REALINN RL3200CB Manuale utente
Before starting using this reader, please read the instruction
carefully and do not arbitrarily scan the setting barcodes
otherwise some settings may temporarily not functioning.
Please keep this user manual properly.
Technical support:
server@realinn.cn
realinn@126.com
Please write down the scanner model and the detailed
information of the barcode scanner problem, which will help us
understand the specific problem and send you a solution in
time.
Contents
Technical Parameter
.........................
.....
1
Packing List
.........................
....
2
Product Introduction
.........................
....
2
Mode Indicator
.........................
....
2
Screen Time Setting
.........................
....
3
Button Function Instruction
.........................
3
Quick Start Guide
.........................
....
3
1. Pairing Mode
.........................
....
5
1.1 Bluetooth Pairing
.........................
....
5
1.2 2.4G Wireless Pairing
.........................
....
7
1.3 Wired Mode
.........................
....
9
Charging the scanner
.........................
....
9
FAQs
.........................
....
11
Optional Function settings
.........................
....
14
1. Scanning Modes
.........................
....
14
2. Uploading Modes
.........................
....
15
3. Auto Power Off Setting
.........................
....
17
4. Capital & Lowercase Switch
.........................
...
17
5. Beep Tone Setting
.........................
...
18
6. Decoding Volume Setting
.........................
...
18
7. Terminator Setting
.........................
...
18
8. Vibrate Setting
.........................
...
19
9. Resetting Standard Product Default
.........................
19
10. Input Method Setting
.........................
...
20
11. Time Stamp
.........................
...
21
12. Identify Barcode Type
.........................
...
22
13. Barcode Type On/Off
.........................
23
14. Insert and Delete Characters
.........................
28
ASCII Table
.........................
...
30
1
Technical Parameter
Model-Number
RL3200CB
Connection
Bluetooth + 2.4GHz Wireless + Wired
Distance
≤50m （Bluetooth），≤100m （Wireless）
Memory
16M = 100000 barcodes
Battery capacity
1500mAh
Sensor
CCD Image Sensor
Working current
3.5V
Charging power
5V-400mA
Printing Contract
>25%
Decoding accuracy
≥3.3mil@PCS90% CODE39
LED life
10000 hours
Button life
8000,000 times
Trigger Mode
Manual Trigger, Continuous Scanning, Auto-Sensing
Upload mode
Instant upload mode, Storage mode
Working time
Full load≈18hours, Normal use ≈3 to 10 days
CPU
ARM 32-bit Cortex
Indication
Buzzer，LED，Vibrate
Scanning angle
Angle of rotation36°, inclination± 60°,declination ± 60°
Drop test
2.0m
Working Temperature
-20℃ to 50℃
Barcode Type
1D: UPC, EAN, Code39, Code32, Codabar, Code128,
Code93, Interleaved 2 of 5, ITF14, Industrial 2 of 5,
Standard 2 of 5, Code 11, MSI/Plessey, GS1 Databar,
Matrix 2 of 5.
2
Packing List
Barcode Scanner * 1, Mini USB receiver * 1, Micro-USB Cable * 1
User Manual * 1, Short lanyard * 1, Long lanyard * 1
Product Introduction
Mode Indicator
Slow Blinking
Quick Blinking
2.4G Wireless indicator
2.4G Wireless Mode
2.4G Wireless Pairing Status
Bluetooth indicator
Bluetooth Mode
Bluetooth Pairing Status
Eyelets for threading the
provided lanyards
3
Screen Time Setting
Please visit the website : http://www.barcoderead.net/time.html
Scan the setting code on the screen to adjust the time which
displayed on the screen of scanner. The time displayed on this web
page is synchronized with the time displayed on your computer.
Please ensure that the time displayed on your computer is correct.
Button Function Instruction
By default, the functions of Button 1 and Button 3 are turned off.
Before opening the button function, please read the introduction
about button operation in detail.
Button 1 : (Turn Off By Default)
(1) Press Button 1 for 1 second - Instant upload mode / Storage
mode switch
(2) Press Button 1 for 8 seconds - Upload stored data
Button 2 :
(1) Press Button 2 for 1 second - Turn on the bar code scanner / Scan
barcodes
(2) Press Button 2 for 8 seconds - Turn off the bar code scanner
Button 3 : (Turn Off By Default)
(1) Press Button 2 for 1 second - 2.4Ghz wireless mode / Bluetooth
mode switch
(2) Press Button 2 for 8 seconds - Linking to a Host
Turn on/off Button function:
Note 1
:The function of button 1, 3 is turned off by default.
Please scan the setting bar code“Button 1,3 - On”before using
Button 1 and Button 3.
Note 2
: To prevent pressing Button 1 or Button 2 by mistake during
scan barcodes, please scan the setting code “Button 1,3-off ”.
Button 1,3 - On
Button 1,3-off*
4
1. How to link the reader to a Bluetooth ready device
through the operation button ?
(1) Press Button 2 to wake up the bar code scanner.
(2) Press Button 3 for 1 second to switch the pairing mode to
Bluetooth Pairing mode.
(3) Press Button 3 for 8 seconds. The Bluetooth indicator flashing
quickly indicates that the scanner is discoverable by the Host.
( Alternatively, you can scan setting codes“Bluetooth HID”and
“ Pairing”in order, and then the bar code scanner will become
automatically discoverable by the Host. See Bluetooth Pairing on
page 5)
(4) On the Host,use the dedicated Bluetooth application to search for
new devices. Select the”Bar Code Scanner HID”from the list of
available devices. If you receive an error message, it may be necessary
to disable security on the device.
(5) When the scanner finish pairing with the Host, the Bluetooth
indicator remains on and the buzzer beeps “di”.
2. How to switch the pairing mode from Bluetooth mode to
Wireless mode ?
(1) Press Button 2 to wake up the bar code scanner.
(2) Press Button 3 for 1 second to switch the paring mode to 2.4GHz
Wireless Pairing mode. The 2.4GHz wireless indicator shows up.
(3) Press Button 3 for 8 seconds. The 2.4GHz Wireless indicator
flashing quickly that the scanner is ready to connect to the device.
(4) Insert the USB receiver into USB port of device ( Make sure the
USB receiver is recognized by the device)The bar code scanner will
pair to the device automatically, the 2.4GHz Wireless indicator will
remains on and the buzzer beeps”di” ( If the 2.4GHz wireless
indicator keep flashing, please follow the 2.4GHz Wireless Paring
Mode introduction on page 7 to operate the scanner )
Note
: After switching to Bluetooth Pairing Mode, the scanner will
pair to the previous paired device automatically. If not, please operate
“ forget the device “on the Bluetooth application of device and
then follow Bluetooth Pairing introduction on page 5 to re-connect
the device.
5
Quick Start Guide
The RL3200CB scanner has three connection modes: Bluetooth
Pairing Mode + 2.4GHz Wireless Mode + Wired Mode
It is suggested to use 2.4GHz Wireless Mode & Wired mode on
computers, use Bluetooth Wireless mode on the smart phones,
tablets.
Pairing Mode
1.1 Bluetooth Pairing
To pair with a Bluetooth enabled host:
Step 1. Press the Button 2 to wake up the bar code scanner. Scanner
beeps at a series of high frequency tones.
Step 2. Scan below “ Bluetooth HID ” and “ Pairing “ codes in
order. The Bluetooth indicator blinks quickly indicating that the
scanner is discoverable by the Host.
Step 3.On the Host, use the dedicated Bluetooth application to
search for new devices. Select the “ Bar Code Scanner HID” from
the list of available devices. When the scanner finish pairing with the
Host, the Bluetooth indicator remains on and the buzzer beeps
“di”.
Step 4. Scan “ Instant upload mode” code allow the scanner to
upload barcodes to host instantly.
Bluetooth HID
Pairing
6
Instant upload mode
Step 5. Open the Notepad or Word in the Host, put the cursor on the
blank, read labels for testing. When scanner decodes successfully
r,the scanner will beeps once and vibrates once( The beeper and
vibration indication can be turned off. See Decoding Volume Setting
on page 18 and Vibrate setting on page 19)
Note
：After pairing to the Host, the keyboard in the Host will not
appear automatically.
For iOS keyboard:
Method 1:
To show or hide the iOS keyboard , please scan below
“Show/Hide iOS keyboard”
Method 2:
Double click Button 2 twice quickly to show or hide the iOS
keyboard. This button function is able to turn off if users do not need
it.
** To show the
Android keyboard on in the Host, it needs to install the “CILICO
Bluetooth barcode input method” APP. Please contact us
Note 3
: When uploading the barcode to the host, if some characters
Show/Hide iOS keyboard
Double Click Show/Hide iOS keyboard-On *
Double Click Show/Hide iOS keyboard-Off
Indice
