Reach Bee9+ Manuale utente
版权所有©深圳锐取信息技术股份有限公司
Reach Bee9+ System
User’s Manual
SZ REACH TECH CO., LTD.
2/ 39
SZ Reach Tech Co., Ltd.
© SZ Reach Tech Co., Ltd., 2018. All rights reserved.
Any part of this document, including text, pictures, graphics, etc., belongs to SZ Reach Tech Co., Ltd. No
person or group may reproduce any part of this document in any way without the written consent of SZ Reach Tech
Co., Ltd. SZ Reach Tech Co., Ltd. reserves the right to modify this document, but it is not obligated to notify any
person or group of such modification.
The company only provides limited warranty for hardware and software products. For any loss of users caused
by the design defect of software and hardware, the company shall make compensation at the highest price specified
in the contract price of the products purchased.
Trademark statement
Reach, REACH, , Beyonsys™ , Powolive™, Reach Software, etc are the trademarks of SZ Reach
Tech Co., Ltd.; Windows, Windows 95, Windows 98, Windows NT, Windows 2000, Windows 2003, Windows XP,
Windows 7 are the trademarks of Microsoft Corporation of the United States; Other trademarks are owned by the
corresponding company.
Note
This Manual is formulated in order to ensure that you can better install and configure this product. Before using
this product, please read this Manual carefully to make full use of all functions of this product.
The contents of this Manual will be updated irregularly without prior notice. If you can’t solve the problem in
accordance with the manual, please contact us to inquire a relevant operation method, thank you!
SZ REACH TECH CO., LTD.
3/ 39
Contents
Contents
1Product Introduction 5
1.1 System connection diagram 5
1.2 Bee9+ host 5
1.3 4.3-inch serial port touch screen CS-100 (standard) 7
2Supporting software of recorder host 8
2.1 ReachDirector 8
2.2 ReachDownload 8
2.2.1 Login operation 8
2.2.2 File batch management 9
2.3 KiteTool 10
2.3.1 Login operation 11
2.3.2 Interface operation 12
3Web configuration of micro recorder host 13
3.1 Login device 13
3.2 File management 16
3.4 Video setting 17
3.5 System configuration 21
3.6 System information 25
3.7 Log out 26
3.8 Download center 26
4Type and configuration of classroom 26
4.1 Common video classroom Error! Bookmark not defined.
4.2 Interactive video classroom 27
4.2.1 Configuration of interactive classroom 27
SZ REACH TECH CO., LTD.
4/ 39
4.2.2 Purpose of interactive classroom 29
4.2.3 Lecture classroom 29
4.2.4 Listening classroom 29
4.3 Third-party-involved video classroom 30
4.3.1 Third-party-involved lecture-giving room 30
4.3.2 Third-party-involved lecture-receiving room 31
5Director system
Error! Bookmark not defined.
5.1 Network director system 31
5.1.1 Enter the network director system 31
5.1.2 PTZ control 33
5.1.3 Recording control 33
5.1.4 Multi-picture composite 35
5.1.5 Video setting Error! Bookmark not defined.
5.2 Local director system (based on conventional classroom) 37
5.2.1 Operation of local director system 37
5.2.2 Difference between the local director system and the network director system 37
6Automatic tracking 38
6.1 Configuration of tracking camera 38
6.2 KiteTool 38
6.3 Auto tracking 39
SZ REACH TECH CO., LTD.
5/ 39
1Product Introduction
The Bee9+ recorder system is a device used for front-end teaching and the release and application of back-end
video resources. It is able to track the positioning of teachers, and includes a four-camera tracking scheme: a close of
view of the teacher, panoramic view of students, panoramic view of teachers and students' close-up.
With build-in input and output interfaces such as HD video, audio, VGA, USB, etc., the Bee9+ recorder system
automatically identifies signal sources, records and generates universal MP4 video files. The system can be easily
managed and controlled by Web, directing console, professional media center, panel buttons and third-party central
control devices.
1.1 System connection diagram
1.2 Bee9+ host
The front panel of the tracking recorder host is shown below:
SZ REACH TECH CO., LTD.
6/ 39
1
USB interface
2
2 inch LCD panel (display version
number, IP information)
3
Option key
4
Option key
5
Option key
6
Option key
7
Main interface key
8
ON/OFF key, touch to display IP
The interface on the back of the tracking recorder host are shown below:
1
SPK OUT output AEC REF＋LINE sound
2
AEC OUT output MIC IN＋LINE sound
3
LIN OUT output MIC IN＋LINE IN＋AEC
REF sound
4
Control interface. The last 12V power supply
interface is the external 4.3-inch control panel
5
USB interface
6
VIDEO input (reserved)
7
VGA input
8
VGA output (director picture)
9
Audio MIC input (microphone)
10
Echo suppression/remote reference signal
11
Audio LINE input (laptop, DVD)
12
Reset to Factory Defaults
13
Audio input/output (reserved)
14
HDMI input
15
3G-SDI input (video conference input)
16
3G-SDI input (student panorama input)
17
3G-SDI input (platform panorama input)
18
3G-SDI input (student close-up input)
18
3G-SDI input (teacher close-up)
19
HDMI output (video conference)
SZ REACH TECH CO., LTD.
7/ 39
19
HDMI output (video conference)
21
Network interface
22
Power input
23
1.3 4.3-inch serial port touch screen CS-100 (standard)
4.3-inch touch screen is shown as follows:
⚫It is a standard 4.3-inch serial port touch screen - connect to 12V power supply on Line 8 of Bee9+
serial port.
⚫The screen automatically opens after starting up, and allows control of the device’s On/Off, VGA lock
and video dotting.
⚫Also controls the start, pause, and stop of video recording.
⚫Note: the connection line sequence of serial port center control and Line 8 of serial port on the back
panel of the recorder host is: the G/T/R/V at the serial port remains unchanged, and the T/R at the
recorder host port needs to be crossed. Serial port G/T/R/V------ -- -G /R/T/V recorder port.
SZ REACH TECH CO., LTD.
8/ 39
2. Supporting software of recorder host
2.1 ReachDirector
ReachDirector is a recording control tool that integrates the view of the access signal source, recording control,
PTZ control, director mode setting, multi-image synthesis and switching animation effects. The integrated machine
can be used to direct output image and other operations. For details, please refer to the Introduction of Director
System.
2.2 ReachDownload
Reachdownload is used for file downloading and deleting of those recorded.
2.2.1 Login operation
(1) Server IP address: the IP address of matching recorder;
(2) User name and password: the login user name and password for the matching recording;
SZ REACH TECH CO., LTD.
9/ 39
(3) Language: either simplified Chinese or English can be selected.
2.2.2 Stored files management
1. Download: download the selected file to device;
2. Pause: suspend the downloading process;
3. Delete: delete the file from recordings;
4. Directory: open the directory for currently downloaded files;
5. Refresh: real-time files list;
6. Search: search files according to it’s name;
7. Resource types: resource mode, movie mode and resource & movie mode are optional for downloading.
8. Download mp4 files only: download mp4 files only instead of the entire file directory.
SZ REACH TECH CO., LTD.
10 / 39
9. Download path: choose to download the files to the local directory or disk C, which is the default;
10. Downloading: the file you are downloading can be viewed on the “Downloading” page. Click “Cancel” to
cancel the download if needed.
11. Completed: the downloaded file is displayed on the “Completed” page.
2.3 KiteTool
An automatic tracking software debugging tool.
Double-click to run the kt_tools.sfx. exe file after downloading KiteTool.
Indice
