RCA RIC108 Manuale utente
Ice Maker
User Manual
MODEL:RIC108,RIC117-SS,RIC118
IMPORTANT SAFEGUARDS........................................................
SAFETY INSTRUCTIONS.............................................................
DESCRIPTION OF PARTS............................................................
BEFORE FIRST USE.....................................................................
USE YOUR ICE MAKER................................................................
CARE AND CLEANING.................................................................
TROUBLESHOOTING GUIDE.......................................................
1
2
3
4
4
6
6
TABLE OF CONTENTS
This ice maker is not designed to keep ice frozen. After each use, remove all
ice cubes, drain the water.
This product is manufactured and sold by Curtis International Ltd.
RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are registered trademarks or trademarks of
RCA Trademark Management and are used under license by Curtis International Ltd.
Any other product, service, company, trade or product name and logo referenced herein are neither endorsed
nor sponsored by RCA Trademark Management or its affiliates
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed including the following
Read all instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against electrical hazards, do not immerse cord, plugs, or the
appliance in water or other liquid.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety.
Close supervision is necessary when any appliance is used by or near children.
Children should be supervised to ensure that they do not play with the
appliance.
Unplug from outlet when not in use and before cleaning or servicing.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the
manufacturer for examination, repair or electrical or mechanical adjustment. All
servicing should be performed by an authorized service representative.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or touch hot surfaces. Do not
let the power cord cross over carpeting or other heat insulators. Do not cover the
cord.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn any control to ‘OFF’, then remove plug from wall outlet.
Do not use appliance for other than intended use.
Do not leave unit unattended while in use.
Plug the Ice Maker into an exclusive grounded 3-prong outlet. No other
appliance should be plugged into the same outlet. Be sure that the plug is fully
inserted into the receptacle.
If the Ice Maker is brought in from outside in wintertime, do not use for a few
hours, allowing the unit to warm up to the room temperature before operating.
Do not clean your Ice Maker with any flammable fluids. The fumes may create a
fire hazard or explosion.
WARNING: Do not touch the Evaporator when the Ice Maker is making ice, it
may burn your skin.
1
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
SAFETY INSTRUCTIONS
This appliance must be plugged into at least a 15 AMP 110-115 VOLT 60 Hz
GROUNDED OUTLET. This appliance must be grounded. It is equipped with a
3-wire cord having a grounding plug. The plug must be plugged into an outlet that
is properly installed and grounded.
Avoid the use of an extension cord because it may overheat and cause a risk of
fire. However, if it is necessary to use an extension cord:
A. Use only 3-wire extension cords with 3-blade grounding plug.
B. The marked rating of an extension cord must be be equal to or greater than the
rating of this appliance.
C. It should be positioned such that it does not drape over the counter or tabletop
where it can be pulled on by children intentionally.
Attempting any maintenance or cleaning:
To minimize the possibility of electric shock, unplug this appliance from the power
suply or disconnect at the household distribution panel by removing the fuse or
switching off the circuit breaker before attempting any maintenance or cleaning.
2
NOTE: Pressing the Power ON/OFF button to an off position does
NOT disconnect the appliance from the power supply.
WARNING!
Improper use of grounded wire can result in the risk of electric shock.
Consult a physician if necessary. Do not attempt to defeat this safety
feature by modifying the plug.
DESCRIPTION OF PARTS
1. Cover
2. Control Panel
a. Add Water Indicator Light
b. Ice Full Indicator Light
c. Power Indicator Light
d. On/Off Button
e. ‘S’ Small Ice Size Indicator Light
f. ‘L’ Large Ice Size Indicator Light
g. Select Button – to choose ice size
3. Ice Basket
4. Water Reservoir (below Ice Basket)
5. Ice Shovel and Evaporator Fingers (behind Ice Shovel)
6. Air Outlet
7. Drain Plug
8. Ice Scoop
3
8
1
3
6
4
7
5
a b
d g
2
c e f
USE YOUR ICE MAKER
Ensure that the Drain Plug underneath the front of the unit is closed and
the Water Tube Screen is in place.
Plug the Ice Maker into the wall outlet and the green power indicator light
will blink (approximately every 5 seconds).
Open the Cover and remove the Ice Basket.
Fill the Water Reservoir. NOTE: Do not fill above the MAX water level
mark at the back of the Water Reservoir.
Replace the Ice Basket and close the Cover.
1.
2.
3.
4.
5.
BEFORE FIRST USE
This portable icemaker uses a fully automatic control system, with an advanced
microcomputer for easy and convenient ice making. Making ice is simple and
fast. Just add water, plug into an outlet, and press the ON button. You can
select one of the two ice cube sizes with the touch of a button. When first
turning on the unit or during icemaking cycles, the compressor will stay idle for
3 minutes, while energizing.
There are warning indicators that alert you to fill water when the reservoir is
empty and to remove ice when the storage basket is full. The icemaker also
has built-in safeguards that can limit accidental damage, automatically shutting
down the system when necessary.
The incline angle of the icemaker cabinet should not exceed 45˚ during
transportation or use. Do not turn the icemaker upside down.
Doing so could cause the compressor or refrigerating system to operate
incorrectly. When the icemaker is moved or transported, please allow time for
the fluids in the compressor to settle. Before using the icemaker for the first
time, please wait 2 hours after the unit has been leveled and positioned in its
proper place.
Please ensure the icemaker is level and on a stable table or platform
to avoid malfunction.
The machine must be placed on a dry and level surface with sufficient
ventilation, far from heat sources such as ovens, heaters and corrosive gases.
Leave an 8-inch clearance on all sides of the icemaker for proper ventilation.
Do not fill the water reservoir with hot water. This may damage the icemaker.
It is best to fill the water reservoir with water of room temperature or lower.
1.
2.
3.
4.
Please read carefully.
4
Press the Power Button and the green indicator light will remain on.
To change between either the small or large ice size, press the Select
Button until the light is lit up beside the desired ice size.
The first ice making cycle will last approximately 8 - 13 minutes
depending on the ice size that is selected. The ice making cycle starts
with water being pumped into the Water Tray situated below the
Evaporator Fingers. Over the next 8 - 13 minutes ice forms on the
Evaporator Fingers. Once this has completed, the Ice Tray will tilt
backwards and the remaining water in the Ice Tray is drained back into the
Water Reservoir. The ice cubes are then dropped from the Evaporator
Fingers and pushed forward into the Ice Basket by the Ice Shovel. The Ice
Tray will automatically move back into position under the Evaporator
Fingers and start the next cycle.
The 'Ice Full' LED light will light up when the ice basket is full and the Ice
Maker will stop the ice making cycle automatically. Gently remove the ice
from the Ice Basket with the Ice Scoop. Once the Ice Basket has been
emptied and the Cover closed, the Ice Maker will restart its ice making
function automatically. IMPORTANT: Wait 3 minutes then press the
Power Button to restart the ice making function.
The ‘Add Water’ LED light will light up when there is no more water in
the Water Reservoir and the ice making cycle will stop automatically. Press
the Power Button once (the Power Button will flash every 5 seconds).
Remove the Ice Basket and add water to the Water Reservoir.
NOTE: Do not fill above the MAX water level mark at the back of the
Water Reservoir. Replace the Ice Basket and close the Cover.
IMPORTANT: Wait 3 minutes then press the Power Button to restart the
ice making function.
When you have finished making ice, transfer the ice to a freezer.
NOTE: The ice will last in the Ice Maker for up to a 18 hour period,
depending on the ambiant temperature. Stop the ice making cycle by
pressing the Power Button. Unplug the unit from the wall outlet.
Open the Cover and allow the Ice Maker to reach room temperature
and follow the directions in the Care and Cleaning section.
6.
7.
8.
9.
10.
5
Stop the Ice Making Cycle by pressing the Power Button and the green LED
light will go out. Unplug the Ice Maker from the wall outlet. Allow the unit
to warm up to room temperature.
If the Water Tray is not in the vertical position behind the Evaporator
Fingers, gently push the Water Tray back so that all water drains into the
Water Reservoir.
Open the Drain Plug to drain out excess water.
Remove the Ice Basket.
Remove the Water Tube Screen and rinse under running water.
Clean the Ice Maker interior with a soft cloth dampened in warm water and
vinegar. Rinse with a clean damp cloth.
Replace the Drain Plug and the Water Tube Screen. Wash the Ice Basket
and Ice Scoop in warm soapy water. Rinse and dry.
Clean the exterior of the Ice Maker with a soft damp cloth. Use a mild
dishwashing soap, if necessary.
IMPORTANT NOTE: Do not clean the Evaporator Fingers.
1.
2.
3.
4.
5.
6.
7.
8.
9.
CARE AND CLEANING
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSES SOLUTION
“ADD WATER”
indicator light turns on.
Low water level or lack
of water.
Add water and the
icemaker will operate
automatically.
Check that the plug is
plugged into the electrical
outlet.
Disconnection of plug.There is no indication
on the control panel.
6
“Ice Full” and “Add Water”
indicators light up
simultaneously.
The “Ice Full” indicator
light is on.
The unit does not
operate.
Ice blockage. No ice is
being made.
The icemaking cycle
seems normal but no ice
is produced.
There is refrigerant
leakage. A pipe in the
cooling system is blocked.
Consult a qualified
technician or call
Customer Service.
Making ice takes too
much time.
Turn off the machine.
Start the machine after
the ice block melts. Or
change the size selector
to small ice cubes.
The ice basket is full.
Power is not being
supplied to the unit.
The ambient temperature
or the water temperature
is too high.
Remove ice from the ice
storage basket to make
more.
Plug the unit into a
standard 110/120 Volt,
60 Hertz power source.
Please run the icemaker
in temperatures below
90°F and/or pour colder
water into the water
reservoir.
Electrical Power Surge
or There may be air in
the lines or the lines are
blocked. The water tank
cannot detect water level.
Turn off the icemaker, pull
out the electric plug, fill it
with water if needed,
replace the plug and then
restart the unit. or
Inspect relative parts;
remove the drain cap on
the back of the unit and
drain out a small amount
of water. Replace the
drain cap and attempt to
use the unit again.
or
Check if ice is blocking the
ice pusher. Turn off the
unit; let the ice melt and
restart.
7
appareil à glaçon
Manuel de l'utilisateur
MODÈLE:RIC108,RIC117-SS,RIC118
IMPORTANT SAFEGUARDS........................................................
CONSIGNES DE SÉCURITÉ IMPORTANTES.............................
DESCRIPTION DES PIECES.......................................................
AVANT LE PREMIER USAGE.......................................................
MODE D’EMPLOI..........................................................................
NETTOYAGE ET ENTRETIEN......................................................
PROBLÈMES ET SOLUTIONS.....................................................
1
2
3
4
4
6
6
TABLE DES MATIERES
Cette machine à glaçons n'est pas conçue pour conserver la glace congelée.
Après chaque utilisation, enlever tous les cubes de glace, vider l'eau.
Ce produit est fabriqué et vendu par Curtis International Ltd.
RCA, le logo de la RCA, le logo de deux chiens (Nipper et Chipper), sont des marques déposées ou des
marques déposées de marque RCA Gestion et sont utilisés sous licence par Curtis International Ltd.
Tout autre produit, service, entreprise, commerce ou produit nom et le logo mentionnés aux présentes
ne sont ni approuvés ni sponsorisés par Gestion de marque RCA ou de ses filiales.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Lorsqu’on utilise un appareil électrique, il faut toujours respecter
certaines règles de sécurité fondamentales, notamment les
suivantes
Lire toutes les instructions.
Ne pas toucher aux surfaces chaudes. Utiliser les poignées ou les boutons.
Pour éviter le risque de secousses électriques, ne pas immerger le cordon, la
fiche ou l’appareil dans l’eau ou tout autre liquide.
Cet appareil ne doit pas être utilisé par des personnes (y compris des enfants)
dont les facultés physiques, sensorielles ou mentales sont diminuées ou qui
manquent d’expérience ou de connaissances, à moins qu’elles soient sous la
surveillance d’une personne responsable qui les guidera dans l’utilisation de
l’appareil.
Une surveillance étroite est nécessaire quand l'appareil est utilisé par ou près
des enfants. S'assurer que les enfants ne puissent jouer avec l'appareil.
Débrancher de la prise murale quand l'appareil n'est pas utilisé, avant le
nettoyage ou l’entretien.
Ne faire fonctionner aucun appareil avec un cordon ou une fiche endommagé,
après que l'appareil ait mal fonctionné ou ait été endommagé de quelque
façon. Retourner l'appareil au manufacturier pour être examiné, réparé ou
ajusté. Tout service doit être exécuté par un représentant autorisé.
Ne pas utiliser l’appareil à l’extérieur.
Ne pas laisser pendre le cordon du bord de la table ou du comptoir, ni toucher
des surfaces chaudes. Ne pas laisser le cordon traverser un tapis ou tout autre
isolant thermique. Ne pas couvrir le cordon.
Ne pas placer cet appareil sur ou près d'un brûleur à gaz ou électrique chaud, ni
dans un four chaud.
Toujours attacher le cordon à l’appareil d’abord, ensuite le brancher dans la
prise murale. Avant de débrancher, mettre la commande à la position “ OFF ”
puis retirer le cordon de la prise murale.
Ne pas utiliser l’appareil à d’autres fins que celle pour laquelle il a été conçu.
Ne pas laisser l'appareil sans surveillance lorsqu’il est en fonction.
Brancher l’appareil à glaçons dans une prise murale triphasée, avec mise à la
terre, dédiée exclusivement à cet appareil. Aucun autre appareil ne doit être
branché dans la même prise. S’assurer que la fiche est bien insérée dans la
prise murale.
Si l’appareil est apporté de l’extérieur durant l’hiver, attendre quelques heures
avant de l’utiliser. Ne l’utiliser que lorsque l’appareil a atteint la
température ambiante.
Ne pas nettoyer l’appareil avec des liquides inflammables. Les émanations
peuvent causer un feu ou une explosion.
ATTENTION : Ne pas toucher à l’évaporateur lorsque l’appareil fabrique des
glaçons. On risque des brûlures.
1
CONSERVER CES INSTRUCTIONS
USAGE DOMESTIQUE SEULEMENT
Altri manuali per RIC108
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
Altri manuali RCA Macchina per il ghiaccio
