Realtek AmebaPro2 RTL8735B Manuale utente
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
1
AmebaPro2 Amazon FreeRTOS-LTS
- Getting Started Guide
Realtek Semiconductor Corp.
No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: +886-3-578-0211. Fax: +886-3-577-6047
www.realtek.com
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
2
COPYRIGHT
© 2019 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form or by any means without the written permission of Realtek Semiconductor Corp.
DISCLAIMER
Please Read Carefully:
Realtek Semiconductor Corp., (Realtek) reserves the right to make corrections, enhancements, improvements and other changes to its
products and services. Buyers should obtain the latest relevant information before placing orders and should verify that such information is
current and complete.
Reproduction of significant portions in Realtek data sheets is permissible only if reproduction is without alteration and is accompanied by all
associated warranties, conditions, limitations, and notices. Realtek is not responsible or liable for such reproduced documentation. Information
of third parties may be subject to additional restrictions.
Buyers and others who are developing systems that incorporate Realtek products (collectively, “Customers”) understand and agree that
Customers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that
Customers have full and exclusive responsibility to assure the safety of Customers' applications and compliance of their applications (and of all
Realtek products used in or for Customers’ applications) with all applicable regulations, laws and other applicable requirements. Designer
represents that, with respect to their applications, Customer has all the necessary expertise to create and implement safeguards that (1)
anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might
cause harm and take appropriate actions. Customer agrees that prior to using or distributing any applications that include Realtek products,
Customer will thoroughly test such applications and the functionality of such Realtek products as used in such applications.
Realtek’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation kits, (collectively, “Resources”) are intended to assist
designers who are developing applications that incorporate Realtek products; by downloading, accessing or using Realtek’s Resources in any
way, Customer (individually or, if Customer is acting on behalf of a company, Customer’s company) agrees to use any particular Realtek
Resources solely for this purpose and subject to the terms of this Notice.
Realtek’s provision of Realtek Resources does not expand or otherwise alter Realtek’s applicable published warranties or warranty disclaimers
for Realtek’s products, and no additional obligations or liabilities arise from Realtek providing such Realtek Resources. Realtek reserves the
right to make corrections, enhancements, improvements and other changes to its Realtek Resources. Realtek has not conducted any testing
other than that specifically described in the published documentation for a particular Realtek Resource.
Customer is authorized to use, copy and modify any individual Realtek Resource only in connection with the development of applications that
include the Realtek product(s) identified in such Realtek Resource. No other license, express or implied, by estoppel or otherwise to any other
Realtek intellectual property right, and no license to any technology or intellectual property right of Realtek or any third party is granted herein,
including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination,
machine, or process in which Realtek products or services are used. Information regarding or referencing third-party products or services does
not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of Realtek Resources may require a license
from a third party under the patents or other intellectual property of the third party, or a license from Realtek under the patents or other
Realtek’s intellectual property.
Realtek’s Resources are provided “as is”and with all faults. Realtek disclaims all other warranties or representations, express or implied,
regarding resources or use thereof, including but not limited to accuracy or completeness, title, any epidemic failure warranty and any implied
warranties of merchantability, fitness for a particular purpose, and non-infringement of any third party intellectual property rights.
Realtek shall not be liable for and shall not defend or indemnify Customer against any claim, including but not limited to any infringement claim
that related to or is based on any combination of products even if described in Realtek Resources or otherwise. In no event shall Realtek be
liable for any actual, direct, special, collateral, indirect, punitive, incidental, consequential or exemplary damages in connection with or arising
out of Realtek’s Resources or use thereof, and regardless of whether Realtek has been advised of the possibility of such damages. Realtek is not
responsible for any failure to meet such industry standard requirements.
Where Realtek specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Customers must ensure
compliance with safety-related requirements and standards applicable to their applications. Designer may not use any Realtek products in life-
critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical
medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death. Such equipment
includes, without limitation, all medical devices identified by the U.S.FDA as Class III devices and equivalent classifications outside the U.S.
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
3
Customers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Customers’own risk. Customers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Customer will fully indemnify Realtek and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-
compliance with the terms and provisions of this Notice.
TRADEMARKS
Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are trademarks/registered trademarks
of their respective owners.
USING THIS DOCUMENT
Though every effort has been made to ensure that this document is current and accurate, more information may have become available
subsequent to the production of this guide.
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
5
1.2 PCB Layout Overview
The PCB layout of AmebaPro2 is shown in Fig 1-1.
Fig 1-1 Demo board −PCB layout (2D)
1.3 Log UART
The USB Type-C log UART is shown in Fig 1-2.
Fig 1-2 Demo board –log UART
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
6
2Configure AWS IoT Core
2.1 Set up your AWS account and Permissions
Refer to the instructions at Set up your AWS Account https://docs.aws.amazon.com/iot/latest/developerguide/setting-up.html. Follow the
steps outlined in these sections to create your account and a user and get started:
Sign up for an AWS account
Create a user and grant permissions
Open the AWS IoT console
Please pay special attention to the Notes in AWS webpage.
2.2 Create a New Device
To create a new device, navigate to Manage -> Things in the left-hand navigation menu. Then click “Create things”.
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
7
Then, name the new device. This example uses the name TestDevice.
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
8
Skip this part and “Create thing”, we will attach the policies to certificate later.
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
9
Download the certificate, public key, and private key for the device by clicking Download. Next, download the root CA for AWS IoT by clicking
to the Download link. Once all the certificate and keys have been downloaded, click Done
1
3
4
2
AmebaPro2 Getting Started Guide
Getting Started Guide All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
10
2.3 Create a policy
A policy defines a device’s access permissions to IoT Core. To create a policy, navigate to Secure -> Policies. Then click “Create policy”
Note: this policy grants unrestricted access for all iot operations, and is to be used only in a development environment. For non-dev
environments, all devices in your fleet must have credentials with privileges that authorize intended actions only, which include (but not
limited to) AWS IoT MQTT actions such as publishing messages or subscribing to topics with specific scope and context. The specific permission
policies can vary for your use cases. Identify the permission policies that best meet your business and security requirements.
For sample policies, refer to https://docs.aws.amazon.com/iot/latest/developerguide/example-iot-policies.html.
Also refer to https://docs.aws.amazon.com/iot/latest/developerguide/security-best-practices.html
Indice
Altri manuali Realtek Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
