPE A

HIGH USAGE

(

e.g.

INSTITUTIONS

)

AND SHOULD NEVER

BE USED FOR ANY PURPOSE

OTHER THAN ORIGINALLY INTENDED

It is important that the EZPZ-AT Mobile Shower Commode Chair be properly

assembled and that all adjustments be made carefully. Please ensure that the

user(s), dealer(s) and attendant(s) have read this manual and thoroughly

understood the safe operation of the EZPZ-AT Shower Chair. Up-to-date

manuals are available online at www.razdesigninc.com. For clarification of any

section of this manual, contact your distributor or the manufacturer.

MANUFACTURER

U.S.A. AND WORLDWIDE

Raz Design Inc.

135 Railside Rd. Toronto, ON, Canada, M3A 1B7

1.877.720.5678 / 416.751.5678

info@razdesigninc.com

CHAIR CLASSIFICATION BASED ON MAXIMUM USER WEIGHT

EZPZ-AT 150 Kg (331 lbs)

Forward Stability

The casters on all models are equipped with dual-locks. The step-on pedal

activates both the roll lock and the swivel lock. It is essential that all casters

on the shower chair be in an outward position before engaging the locks for

optimal forward and lateral stability. If so equipped, disengage the optional

directional caster lock before rotating the rear caster to the rearward position

and applying the caster’s dual-locks.

USERS MUST NOT lean forward while sitting in the EZPZ-AT

Mobile Shower Commode Chair as this may cause the chair to tip

forward.

USERS MUST NOT wheel down a ramp without an attendant who

can hold onto the chair during the descent.

CASTER LOCKS ARE NOT BRAKES! Never use caster locks to slow

down the shower chair when descending inclines as this could cause the

chair to tip in the direction of travel.

SAFETY I

Fail

ause

SAFETY WARNINGS TO CONSIDER FOR USER PURPOSES

RTD079ENr01 Rev. Date: 2023-05-02

Lateral Stability

USERS MUST NOT lean over the edge of an EZPZ-AT Mobile

Shower Commode Chair as this could cause the chair to tip.

USERS MUST NOT attempt to pick up objects from the floor by

leaning over and reaching – use a reacher or ask for assistance from

an attendant.

USERS MUST NOT position the EZPZ-AT Mobile Shower

Commode Chair on a side slope as this could cause it to tip.

Ramps and Other Inclines

Ramps and other surfaces that are not level (such as slopes into wheel- in

showers) must be tested with an attendant to ensure that they don’t

compromise the chair’s stability. A qualified healthcare professional should

be consulted to assist with this process.

DO NOT push or pull the EZPZ-AT up or down an incline or ramp

that exceeds a 1:12 grade (5° slope).

DO NOT allow any user to be propelled (pushed or pulled) in an

EZPZ-AT except by an attendant.

ALWAYS CHECK THAT THE EZPZ-AT SHOWER CHAIR IS STABLE

BEFORE IT IS OCCUPIED BY ANY USER AT ANY TIME.

Immersion

The EZPZ-AT Shower Chair is not designed to be used as a pool chair. Do

not immerse the shower chair in whole or in part, in water or any other

liquid. Immersion may result in damage to the shower chair.

Chlorine Exposure

Suitable for use in wet areas, but not pools and similarly corrosive

environments.

DO NOT store the device near pools because chlorine in the air

can cause rust to form on some of the chair’s stainless steel

components.

Transfers

The most dangerous part of using any shower chair is the transfer. Since

every chair has different stability characteristics, it is essential to carefully

review and test the transfer technique to ensure that the procedure is safe.

Test transfers should be performed with an attendant who can prevent the

chair from tipping or moving during the transfer. If you feel that the

transfers cannot be repeatedly performed safely, contact a healthcare

professional who is familiar with transfer techniques and options.

Individuals who have not learned safe transfer skills must seek assistance

during transfers and may require the use of a mechanical lift.

RTD079ENr01 Rev. Date: 2023-05-02

Transferring onto an EZPZ-AT Shower Chair

ALWAYS lock all four casters in an outward position (front casters

positioned in the forward position/rear casters positioned to the rear) for

maximum chair stability.

Transfers should never be attempted with the shower chair

positioned on slippery surfaces. It is recommended that transfers be

performed on clean, dry, non-slippery surfaces. Hard surface flooring such

as tile, wood or concrete may not provide sufficient grip to keep locked

casters from sliding. A fully-carpeted surface is optimal. Be aware that

area rugs and shower mats can slide on floors and thereby present a

hazardous surface.

DO NOT stand on any part of the frame of the EZPZ-AT Shower

Chair.

Tilt Function

ALWAYS check the tilt function and ensure both locking gas springs and release cable assemblies are fully

operational BEFORE the chair is occupied by the user.

A pelvic strap can act as an additional safeguard for the user. A pelvic strap may be ordered as an option with

the EZPZ-AT.

DO NOT attempt to tilt an occupant if the attendant is physically incapable of safely and smoothly

operating the tilt function.

NEVER leave the user unattended in an EZPZ-AT.

The EZPZ-AT is NOT intended for use as a transportation device or a long-term seating system.

IMPORTANT ! l

USERS SHOULD NEVER BE LEFT UNATTENDED IN A RAZ MOBILE SHOWER COMMODE CHAIR.

IMPORTANT ! l

DO NOT LIFT A RAZ MOBILE SHOWER COMMODE CHAIR AND OCCUPANT BY THE ARMRESTS

OR FOOTRESTS!

RTD079ENr01 Rev. Date: 2023-05-02

IMPORTANT !____________

THE EZPZ-AT IS INTENDED FOR THE FOLLOWING USES:

 AS AN AID FOR SHOWERING/BATHING, GOING TO THE TOILET, AND FOR OTHER

ACTIVITIES ASSOCIATED WITH PERSONAL CARE AND PERSONAL HYGEINE;

 AS A SUPPORT FOR THE BODY OF THE USER IN A SEATED POSITION;

 WITH OR WITHOUT THE ASSISTANCE FROM A CAREGIVER;

 TOILETING OVER A STANDARD TOILET, OR AS A COMMODE WITH THE COMMODE PAN

IN INDOOR ENVIRONMENTS ONLY;

 FOR TOILETING AND SHOWERING IN HOME ENVIRONMENTS

THE EZPZ-AT DOES NOT PERFORM ANY THERAPEUTIC OR DIAGNOSTIC FUNCTIONS, AND

IS NOT INTENDED FOR USE FOR ANY THERAPEUTIC OR DIAGNOSTIC PURPOSES. ALL

PRODUCTS WITHIN THE RAZ FAMILY ARE NON-STERILE, REUSABLE, NON-INVASIVE, AND

NON-IMPLANTABLE.

THE EZPZ-AT IS INTENDED TO BE USED BY PEOPLE WITH MOBILITY IMPAIRMENTS, WHO

MAY HAVE DIFFICULTY IN STANDING OR KEEPING THEIR BALANCE WHILE COMPLETING

ACTIVITIES SUCH AS SHOWERING, TOILETING, OR PERSONAL HYGIENE. TYPICAL USERS

HAVE LIMITED ENDURANCE AND POSTURAL CONTROL, AND MAY REQUIRE ASSISTANCE

FROM A CAREGIVER FOR ACTIVITIES SUCH AS SHOWERING, TOILETING, OR PERSONAL

HYGIENE.

RTD079ENr01 Rev. Date: 2023-05-02

LABELS OR SYMBOLS ON THE PRODUCT

PRODUCT

DESIGNATION

ZPZ

MANUFACTURER

ADDRESS

EC-REP DETAIL

PRODUCT

IDENTIFER (PI)

EZAT

XXXXXX

UDI-DI

628758

003052

MEDICAL DEVICE

EUROPEAN

CONFORMITY

DATE OF

MANUFACTURE

MAXIMUM USER

WEIGHT

READ USER

MANUAL

RTD079ENr01 Rev. Date: 2023-05-02

USER & DEALER MANUAL TABLE OF CONTENTS

1.0 GENERAL INFORMATION .................................................................................................................................................. 8

1.1 EZPZ-AT Mobile Shower Commode Chair Overview ..................................................................................................... 8

1.2 EZPZ-AT Mobile Shower Commode Chair Specifications .............................................................................................. 8

2.0 EZPZ-AT Assembly: INTENDED FOR DEALER USE ONLY .................................................................................................... 9

2.1

Back Support Installation ............................................................................................................................................ 9

2.2

Caster Installation ............................................................................................................................................................. 9

2.3

Adjustable Footrest Installation ........................................................................................................................................ 9

2.4

Fastener Installation – Dealer Use Only .......................................................................................................................... 10

3.0 ADJUSTMENTS: ............................................................................................................................................................... 10

3.1 Seat-To-Floor Height Adjustment – EZPZ-AT .................................................................................................................. 10

3.2 Molded Headrest Adjustment .................................................................................................................................... 10

3.3 Adjustable Footrest Adjustment ................................................................................................................................. 11

4.0 USE AND OPERATION ...................................................................................................................................................... 11

4.1 Tilt Function ................................................................................................................................................................ 11

4.2 Soft Foam Overlay Seat ............................................................................................................................................... 11

4.3 Adjustable Footrests ................................................................................................................................................... 12

4.4 Casters ......................................................................................................................................................................... 12

4.5 Commode Pan ............................................................................................................................................................. 12

5.0 CLEANING AND MAINTENANCE ...................................................................................................................................... 13

5.1 Cleaning After Each Use .............................................................................................................................................. 13

5.1.1 Commode Pan ...................................................................................................................................................... 13

5.1.2 Plastic and Soft Seat Overlay ............................................................................................................................... 13

5.2 Cleaning As Needed ................................................................................................................................................ 13

5.2.1 Frame, Armrests, Adjustable Footrests, and Other Components ....................................................................... 13

5.3 Suggested Cleaning Products ...................................................................................................................................... 13

6.0 LIMITED WARRANTY ....................................................................................................................................................... 14

7.0 CONTACTS ....................................................................................................................................................................... 15

RTD079ENr01 Rev. Date: 2023-05-02

1.0 GENERAL INFORMATION

1.1 EZPZ-AT Mobile Shower Commode Chair Overview

1.2 EZPZ-AT Mobile Shower Commode Chair Specifications

EZPZ-AT SPECIFICATIONS

WEIGHT CAPACITY 150 kg / 331 lbs

FRAME WIDTH 50 cm (19.75”)

(seat and back frames)

OVERALL WIDTH 58 cm (23”)

OVERALL LENGTH 108 cm (42.5”)

(with footrests and not tilted)

SEAT WIDTH (commode seat) 50 cm (19.75”)

SEAT DEPTH 43 cm (17”)

(front of back post to front of seat)

CLEARANCE HEIGHT

(over toilet)

with pan brackets: 42-52 cm (16.5”-20.5”)

without pan brackets:

with anti-tippers

44-52 cm (17.5”-20.5”)

Increase 2.5 cm (1”)

ARMREST HEIGHT ABOVE SEAT 23 cm (9”)

(without Soft Seat)

SEAT-TO-FLOOR HEIGHT

With anti-tippers

51-61 cm in 25mm increments

(20”-24” in 1” increments)

54-64 cm in 25mm increments

(21”-25” in 1” increments)

PRODUCT WEIGHT 18 kg (40 lbs)

(with footrests)

FRAME AND HARDWARE MATERIAL Aluminum and Stainless Steel

(Lifetime warranty against corrosion)

MINIMUM TURNING CIRCLE 109 cm (43”)

RTD079ENr01 Rev. Date: 2023-05-02

2.0 EZPZ-AT Assembly: INTENDED FOR DEALER USE ONLY

2.1

Back Support Installation

1. Remove the shower chair from the shipping carton.

2. Remove both snap-pins from base frame.

Easier to remove optional soft seat first to access snap-pins

3. Insert backrest frame into base frame receivers.

4. Line up the hole on the backrest to the base frame.

5. Insert the snap-pins into the holes.

2.2

Caster Installation

1. Remove the casters from the accessory box.

2. Insert the caster extension stem into the lower frame receiver

tube at the desired position.

3. Line up the hole on the frame and to the caster extension stem.

It may be necessary to rotate the caster extension stem in order

to line up the holes.

TIP: Locking the caster first makes this easier.

4. Insert the snap-pin through the frame receiver and the caster

extension stem. Ensure that the pin is inserted completely

through the stem and that the green plastic clip is snapped

securely around the outside of the frame receiver.

5. Repeat steps 2 to 4 for all casters in the assembly.

2.3

Adjustable Footrest Installation

1. Remove footrests from the inner accessory box.

2. Place the footrest hanger tubes into the receivers, welded at

the front of the chair frame.

IMPORTANT !

TELESCOPIC CASTER EXTENSION STEMS ALLOW FOR A HEIGHT ADJUSTMENT RANGE OF 4”. HOWEVER, THE

HIGHER THE CHAIR IS ADJUSTED, THE MORE PRONE IT WILL BE TO TIPPING. CASTERS MUST NEVER BE

ADJUSTED TO DIFFERENT HEIGHTS. AN UNLEVEL CHAIR IS EXTREMELY DANGEROUS FOR ANY USER.

CASTERS SHOULD ALWAYS BE INSTALLED AT THE LOWEST POSITION POSSIBLE WHILE MEETING THE USER’S

NEEDS. ANY POSITION ABOVE THIS WILL RESULT IN A CHANGE IN THE CENTRE OF MASS, WHICH COULD

CAUSE INJURY OR PRODUCT DAMAGE. IT IS HIGHLY RECOMMENDED THAT A QUALIFIED HEALTHCARE

PROFESSIONAL ASSIST IN DETERMINING IF THE USER WILL BE STABLE IN THE SHOWER CHAIR.

RTD079ENr01 Rev. Date: 2023-05-02

2.4

Fastener Installation – Dealer Use Only

All fasteners should be installed securely. Locknuts that are

removed for any reason may need to be replaced rather than

re- used. Check performance of nyloc nuts when re-attaching

to screw. There should be significant detectable resistance

when tightening. If not, replace the nyloc nut with a new one.

It is advisable to check annually that all fasteners are secure.

3.0 ADJUSTMENTS:

3.1 Seat-To-Floor Height Adjustment – EZPZ-AT

The EZPZ-AT Model has four telescopic caster extensions that provide a height adjustment range of 4”.

1. Remove the snap-pin holding the caster extension in place, from the chair frame.

2. Slide the caster assembly to the desired position.

3. Align the holes in the caster extension with the frame holes and insert the snap-pins.

TIP: Locking the caster makes this easier.

4. Ensure that the pins are completely through the frame receivers and that the plastic clips are

snapped securely around the frame receivers.

5. Repeat steps 1 to 4 for all other casters on the chair.

3.2 Molded Headrest Adjustment

A Molded Headrest is included with all EZPZ-AT Shower Chairs. The

Molded Headrest is shaped to cradle the head comfortably and is

easy to clean. The Molded Headrest can be adjusted infinitely forward

and backwards within a 5” range and vertically within a 11½” range.

To adjust the Molded Headrest:

1. Loosen the bottom tri-lobe knob and adjust the headrest

vertical bar.

2. Loosen the top tri-lobe knob and adjust the headrest

horizontally for a fore/aft change in position.

3. Ensure that all knobs are tightened securely for the user’s

safety.

IMPORTANT ! l

ADJUSTMENTS SHOULD NEVER BE ATTEMPTED WITH THE USER IN THE CHAIR.

IMPORTANT !

ALL CASTER STEMS MUST BE ADJUSTED TO THE SAME HEIGHT. NEVER ATTEMPT TO CHANGE THE FRAME ANGLE

BY ALTERING THE CASTER POSITION. UNEQUAL CASTER POSITIONS WILL REDUCE THE CHAIR’S STABILITY AND

MAY RESULT IN TIPPING.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Raz Design Aiuto per il bagno

Raz Design

Raz Design EZPZ-AP Manuale utente

Manuali Aiuto per il bagno popolari di altre marche

Pressalit Care

Pressalit Care R2040 Manuale utente

Invacare

Invacare 9630E Styxo Istruzioni per il montaggio

Leckey

Leckey firefly splashy BIG Manuale utente

NRS Healthcare

NRS Healthcare H85350 Manuale utente

WENKO

WENKO 23285100 Manuale utente

Dietz SmartCare

Dietz SmartCare TAYO Manuale utente

Invacare

Invacare Aquatec Ocean Manuale utente

Roth

Roth Mobeli 1400222H2S Manuale utente

SEVERIN

SEVERIN LB 7220 Manuale utente

ZACK

ZACK CARVO 40510 Manuale utente

Mobilex

Mobilex Kakadu Manuale utente

CareCo

CareCo BA07059 Manuale di programmazione

lopital

lopital Elexo Manuale tecnico

lopital

lopital Tango XL Manuale utente

rainbow care

rainbow care FS697 Manuale utente

ALCO

ALCO AL-70734 Manuale utente

lifestyle mobility aids

lifestyle mobility aids B3600F Manuale utente

Moretti

Moretti MOPEDIA RS910 Manuale utente