Realistic 42-2105 Manuale utente
L
0 TAPE IN
SW
2 0.
d
o
ll
OFF
0 TAPE IN
SW 3 0.
A
l OFF
SW I
TAPE IN
I
OFF
SW 7
0 0
OUT IN
OUT IN
TAPE I
TAPE 2
OUT IN
OUT IN
0 0
0 0
OUT IN
TAPE 3
OUT IN
LEFT CHANNEL SAME AS RIGHT (
ABOVE I
OUT IN
RECEIVER
OUT IN
0 0
RADIO SHACK LIMITED WARRANTY
This product is warranted .against defects for 90 days from date of purchase from Radio
Shack company-owned stores and authorized Radio Shack franchisees and dealers. Within
this period, we will repair it without charge for parts and labor. Simply
bring your Radio
Shack sales slip
as proof of purchase date to any Radio Shack store:Warranty does not
cover transportation
costs.
Nor does it cover a product subjected to misuse or accidental
damage.
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some. states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
We Service What We Sell
SCHEMATIC DIAGRAM
TAPE CONTROL CENTER
RADIO SHACK, A DIVISION OF TANDY CORPORATION
U.S.A.: FORT WORTH, TEXAS 76102
CANADA: BARRIE, ONTARIO L4M 4W5
TANDY CORPORATION
91 KURRAJONG
AVENUE
PARC INDUSTRIEL DE NANINNE
BILSTON ROAD WEDNESBURY
CAT. NO.
MOUNT DRUITT, N. S.
W.
2770
5140 NANINNE
WEST MIDLANDS WS10 7JN
CUSTOM MANUFACTURED FOR RADIO SHACK A DIVISION OF TANDY CORPORATION
42-2105
1A3
Printed in Korea
With this professionally designed Tape
Control Center you can easily duplicate
recordings onto up to 3 decks at one time.
And if the decks are the 3-head type, you
can monitor any one of the three signals
without affecting the other deck(s) or the
Receiver/Amplifier. You can also dub from
one deck to another — or mix signals vie
switching.
All functions are illustrated on the clearly
labled panel. Connections are via standard
RCA jacks.
INPUT
4---FROM
RECEIVER
TAPE IN
OFF
DUB IN
DUB OUT
OFF
TAPE OUT
DEC
J
DECK
K
DECK
2
W
DECK
OFF
OFF
DECK
3
0
OFF
OFF
Recording by
0
DECK 1,2.
I
0000
0 !I 0
0000
,
Recording by
DECK 2.
Recording on DECK 2
from DECK 1.
1060
[M000
Recording on DECK 3
from DECK 1,2.
Recording on DECK 1,3
from DECK 2.
606
0000
NOTE: Again, you can Monitor either the original or Dub tape by setting MONITOR down or up.
Monitoring
Setting MONITOR up or down will result in the signal from Dub source (up) or Tape Out jacks of selected
Deck(s).
Monitor-
DECK 1.
000
6006
Monitor-
Recording on DECK 2
from DECK 1.
060
M001!
Simultaneous Functions
While recording
receiver on
DECK 2,
recording on DECK 3
from DECK 1.
01%1
M000
While recording on
DECK 2 from
DECK 3,
playing DECK 1.
060
60M6
0
0 0 0 0 0
RECEIVER
TAPE DECK
3
TAPE, DECK 2
TAPE DECK
While recording
receiver on
DECK 1,2
playing DECK 3.
As you can see from these few examples, the use and application of this Tape Control Center is almost
limitless; the extreme versatility of switching will permit many combinations.
SWITCH FUNCTIONS (notice Front Panel graphics)
The top row of switches determines the Input connection to the three Decks:
•
When Up, the Deck(s) is connected to the Receiver/Amplifier
•
In the center position, the Deck(s) is not connected (off)
•
In the Down position, the Deck(s) is connected to a Dubbing Buss
The lower row of switches determines the Output connection of the three Decks:
•
When Up, the Deck(s) is connected to a Dubbing Buss
•
In the center position, the Deck(s) is not connected (off)
•
In the Down position, the Deck(s) is connected to the Output
The switch at the right has 2-positions and determines the signal being passed on to the Receiver/Amplifier
for Monitor sound:
•
In the Up position, the Receiver/Amplifier will monitor output from the Dubbing Buss
•
In the Down position, the Receiver/Amplifier will monitor output from Decks 1, 2 and/or 3
USING THE TAPE CONTROL CENTER
Recording from Receiver
Flip up appropriate upper switch (es)
CONNECTING THE UNIT
Make connections as illustrated (using shielded cable). The decks need not be open-reel type — they can be
cassette or 8-track (or any combination of tape decks).
NOTE: If Deck is 3-head type, you can Monitor.the Output by setting MONITOR switch down.
Dubbing Tapes
To dub (copy) from one Deck to another, set switches as follows:
Altri manuali per 42-2105
1
Altri manuali Realistic Controllori
